https://bugzilla.novell.com/show_bug.cgi?id=218975 Summary: USB printer not not found Product: SUSE Linux 10.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Printing AssignedTo: jsmeix@novell.com ReportedBy: gregread@adam.com.au QAContact: jsmeix@novell.com I am trying to get a canon LBP1120 printer to work on AMD64 3200+ system running opensuse 10.1. I have been trying for a couple of weeks now and have the canon rpms loaded and the latest cups update and all the files have the appropriate permissions. Everything looks fine (YAST sees and accepts all settings) but there is no output from the printer, the cups error message at the end of the process says no device found. Below are extracts of dmesg, lsmod, lpstat-t, cups error log extract and the last couple of lines of dmesg after sending a job to the printer. My usb keyboard and scanner work fine I hope you can help Greg dmesg extract Bootdata ok (command line is root=/dev/VolGroup00/LogVol00 vga=0x31a resume=/dev/VolGroup00/LogVol01 splash=silent) Linux version 2.6.16.21-0.25-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Tue Sep 19 07:26:15 UTC 2006 EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). usbcore: registered new driver usbfs usbcore: registered new driver hub ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 GSI 18 sharing vector 0xE1 and IRQ 18 ACPI: PCI Interrupt 0000:01:0e.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 225 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[225] MMIO=[f5004000-f50047ff] Max Packet=[2048] IR/IT contexts=[4/8] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 GSI 19 sharing vector 0xE9 and IRQ 19 ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 233 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) PCI: Setting latency timer of device 0000:00:0b.1 to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:0b.1 ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: irq 233, io mem 0xf5104000 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.16.21-0.25-default ehci_hcd usb usb1: SerialNumber: 0000:00:0b.1 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 GSI 20 sharing vector 0x32 and IRQ 20 ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 50, io mem 0xf5108000 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.16.21-0.25-default ohci_hcd usb usb2: SerialNumber: 0000:00:0b.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:14.0 to 64 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0016e60000b21cf5] usb 2-2: new full speed USB device using ohci_hcd and address 2 eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:14.0 Floppy drive(s): fd0 is 1.44M ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:10.1 to 64 FDC 0 is a post-1991 82077 hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:2097: autoconfig: line_outs=4 (0x14/0x17/0x16/0x15/0x0) ALSA sound/pci/hda/hda_codec.c:2101: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:2103: hp=0x1b, dig_out=0x1e, din_in=0x1f ALSA sound/pci/hda/hda_codec.c:2111: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x0 loop: loaded (max 8 devices) kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. AppArmor: AppArmor (version 2.0-19.43r6320) initialized audit(1162864196.808:2): AppArmor (version 2.0-19.43r6320) initialized usb 2-2: new device found, idVendor=03f0, idProduct=0601 usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: HP ScanJet 6300C usb 2-2: Manufacturer: Hewlett-Packard usb 2-2: SerialNumber: SG993172TKPE usb 2-2: configuration #1 chosen from 1 choice usb 2-3: new full speed USB device using ohci_hcd and address 3 usb 2-3: new device found, idVendor=04a9, idProduct=262b usb 2-3: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-3: Product: Canon CAPT USB Printer usb 2-3: Manufacturer: Canon usb 2-3: SerialNumber: 01460NZv usb 2-3: