Hi,
which entries in autoyast.xml do I need to configure a raid1 device with 2 devices, where one of these should be (at the beginning / installation time) a missing device. Sometimes, after the installation, I want to add a second HD and make a "mdadm -a".
=> so the functionality of "mdadm -C /dev/md0 -l raid1 -n 2 /dev/hda1 missing" and "mdadm -C /dev/md1 -l raid1 -n 2 /dev/hda2 missing" in autoyast is required
Because, I didn't find anything about missing devices in the autoyast documentation, I tried to only change "/dev/hdb" to "missing", but that's not working... (see below)
:
:
:
<partitioning config:type="list">
<drive>
<device>/dev/hda</device>
<initialize config:type="boolean">true</initialize>
<partitions config:type="list">
<partition>
<format config:type="boolean">false</format>
253
primary
/dev/md0
<size>256M</size>
</partition>
<partition>
<format config:type="boolean">false</format>
253
primary
/dev/md1
<size>max</size>
</partition>
</partitions>
<use>all</use>
</drive>
<drive>
<device>missing</device>
<initialize config:type="boolean">true</initialize>
<partitions config:type="list">
<partition>
<format config:type="boolean">false</format>
253
primary
/dev/md0
<size>256M</size>
</partition>
<partition>
<format config:type="boolean">false</format>
253
primary
/dev/md1
<size>max</size>
</partition>
</partitions>
<use>all</use>
</drive>
</partitioning>
<raid config:type="list">
/dev/md0
left-asymmetric
true
raid1
131
4
<mount>/boot</mount>
<format config:type="boolean">true</format>
<filesystem config:type="symbol">xfs</filesystem>
/dev/md1
vg00
left-asymmetric
true
raid1
142
4
</raid>
:
:
:
Thanks in advance.
--
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
