Hello again! I run the image LimeJeOS-openSUSE-Factory-ARM-panda.armv7l-1.12.1-Build10.1.raw from http://download.opensuse.org/repositories/openSUSE:/Factory:/ARM/images/ on the new Pandaboard ES. After zypper ref && zypper up the following error occures on boot: ************************************ USB EHCI 1.00 scanning bus for devices... The request port(2) is not configured The request port(2) is not configured 4 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found scanning bus for ethernet devices... 1 Ethernet Device(s) found Waiting for Ethernet connection... done. BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 42 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.1.116 missing environment variable: pxeuuid missing environment variable: ethaddr missing environment variable: bootfile Retrieving file: pxelinux.cfg/01-2e-60-1a-38-4e-01 Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.1; our IP address is 192.168.1.116 Filename 'pxelinux.cfg/01-2e-60-1a-38-4e-01'. Load address: 0x86000000 Loading: EHCI timed out on TD - token=0x88008d80 T EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x88008d80 T EHCI timed out on TD - token=0x88008d80 T EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x88008d80 T EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x88008d80 T EHCI timed out on TD - token=0x88008d80 T EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x88008d80 Retry count exceeded; starting again Waiting for Ethernet connection... done. EHCI timed out on TD - token=0x88008d80 Using sms0 device TFTP from server 192.168.1.1; our IP address is 192.168.1.116 Filename 'pxelinux.cfg/01-2e-60-1a-38-4e-01'. Load address: 0x86000000 Loading: EHCI timed out on TD - token=0x88008d80 T EHCI timed out on TD - token=0x88008d80 T EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x88008d80 T EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x88008d80 T EHCI timed out on TD - token=0x88008d80 T EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x88008d80 T EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x88008d80 Retry count exceeded; starting again ... ************************************ The boot process is in an endless loop now. Is this a factory problem or is "zypper up" the wrong way? There is also a similar thread for the Beagleboard xM (http://lists.opensuse.org/opensuse-arm/2012-04/msg00006.html). Maybe it's the same issue... Regards, endym -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org