Mailinglist Archive: opensuse-arm (101 mails)

< Previous Next >
Re: [opensuse-arm] Re: kiwi - FAT support problem
  • From: Guillaume Gardet <guillaume.gardet@xxxxxxx>
  • Date: Fri, 13 Dec 2013 15:35:52 +0100
  • Message-id: <52AB1B48.8010308@free.fr>

Le 13/12/2013 15:26, Guillaume Gardet a écrit :
Le 13/12/2013 15:10, Marcus Schäfer a écrit :
Hi,

No, what I mean is if I resize manually the FAT partition with YaST
partitionner, then it does boot. So the partition table may be wrong or
there might be some overlap or something.
I'm running out of ideas the damn thing does not boot :) I even
dd'ed the first 512byte from the _working_ image from Bernhard
onto the sd card, then I created the fat fs then I copied all
files from Bernhards working image over to my fat filesystem
and the thing still does not boot and does not give any error
message... what the heck is going on there ? do we need an MLO
for raspberry ? do we need to have special fat options for the
filesystem ? Thanks for any hint
No need for MLO or SPL or such things for Raspberry Pi. Just a FAT32
partition.

Just take the OBS image and resize it from 200 MB to 190 MB using YaST
partitionner. It will boot.
Then if you want to size it up, you cannot reach 200 MB but only 196 MB. So,
the problem seems to be in the partition size.
Try it.

One last thing. Now, DTB files should be located in /boot/dtb/ folder
whereas, previously, we used /boot/. So we should update kiwi accordingly,
otherwise DTB files are not in BOOT partition. Do you want I send you a
patch for that one or could you do it?
Would be great if you can come up with a patch
Will prepare it.

It is in attachment.
Please check if it is ok to get /boot/dtb/ in BOOT partition.


Guillaume



Guillaume

Thanks much

Regards,
Marcus

From 93a97a783ce5bb2ef087d42ee7a930f7e2737e86 Mon Sep 17 00:00:00 2001
From: Guillaume GARDET <guillaume.gardet@xxxxxxxxx>
Date: Fri, 13 Dec 2013 15:33:22 +0100
Subject: [PATCH] Add support to /boot/dtb/ since DTB files are now in this
folder

---
modules/KIWIBoot.pm | 1 +
modules/KIWIConfig.sh | 1 +
2 files changed, 2 insertions(+)

diff --git a/modules/KIWIBoot.pm b/modules/KIWIBoot.pm
index d79726b..2de7920 100644
--- a/modules/KIWIBoot.pm
+++ b/modules/KIWIBoot.pm
@@ -5362,6 +5362,7 @@ sub copyBootCode {
KIWIQX::qxx ("mv $dest/boot/*.img $dest &>/dev/null");
KIWIQX::qxx ("mv $dest/boot/*.imx $dest &>/dev/null");
KIWIQX::qxx ("mv $dest/boot/*.dtb $dest &>/dev/null");
+ KIWIQX::qxx ("mv $dest/boot/dtb/ $dest &>/dev/null");
KIWIQX::qxx ("mv $dest/boot/*.elf $dest &>/dev/null");
if (-f "$dest/boot/MLO") {
$status = KIWIQX::qxx ("mv $dest/boot/MLO $dest");
diff --git a/modules/KIWIConfig.sh b/modules/KIWIConfig.sh
index 15d7d63..c02c088 100644
--- a/modules/KIWIConfig.sh
+++ b/modules/KIWIConfig.sh
@@ -1271,6 +1271,7 @@ function suseGFXBoot {
mv /boot/*.img /image/loader &>/dev/null
mv /boot/*.imx /image/loader &>/dev/null
mv /boot/*.dtb /image/loader &>/dev/null
+ mv /boot/dtb/ /image/loader &>/dev/null
mv /boot/*.elf /image/loader &>/dev/null
else
# boot loader binaries
--
1.7.10.4

< Previous Next >