configuration #1 chosen from 1 choice usb 2-4: new low speed USB device using ohci_hcd and address 4 usb 2-4: new device found, idVendor=045e, idProduct=00db usb 2-4: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-4: Product: Natural Ergonomic Keyboard 4000 usb 2-4: Manufacturer: Microsoft usb 2-4: configuration #1 chosen from 1 choice drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04A9 pid 0x262B usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver usbcore: registered new driver hiddev input: Microsoft Natural Ergonomic Keyboard 4000 as /class/input/input3 input: USB HID v1.11 Keyboard [Microsoft Natural Ergonomic Keyboard 4000] on usb-0000:00:0b.0-4 input: Microsoft Natural Ergonomic Keyboard 4000 as /class/input/input4 input: USB HID v1.11 Device [Microsoft Natural Ergonomic Keyboard 4000] on usb-0000:00:0b.0-4 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Adding 1933304k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1933304k NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (3839 buckets, 30712 max) - 296 bytes per conntrack ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] NET: Registered protocol family 17 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2) powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 (1350 mV) powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa (1300 mV) powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc (1250 mV) powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) cpu_init done, current fid 0xe, vid 0x8 eth0: no IPv6 routers present bootsplash: status on console 0 changed to on SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=110 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=110 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=110 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 Lsmod Module Size Used by xt_pkttype 2304 3 ipt_LOG 6656 8 xt_limit 2944 8 cpufreq_ondemand 7480 1 cpufreq_userspace 4500 0 cpufreq_powersave 2176 0 powernow_k8 10384 0 freq_table 5128 1 powernow_k8 snd_pcm_oss 49024 0 snd_mixer_oss 17920 1 snd_pcm_oss snd_seq 55456 0 snd_seq_device 9360 1 snd_seq edd 10504 0 af_packet 22156 2 button 7968 0 battery 11016 0 ac 5896 0 ip6t_REJECT 6016 3 xt_tcpudp 3712 3 ipt_REJECT 6016 3 xt_state 2560 12 iptable_mangle 3328 0 iptable_nat 8964 0 ip_nat 18860 1 iptable_nat iptable_filter 3456 1 ip6table_mangle 2816 0 ip_conntrack 57228 3 xt_state,iptable_nat,ip_nat nfnetlink 7112 2 ip_nat,ip_conntrack ip_tables 12368 3 iptable_mangle,iptable_nat,iptable_filter ip6table_filter 3328 1 ip6_tables 13904 2 ip6table_mangle,ip6table_filter x_tables 13960 10 xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,xt_tcpudp,ipt_REJECT,xt_state,iptable_nat,ip_tables,ip6_tables ipv6 252992 15 ip6t_REJECT usbhid 43296 0 usblp 14464 0 apparmor 55076 0 aamatch_pcre 14464 1 apparmor loop 16144 0 snd_hda_intel 19228 1 floppy 64968 0 snd_hda_codec 174848 1 snd_hda_intel forcedeth 23684 0 snd_pcm 97036 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec snd_timer 24968 2 snd_seq,snd_pcm snd 64680 10 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer soundcore 10656 1 snd snd_page_alloc 10640 2 snd_hda_intel,snd_pcm ohci_hcd 19460 0 ehci_hcd 30216 0 ide_cd 40224 0 cdrom 36008 1 ide_cd ohci1394 32584 0 ieee1394 101112 1 ohci1394 usbcore 129576 5 usbhid,usblp,ohci_hcd,ehci_hcd parport_pc 39656 1 lp 13064 0 parport 38924 2 parport_pc,lp ext3 131344 4 jbd 62912 1 ext3 dm_snapshot 15416 0 dm_mod 59592 10 dm_snapshot fan 5640 0 thermal 15888 0 processor 25948 2 powernow_k8,thermal sg 35112 0 sata_nv 10628 2 libata 74008 1 sata_nv amd74xx 15024 0 [permanent] sd_mod 17688 3 scsi_mod 145200 3 sg,libata,sd_mod ide_disk 16384 0 ide_core 144612 3 ide_cd,amd74xx,ide_disk Lpstat -t system default destination: lasershotlbp1120 device for lasershotlbp1120: