On Dienstag, 5. September 2017 08:53:02 CEST Freek de Kruijf wrote:
Op maandag 4 september 2017 14:28:24 CEST schreef u:
On 04.09.17 11:49, Freek de Kruijf wrote:
I used the latest JeOS image 2017.05.23-Build1.1 for the RPi1 (armv6l) on a SD card and booted the system, which went OK.
After that I did a "zypper dup --no-recommends" on that system which, at the end, shows the following message:
Output of grub2-arm-uboot-2.02-6.1.armv6hl.rpm %posttrans script: update-bootloader: 2017-09-04 11:31:09 <3> update-bootloader-1244
run_command.274: '/usr/lib/bootloader/grub2-efi/install' failed with exit code>
1, output: <<<<<<<<<<<<<<<< target = arm-efi ls: cannot access '/sys/firmware/efi/efivars': No such file or directory + /usr/sbin/grub2-install --target=arm-efi --no-nvram --removable Installing for arm-efi platform.
Can you try to run this command on its own? If it still fails, run it with strace -f and upload the output somewhere (or look at it and search for failures)?
Thanks!
Alex
The RPi1 is not EFI system, so I wonder why the target should be arm-efi.
Ass soon as it runs U-Boot, it is ... Kind regards, Stefan -- Stefan Brüns / Bergstraße 21 / 52062 Aachen home: +49 241 53809034 mobile: +49 151 50412019 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org