https://bugzilla.novell.com/show_bug.cgi?id=173647 sbrabec@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|sbrabec@novell.com | ------- Comment #6 from sbrabec@novell.com 2007-05-28 10:25 MST ------- Here it is. See also comment #1. 14: PCI 06.0: 0200 Ethernet controller [Created at pci.286] UDI: /org/freedesktop/Hal/devices/pci_10ec_8139 Unique ID: JNkJ.IQxIdIhhuH7 SysFS ID: /devices/pci0000:00/0000:00:06.0 SysFS BusID: 0000:00:06.0 Hardware Class: network Model: "Realtek RT8139" Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd." Device: pci 0x8139 "RTL-8139/8139C/8139C+" SubVendor: pci 0x10ec "Realtek Semiconductor Co., Ltd." SubDevice: pci 0x8139 "RT8139" Revision: 0x10 Driver: "8139too" Driver Modules: "8139too" Device File: eth1 I/O Ports: 0xd000-0xd0ff (rw) Memory Range: 0xdfffef00-0xdfffefff (rw,non-prefetchable) Memory Range: 0xdffd0000-0xdffdffff (ro,prefetchable,disabled) IRQ: 11 (105134 events) HW Address: 00:50:fc:33:ce:ba Link detected: yes Module Alias: "pci:v000010ECd00008139sv000010ECsd00008139bc02sc00i00" Driver Info #0: Driver Status: 8139too is active Driver Activation Cmd: "modprobe 8139too" Driver Info #1: Driver Status: 8139cp is active Driver Activation Cmd: "modprobe 8139cp" Config Status: cfg=no, avail=yes, need=no, active=unknown 18: PCI 08.0: 0282 WLAN controller [Created at pci.286] UDI: /org/freedesktop/Hal/devices/pci_1260_3873 Unique ID: Kbch.1o+tnlD7E2E SysFS ID: /devices/pci0000:00/0000:00:08.0 SysFS BusID: 0000:00:08.0 Hardware Class: network Model: "Intersil Prism 2.5 Wavelan chipset" Vendor: pci 0x1260 "Intersil Corporation" Device: pci 0x3873 "Prism 2.5 Wavelan chipset" SubVendor: pci 0x1260 "Intersil Corporation" SubDevice: pci 0x3873 Revision: 0x01 Driver: "hostap_pci" Driver Modules: "hostap_pci" Device File: wifi0 Device Files: wifi0, wlan0 Features: WLAN Memory Range: 0xdfdff000-0xdfdfffff (rw,prefetchable) IRQ: 12 (21001 events) HW Address: 00:60:b3:6b:d3:c5 WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 WLAN bitrates: 1 2 5.5 11 WLAN encryption modes: WEP40 WEP104 WLAN authentication modes: open sharedkey Module Alias: "pci:v00001260d00003873sv00001260sd00003873bc02sc80i00" Driver Info #0: Driver Status: hostap_pci is active Driver Activation Cmd: "modprobe hostap_pci" Driver Info #1: Driver Status: orinoco_pci is not active Driver Activation Cmd: "modprobe orinoco_pci" Driver Info #2: Driver Status: prism2_pci is not active Driver Activation Cmd: "modprobe prism2_pci" Config Status: cfg=no, avail=yes, need=no, active=unknown 44: USB 00.0: 0291 USB Host-to-Host link [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_5e3_502_noserial_if0 Unique ID: wn1q.O_1aoNxqb1B Parent ID: 2XnU.NsNrnmnifN0 SysFS ID: /devices/pci0000:00/0000:00:11.3/usb5/5-2/5-2:1.0 SysFS BusID: 5-2:1.0 Hardware Class: network Model: "Genesys Logic GL620USB GeneLink USB-USB Bridge" Hotplug: USB Vendor: usb 0x05e3 "Genesys Logic, Inc." Device: usb 0x0502 "GL620USB GeneLink USB-USB Bridge" Revision: "1.80" Driver: "gl620a" Driver Modules: "gl620a" Device File: usb0 Speed: 12 Mbps HW Address: 16:9a:ad:f6:02:ce Link detected: yes Module Alias: "usb:v05E3p0502d0180dc00dsc00dp00icFFisc00ip00" Driver Info #0: Driver Status: usbnet is active Driver Activation Cmd: "modprobe usbnet" Driver Info #1: Driver Status: gl620a is active Driver Activation Cmd: "modprobe gl620a" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #41 (Hub) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.