usb://Canon/LASER%20SHOT%20LBP-1120 lasershotlbp1120 accepting requests since Mon Nov 6 19:58:39 2006 printer lasershotlbp1120 is idle. enabled since Mon Nov 6 19:58:39 2006 lasershotlbp1120-3 greg 702464 Mon Nov 6 18:58:16 2006 cups extract D [06/Nov/2006:22:03:38 +1030] banner_page = 0 D [06/Nov/2006:22:03:38 +1030] [Job 7] argv[0]="lasershotlbp1120" D [06/Nov/2006:22:03:38 +1030] [Job 7] argv[1]="7" D [06/Nov/2006:22:03:38 +1030] [Job 7] argv[2]="greg" D [06/Nov/2006:22:03:38 +1030] [Job 7] argv[3]="Error Page" D [06/Nov/2006:22:03:38 +1030] [Job 7] argv[4]="1" D [06/Nov/2006:22:03:38 +1030] [Job 7] argv[5]="media=Letter job-uuid=urn:uuid:f7bd0f5f-82ab-3173-5062-d43ba0827bff" D [06/Nov/2006:22:03:38 +1030] [Job 7] argv[6]="/var/spool/cups/d00007-001" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[0]="CUPS_CACHEDIR=/var/cache/cups" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[1]="CUPS_DATADIR=/usr/share/cups" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[2]="CUPS_DOCROOT=/usr/share/doc/cups" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[4]="CUPS_REQUESTROOT=/var/spool/cups" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[5]="CUPS_SERVERBIN=/usr/lib/cups" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[6]="CUPS_SERVERROOT=/etc/cups" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[7]="CUPS_STATEDIR=/var/run/cups" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[8]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[9]="SERVER_ADMIN=root@linux-greg.site" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[10]="SOFTWARE=CUPS/1.3svn" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[11]="TMPDIR=/var/spool/cups/tmp" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[12]="TZ=Australia/South" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[13]="USER=root" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[14]="CUPS_SERVER=localhost" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[15]="CUPS_ENCRYPTION=IfRequested" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[16]="IPP_PORT=631" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[17]="CHARSET=utf-8" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[18]="LANG=en_US" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[19]="PPD=/etc/cups/ppd/lasershotlbp1120.ppd" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[20]="RIP_MAX_CACHE=8m" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[21]="CONTENT_TYPE=application/postscript" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[22]="DEVICE_URI=usb://Canon/LASER%20SHOT%20LBP-1120" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[23]="PRINTER=lasershotlbp1120" D [06/Nov/2006:22:03:38 +1030] [Job 7] envp[24]="FINAL_CONTENT_TYPE=printer/lasershotlbp1120" I [06/Nov/2006:22:03:38 +1030] Started filter /usr/lib/cups/filter/pstops (PID 4448) for job 7. I [06/Nov/2006:22:03:38 +1030] Started filter /usr/lib/cups/filter/pstocapt (PID 4449) for job 7. I [06/Nov/2006:22:03:38 +1030] Started backend /usr/lib/cups/backend/usb (PID 4450) for job 7. D [06/Nov/2006:22:03:38 +1030] Discarding unused job-state event... I [06/Nov/2006:22:03:38 +1030] Job 4 was canceled by "root". D [06/Nov/2006:22:03:38 +1030] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok) D [06/Nov/2006:22:03:38 +1030] [Job 7] Page = 612x792; 14,14 to 598,778 D [06/Nov/2006:22:03:38 +1030] [Job 7] slow_collate=0, slow_duplex=0, slow_order=0 D [06/Nov/2006:22:03:38 +1030] [Job 7] Before copy_comments - %!PS-Adobe-3.0 D [06/Nov/2006:22:03:38 +1030] [Job 7] %!PS-Adobe-3.0 D [06/Nov/2006:22:03:38 +1030] [Job 7] %%BoundingBox: 0 0 612 792 D [06/Nov/2006:22:03:38 +1030] [Job 7] %%HiResBoundingBox: 0 0 612 792 D [06/Nov/2006:22:03:38 +1030] [Job 7] %%Creator: Mozilla PostScript module (rv:1.8.0.7/2006091100) D [06/Nov/2006:22:03:38 +1030] [Job 7] %%DocumentData: