Script 'mail_helper' called by ro Hello packager, This is just FYI. Your package was checked in in distribution "sle12" by autobuild-member: ro. Here comes the log... ---------------------------%<------------------------------ Hi, here is the log from ci_new_pac /mounts/work_src_done/SLE12/yast2-network -> sle12 ## BNC# 861078 : "pre-Alpha3: network not setup" (RESOLVED/FIXED) Changes: -------- --- /work/SRC/SUSE:SLE-12:GA/yast2-network/yast2-network.changes 2014-01-27 12:52:27.000000000 +0100 +++ /mounts/work_src_done/SLE12/yast2-network/yast2-network.changes 2014-01-30 11:42:54.000000000 +0100 @@ -1,0 +2,8 @@ +Thu Jan 30 09:55:29 UTC 2014 - mfilka@suse.com + +- bnc#861078 + - network configuration created during installation is copied to + target +- 3.1.16 + +------------------------------------------------------------------- calling whatdependson for sle12-i586 Packages directly triggered for rebuild: - yast2-network - at least 16 other packages ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/SUSE:SLE-12:GA/yast2-network (Old) and /mounts/work_src_done/SLE12/yast2-network (BS:build ID:31391 MAIL:yast-devel@opensuse.org) (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "yast2-network", Maintainer is "yast-devel@opensuse.org" Old: ---- yast2-network-3.1.15.tar.bz2 New: ---- yast2-network-3.1.16.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-network.spec ++++++ --- /var/tmp/diff_new_pack.FQL490/_old 2014-01-30 15:06:14.000000000 +0100 +++ /var/tmp/diff_new_pack.FQL490/_new 2014-01-30 15:06:14.000000000 +0100 @@ -17,7 +17,7 @@ Name: yast2-network -Version: 3.1.15 +Version: 3.1.16 Release: 0 BuildRoot: %{_tmppath}/%{name}-%{version}-build ++++++ yast2-network-3.1.15.tar.bz2 -> yast2-network-3.1.16.tar.bz2 ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.15/README.md new/yast2-network-3.1.16/README.md --- old/yast2-network-3.1.15/README.md 1970-01-01 01:00:00.000000000 +0100 +++ new/yast2-network-3.1.16/README.md 2014-01-30 11:40:45.000000000 +0100 @@ -0,0 +1,86 @@ +YaST Network Module +====================== + +The YaST2 Network module manages network configuration including device configuration, +DNS, Routing and more + +Features +-------- + + * device configuration via netconfig + * network service selection (netconfig, NetworkManager, wicked) + * routing configuration + * DNS and hostname setup + * remote administration setup + +Some features are SuSE Linux specific. + +[](https://codeclimate.com/github/yast/yast-network) + +Installation +------------ + +To install the latest stable version on openSUSE or SLE, use zypper: + + $ sudo zypper install yast2-network + +Running +------- + +To run the module, use the following command as root: + + $ yast2 lan + +This will start complex dialog with most of features available. +For more options see section on [running YaST](https://en.opensuse.org/SDB:Starting_YaST) +in the YaST documentation. + +Documentation +------------- + +User YaST documentation is available in [general YaST documentation](https://en.opensuse.org/Portal:YaST). + +Developer documentation specific for this module is in the [doc](doc) +directory. + +Development +----------- + +This module is developed as part of YaST. See +[YaST development documentation]( + https://en.opensuse.org/openSUSE:YaST_development) +for information about [YaST architecture]( + https://en.opensuse.org/openSUSE:YaST:_Architecture_Overview), +[development environment]( +https://en.opensuse.org/openSUSE:YaST:_Preparing_the_Development_Environment) +and other development-related topics. + +To get the source code, clone the GitHub repository: + + $ git clone https://github.com/yast/yast-network.git + +Alternatively, you can fork the repository and clone your fork. This is most +useful if you plan to contribute into the project. + +Before doing anything useful with the code, you need to setup a development +environment. Fortunately, this is quite simple: + + $ sudo zypper install yast2-devtools + +To run the module from the source code, use the `run` Rake task: + + $ rake run + +To run the testsuite, use the `test` Rake task: + + $ rake test + +For a complete list of tasks, run `rake -T`. + +Before submitting any change please read our [contribution +guidelines](CONTRIBUTING.md). + +If you have any question, feel free to ask at the [development mailing +list](http://lists.opensuse.org/yast-devel/) or at the +[#yast](https://webchat.freenode.net/?channels=%23yast) IRC channel on freenode. +We'll do our best to provide a timely and accurate answer. