Make sure you use the 1.01 BIOS for this board as the 1.00 will only work cleanly with apic=off. The 1.01 bios will install 9.3 out of the box nicely.
Actually, v.1.01 is buggy. Depending on how many
devices you have, you might , for example, lose SCSI
controller (that's what happened to me). I have SATA
drives. When I unplugged them, only then BIOS reported
SCSI (LSI) controller and prompted to "Ctrl-C" to
enter it's setup. Also an error messages popped up
during boot (see below). When I complained to TYAN
tech support I got this answer:
++++++++++++++++++++++++++++++++++++++++++++
Q? Why do I get this error message (Out of space for
Option ROMs! The Option ROM for the following device-
PCI Mass Storage Controller on Motherboard
Bus:0A, Device:06, Function:00 -was unable to run due
to memory constraints) after I have updated my bios?
A: The Phoenix BIOS Code used in version 1.00 moves
the USB initialization to above 1MB memory. This would
free up more than the standard 128k memory for Option
ROM space. However, a bug was found in this code with
the
nVidiachipset. Initializing memory above 1MB will
cause the USB to not work properly. Current BIOS
versions have moved the USB back down to the legacy
memory location in the memory range of E0000. This
limits option ROM to maximum 128k. Tyan is working
with nVidia & Phoenix to fix the BIOS code
bug. We will provide a BIOS update as soon as we are
able to verify a robust fix. The only current work
arounds are to try using a different video card
with a smaller Video BIOS or Disable MAC Bridge or
SATA Controllers if not used.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
Dima.
--- Matt Hurd
Hmmm, I sent you a mail directly but my email was reported to be blacklisted at your server...
---------- Forwarded message ---------- From: Matt Hurd
Date: 14-Jul-2005 08:40 Subject: Re: [suse-amd64] SuSE 9.3 and Tyan S2895 To: "rrpalma@synopsis.ws" 3. Any other issue I should be aware of?
I have a similar config with half a dozen machines. Make sure you use the 1.01 BIOS for this board as the 1.00 will only work cleanly with apic=off. The 1.01 bios will install 9.3 out of the box nicely. Also if you have 4GB or more RAM be aware of the PCI address remapping as otherwise the default config will be with 1GB less than you expect of available memory.
Hope this helps,
Matt __________ linux noobie
-- Check the List-Unsubscribe header to unsubscribe For additional commands, email: suse-amd64-help@suse.com
____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs