Re: [opensuse-arm] Issues with Arndale

On 14.05.2013, at 19:13, Andrew Wafaa wrote:

Hi All,

I've been contacted by a company that is trying to use openSUSE on the Arndale and have encountered an issue. It looks like for some reason the single zImage isn't supported.

I'm unavailable atm to look further as I'm at a conference. If someone could have a look and advise I will happily forward on fixes etc.

Thanks,

Andy

====== I'm trying to use the latest opensuse image for the arndale board: http://download.opensuse.org/repositories/devel:/ARM:/12.3:/Contrib:/Arndale...

But I'm unable to go after U-boot: May 14 15:41:27.333982 Loading file "uEnv.txt" from mmc device 0:1 May 14 15:41:27.348625 ** File not found uEnv.txt May 14 15:41:27.353010 ext2load - load binary file from a Ext2 filesystem May 14 15:41:27.353029 May 14 15:41:27.353632 Usage: May 14 15:41:27.359233 ext2load <interface> [addr] [filename] [bytes] May 14 15:41:27.364093 - load binary file 'filename' from 'dev' on 'interface' May 14 15:41:27.368299 to address 'addr' from ext2 filesystem May 14 15:41:27.371872 Loading file "boot.scr" from mmc device 0:1 May 14 15:41:27.383901 1646 bytes read May 14 15:41:27.387415 Running bootscript from mmc0 ... May 14 15:41:27.390125 ## Executing script at 40007000 May 14 15:41:27.396179 kerneladdr=0x40007000 May 14 15:41:27.398516 ramdiskaddr=0x4f000000 May 14 15:41:27.404527 mmc0 is current device May 14 15:41:27.409725 Loading file "boot/linux.vmx" from mmc device 0:1 May 14 15:41:28.092472 3743856 bytes read May 14 15:41:28.096727 Loading file "boot/initrd.uboot" from mmc device 0:1 May 14 15:41:33.938595 33233176 bytes read May 14 15:41:33.943601 Loading file "exynos5250-arndale.dtb" from mmc device 0:1 May 14 15:41:33.964079 16936 bytes read May 14 15:41:33.967523 Unknown command 'bootz' - try 'help'

If I replace bootz by bootm with: setenv boottype bootm

I'm able to boot OpenSuse.

Oops, that one was my fault. I configured the bootloader configuration to use bootz while the image was actually a uImage. I changed the configuration now, so as soon as the image finished building the Arndale image should work again. Sorry for the fuss. Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org