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.15/package/yast2-network.changes new/yast2-network-3.1.16/package/yast2-network.changes --- old/yast2-network-3.1.15/package/yast2-network.changes 2014-01-27 11:39:48.000000000 +0100 +++ new/yast2-network-3.1.16/package/yast2-network.changes 2014-01-30 11:40:45.000000000 +0100 @@ -1,4 +1,12 @@ ------------------------------------------------------------------- +Thu Jan 30 09:55:29 UTC 2014 - mfilka@suse.com + +- bnc#861078 + - network configuration created during installation is copied to + target +- 3.1.16 + +------------------------------------------------------------------- Tue Jan 21 10:30:13 UTC 2014 - mfilka@suse.com - bnc#859181 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.15/package/yast2-network.spec new/yast2-network-3.1.16/package/yast2-network.spec --- old/yast2-network-3.1.15/package/yast2-network.spec 2014-01-27 11:39:48.000000000 +0100 +++ new/yast2-network-3.1.16/package/yast2-network.spec 2014-01-30 11:40:45.000000000 +0100 @@ -17,7 +17,7 @@ Name: yast2-network -Version: 3.1.15 +Version: 3.1.16 Release: 0 BuildRoot: %{_tmppath}/%{name}-%{version}-build diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.15/src/clients/save_network.rb new/yast2-network-3.1.16/src/clients/save_network.rb --- old/yast2-network-3.1.15/src/clients/save_network.rb 2014-01-27 11:39:48.000000000 +0100 +++ new/yast2-network-3.1.16/src/clients/save_network.rb 2014-01-30 11:40:45.000000000 +0100 @@ -706,11 +706,9 @@ copy_from = String.Quote(Builtins.sformat("%1%2", sysconfig, file)) Builtins.y2milestone("Copy %1 into %2", copy_from, copy_to) cmd = Builtins.sformat("cp %1 %2", copy_from, copy_to) - Builtins.y2internal( - "cml %1:%2", - cmd, - SCR.Execute(path(".target.bash_output"), cmd) - ) + ret = SCR.Execute(path(".target.bash_output"), cmd) + + Builtins.y2error("cmd: '#{cmd}' failed: #{ret}") if ret["exit"] != 0 end # merge files with default installed by sysconfig @@ -761,13 +759,13 @@ # when root is on nfs/iscsi set startmode=nfsroot #176804 device = NetworkStorage.getDevice(Installation.destdir) - Builtins.y2internal( + Builtins.y2debug( "%1 directory is on %2 device", Installation.destdir, device ) @network_disk = NetworkStorage.isDiskOnNetwork(device) - Builtins.y2internal("Network based device: %1", @network_disk) + Builtins.y2milestone("Network based device: %1", @network_disk) if Arch.s390 @@ -852,18 +850,11 @@ ) ) else - Builtins.y2internal("file %1 exists", net_destfile) + Builtins.y2milestone("Not copying file %1 - it already exists", net_destfile) end - install_inf = ReadInstallInf() - configure_network = false - if install_inf - configure_network = Ops.get_string( - @InstallInf, - "firststage_network", - "0" - ) == "1" - CopyConfiguredNetworkFiles() if configure_network + if ReadInstallInf() + CopyConfiguredNetworkFiles() else Builtins.y2error("Error while reading install.inf!") end @@ -874,26 +865,13 @@ LanUdevAuto.Write if Mode.autoinst + SCR.Execute(path(".target.bash"), "chkconfig network on") - if install_inf - # string hwcfgname = CreateHardwareFile(); - # string ifcfg = sformat("ifcfg-%1", InstallInf["netdevice"]:""); - - if !configure_network - CreateIfcfg() - CreateOtherNetworkFiles() - end - - SCR.Execute(path(".target.bash"), "chkconfig network on") - - # if portmap running - start it after reboot - WFM.Execute( - path(".local.bash"), - "pidofproc rpcbind && touch /var/lib/YaST2/network_install_rpcbind" - ) - else - Builtins.y2error("Error while reading install.inf!") - end + # if portmap running - start it after reboot + WFM.Execute( + path(".local.bash"), + "pidofproc rpcbind && touch /var/lib/YaST2/network_install_rpcbind" + ) nil end continue with "q"... Checked in at Thu Jan 30 15:06:20 CET 2014 by ro Remember to have fun... -- To unsubscribe, e-mail: yast-devel+unsubscribe@opensuse.org To contact the owner, e-mail: yast-devel+owner@opensuse.org