Clean8Bit D [06/Nov/2006:22:03:38 +1030] [Job 7] %%DocumentPaperSizes: Letter D [06/Nov/2006:22:03:38 +1030] [Job 7] %%Orientation: Portrait D [06/Nov/2006:22:03:38 +1030] [Job 7] %%Pages: 1 D [06/Nov/2006:22:03:38 +1030] [Job 7] %%PageOrder: Ascend D [06/Nov/2006:22:03:38 +1030] [Job 7] %%EndComments D [06/Nov/2006:22:03:38 +1030] [Job 7] Before copy_prolog - % MozillaCharsetName: iso-8859-1 D [06/Nov/2006:22:03:38 +1030] [Job 7] Before copy_setup - %%BeginResource: font Albany_AMT.Bold.0.0.Set0 D [06/Nov/2006:22:03:38 +1030] [Job 7] Before page loop - %%Page: 1 1 D [06/Nov/2006:22:03:38 +1030] [Job 7] Copying page 1... D [06/Nov/2006:22:03:38 +1030] [Job 7] pagew = 583.7, pagel = 763.2 D [06/Nov/2006:22:03:38 +1030] [Job 7] bboxw = 612, bboxl = 792 D [06/Nov/2006:22:03:38 +1030] [Job 7] PageLeft = 14.2, PageRight = 597.8 D [06/Nov/2006:22:03:38 +1030] [Job 7] PageTop = 777.6, PageBottom = 14.4 D [06/Nov/2006:22:03:38 +1030] [Job 7] PageWidth = 612.0, PageLength = 792.0 D [06/Nov/2006:22:03:38 +1030] [Job 7] pstocapt start. D [06/Nov/2006:22:03:38 +1030] Discarding unused printer-state-changed event... D [06/Nov/2006:22:03:38 +1030] cupsdCloseClient: 7 D [06/Nov/2006:22:03:38 +1030] cupsdCloseClient: 10 D [06/Nov/2006:22:03:38 +1030] PID 3709 (/usr/lib/cups/filter/pstops) exited with no errors. E [06/Nov/2006:22:03:38 +1030] PID 3710 (/usr/lib/cups/filter/pstocapt) stopped with status 1! D [06/Nov/2006:22:03:38 +1030] [Job 7] Printer using device file "/dev/usblp0"... D [06/Nov/2006:22:03:38 +1030] Discarding unused printer-state-changed event... D [06/Nov/2006:22:03:38 +1030] [Job 7] backendRunLoop(print_fd=0, device_fd=4, use_bc=0) D [06/Nov/2006:22:03:38 +1030] [Job 7] Wrote 1 pages... D [06/Nov/2006:22:03:38 +1030] PID 4448 (/usr/lib/cups/filter/pstops) exited with no errors. D [06/Nov/2006:22:03:38 +1030] [Job 7] Read 166 bytes of print data... D [06/Nov/2006:22:03:38 +1030] [Job 7] Wrote 166 bytes of print data... D [06/Nov/2006:22:03:38 +1030] [Job 7] Read 84 bytes of print data... D [06/Nov/2006:22:03:38 +1030] [Job 7] Wrote 84 bytes of print data... D [06/Nov/2006:22:03:38 +1030] [Job 7] Read 76 bytes of print data... D [06/Nov/2006:22:03:38 +1030] [Job 7] Wrote 76 bytes of print data... D [06/Nov/2006:22:03:38 +1030] [Job 7] Read 3129 bytes of print data... E [06/Nov/2006:22:03:38 +1030] [Job 7] Unable to write print data: No such device D [06/Nov/2006:22:03:38 +1030] Discarding unused printer-state-changed event... dmesg after trying to print TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -110 drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -110 drivers/usb/class/usblp.c: usblp0: error -110 reading printer status drivers/usb/class/usblp.c: usblp0: error -110 reading printer status drivers/usb/class/usblp.c: usblp0: error -110 reading printer status drivers/usb/class/usblp.c: usblp0: error -110 reading printer status drivers/usb/class/usblp.c: usblp0: error -110 reading printer status drivers/usb/class/usblp.c: usblp0: error -110 reading printer status drivers/usb/class/usblp.c: usblp0: error -110 reading printer status drivers/usb/class/usblp.c: usblp0: error -110 reading printer status drivers/usb/class/usblp.c: usblp0: error -110 reading printer status drivers/usb/class/usblp.c: usblp0: error -110 reading printer status usb 2-3: USB disconnect, address 3 drivers/usb/class/usblp.c: usblp0: removed usb 2-3: new full speed USB device using ohci_hcd and address 5 usb 2-3: new device found, idVendor=04a9, idProduct=262b usb 2-3: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-3: Product: Canon CAPT USB Printer usb 2-3: Manufacturer: Canon usb 2-3: SerialNumber: 01460NZv usb 2-3: configuration #1 chosen from 1 choice drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04A9 pid 0x262B -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.