Hello,
I am getting the following error during the partition phase of autoyast.
LVM error
lvremove -f -A n /dev/vg00/home
/dev/sda1: open failed: No such device or address
Here is my xml file.
<?xml version="1.0"?>
<!DOCTYPE profile SYSTEM "/usr/share/autoinstall/dtd/profile.dtd">
<profile xmlns="http://www.suse.com/1.0/yast2ns"
xmlns:config="http://www.suse.com/1.0/configns">
<configure>
<networking>
AUTO
<dns>
false
false
<domain>mmm.com</domain>
<hostname>servername</hostname>
<nameservers config:type="list">
<nameserver>0.0.0.0</nameserver>
<nameserver>0.0.0.0</nameserver>
</nameservers>
<searchlist config:type="list">
<search>mmm.com</search>
</searchlist>
</dns>
<interfaces config:type="list">
<interface>
<bootproto>static</bootproto>
<broadcast>0.0.0.0</broadcast>
<device>eth-id-00:14:22:0e:7b:d0</device>
<ipaddr>0.0.0.0</ipaddr>
<netmask>255.255.255.0</netmask>
<network>0.0.0.0</network>
<startmode>onboot</startmode>
</interface>
</interfaces>
<modules config:type="list">
<device>bus-pci-0000:06:07.0</device>
<module>e1000</module>
<options>Speed=100 Duplex=2</options>
</modules>
<routing>
false
<routes config:type="list">
<route>
<destination>default</destination>
<device>-</device>
<gateway>0.0.0.0</gateway>
<netmask>-</netmask>
</route>
</routes>
</routing>
</networking>
</configure>
<install>
<general>
<clock>
<hwclock>UTC</hwclock>
<timezone>US/Central</timezone>
</clock>
<keyboard>
<keymap>english-us</keymap>
</keyboard>
<language>en_US</language>
<mode>
<confirm config:type="boolean">false</confirm>
</mode>
<mouse>
<id>22_exps2</id>
</mouse>
</general>
<partitioning config:type="list">
<drive>
<device>/dev/sda</device>
<initialize config:type="boolean">true</initialize>
<partitions config:type="list">
<partition>
<filesystem config:type="symbol">ext3</filesystem>
<create config:type="boolean">true</create>
<format config:type="boolean">true</format>
false
primary
<mount>/boot</mount>
<size>1GB</size>
</partition>
<partition>
<filesystem config:type="symbol">swap</filesystem>
<create config:type="boolean">true</create>
<format config:type="boolean">true</format>
false
primary
<mount>swap</mount>
<size>2GB</size>
</partition>
<partition>
<create config:type="boolean">true</create>
vg00
primary
<size>max</size>
</partition>
</partitions>
<use>all</use>
</drive>
<drive>
<device>/dev/sdb</device>
<initialize config:type="boolean">true</initialize>
<partitions config:type="list"/>
</drive>
<drive>
<device>/dev/vg00</device>
true
<create config:type="boolean">true</create>
<partitions config:type="list">
<partition>
<filesystem config:type="symbol">ext3</filesystem>
home
<mount>/home</mount>
<size>2000mb</size>
</partition>
<partition>
<filesystem config:type="symbol">ext3</filesystem>
opt
<mount>/opt</mount>
<size>4000mb</size>
</partition>
<partition>
<filesystem config:type="symbol">ext3</filesystem>
root
<mount>/</mount>
<size>6000mb</size>
</partition>
<partition>
<filesystem config:type="symbol">ext3</filesystem>
tmp
<mount>/tmp</mount>
<size>2000mb</size>
</partition>
<partition>
<filesystem config:type="symbol">ext3</filesystem>
usr
<mount>/usr</mount>
<size>4000mb</size>
</partition>
<partition>
<filesystem config:type="symbol">ext3</filesystem>
var
<mount>/var</mount>
<size>4000mb</size>
</partition>
</partitions>
<pesize>4M</pesize>
<use>all</use>
</drive>
</partitioning>
<report>
<errors>
<log config:type="boolean">true</log>
<show config:type="boolean">true</show>
<timeout config:type="integer">0</timeout>
</errors>
<messages>
<log config:type="boolean">true</log>
<show config:type="boolean">true</show>
<timeout config:type="integer">0</timeout>
</messages>
<warnings>
<log config:type="boolean">true</log>
<show config:type="boolean">true</show>
<timeout config:type="integer">0</timeout>
</warnings>
<log config:type="boolean">true</log>
<show config:type="boolean">true</show>
<timeout config:type="integer">0</timeout>
</report>
<software>
<addons config:type="list">
<addon>Linux-Tools</addon>
<addon>Basis-Sound</addon>
<addon>X11</addon>
<addon>Base-System</addon>
<addon>Kde-Desktop</addon>
<addon>YaST2</addon>
<addon>auth</addon>
<addon>Print-Server</addon>
<addon>SuSE-Documentation</addon>
</addons>
<base>default</base>
<packages config:type="list">
<package>clamav</package>
<package>gmp</package>
<package>ltrace</package>
<package>sharutils</package>
</packages>
</software>
</install>
</profile>
Any ideas or help would be greatly apprcieated!
David Bellis