Mailinglist Archive: opensuse-arm (170 mails)

< Previous Next >
Re: [opensuse-arm] u-boot+EFI: how to debug grub2?

On 13.03.16 16:03, Matwey V. Kornilov wrote:

[ 1.700159] devtmpfs: error mounting -2
[ 1.706736] Freeing unused kernel memory: 1320K (c1034000 - c117e000)
[ 1.713459] Kernel panic - not syncing: No working init found. Try
passing init= option to kernel. See Linux Documentation/init.txt for
[ 1.726667] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
4.5.0-rc7-1.g924f2b7-default #1
[ 1.734535] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 1.740722] [<c0227b90>] (unwind_backtrace) from [<c0220c50>]
[ 1.748530] [<c0220c50>] (show_stack) from [<c0586f3c>]
[ 1.755816] [<c0586f3c>] (dump_stack) from [<c037f440>] (panic+0xec/0x270)
[ 1.762745] [<c037f440>] (panic) from [<c0b20a90>]
[ 1.770205] Rebooting in 90 seconds..

However, md.b 0x812bfc30 shows zeroes. It would be great to learn how
to properly use it.

Maybe it's the wrong address after all. Try to run "nm" on the vmlinux
binary (should be gzipped in /boot) and check for all occurences of
log_buf (and __log_buf). 0xc0000000 is the "start of physical memory" in
Linux. Since your SoC starts ram at 0x80000000, all you need to do is
replace the c with an 8.

To unsubscribe, e-mail: opensuse-arm+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse-arm+owner@xxxxxxxxxxxx

< Previous Next >
Follow Ups