I have a RPi 1B with a Wi-Fi USB interface using the latest image for this system. The network is configured with a fixed IP address and obviously default gateway and DNS are configured as well. IPv6 is disabled. When I start the system, or later when things went wrong restart the network, I get a proper connection and can run "zypper up" with no problem. I access that system from my desktop via ssh. When I use the command "ip -d ne" I get the following: 192.168.178.1 dev wlan0 lladdr 9c:c7:a6:0a:1f:48 REACHABLE 192.168.178.6 dev wlan0 lladdr e0:cb:4e:cd:d7:b6 REACHABLE The first line shows the default gateway/router/Wi-Fi AP However after some time I get the following: 192.168.178.1 dev wlan0 lladdr 9c:c7:a6:0a:1f:48 STALE 192.168.178.6 dev wlan0 lladdr e0:cb:4e:cd:d7:b6 REACHABLE So I still have a connection from my desktop via the Wi-Fi AP to the RPi. When I try a ping to the default gateway I do not get a response. I used tcpdump on the RPi to catch the traffic. When doing the ping I see ARP requests for the MAC address of the IP address of the default gateway. However there is no response from the router. Puzzled!! -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org