https://bugzilla.novell.com/show_bug.cgi?id=181598 ------- Comment #11 from vguastal@tiscalinet.it 2007-05-08 09:54 MST ------- I used new bt878.ko attached, this is the result: mi-04:/home/lavoro # dmesg | grep bt bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 201, latency: 32, mmio: 0xd4000000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: Pinnacle PCTV Studio Pro [card=52,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init] i2c-algo-bit.o: bt878 #0 [sw] passed test. bttv0: i2c: checking for MSP34xx @ 0x80... found bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes bttv0: using tuner=33 bttv0: i2c: checking for MSP34xx @ 0x80... found msp3400 2-0040: MSP3410G-B11 found @ 0x80 (bt878 #0 [sw]) bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tuner 2-004b: chip found @ 0x96 (bt878 #0 [sw]) tuner 2-0060: chip found @ 0xc0 (bt878 #0 [sw]) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). bt878_probe: card id=[0x1211bd],[ Pinnacle PCTV Pro ] has DVB functions. bt878(0): Bt878 (rev 17) at 01:07.1, irq: 201, latency: 32, memory: 0xd4001000 mi-04:/home/lavoro # as you can see there are no errors this time, but using kradio I get no sound from any frequency. TV is working good. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.