Author: gs Date: Tue Apr 19 13:00:01 2011 New Revision: 63827 URL: http://svn.opensuse.org/viewcvs/yast?rev=63827&view=rev Log: YaSt module fro FCoE configuration Added: trunk/fcoe-client/ trunk/fcoe-client/MAINTAINER trunk/fcoe-client/Makefile.cvs trunk/fcoe-client/RPMNAME trunk/fcoe-client/VERSION trunk/fcoe-client/_cvsignore trunk/fcoe-client/agents/ trunk/fcoe-client/agents/Makefile.am trunk/fcoe-client/agents/_cvsignore trunk/fcoe-client/configure.in.in trunk/fcoe-client/doc/ trunk/fcoe-client/doc/Makefile.am trunk/fcoe-client/doc/_cvsignore trunk/fcoe-client/doc/autodocs/ trunk/fcoe-client/doc/autodocs/Makefile.am trunk/fcoe-client/doc/autodocs/_cvsignore trunk/fcoe-client/package/ trunk/fcoe-client/package/_cvsignore trunk/fcoe-client/package/yast2-fcoe-client.changes trunk/fcoe-client/src/ trunk/fcoe-client/src/FcoeClient.ycp trunk/fcoe-client/src/FcoeClient2.pm trunk/fcoe-client/src/FcoeClient3.py trunk/fcoe-client/src/Makefile.am trunk/fcoe-client/src/_cvsignore trunk/fcoe-client/src/complex.ycp trunk/fcoe-client/src/dialogs.ycp trunk/fcoe-client/src/fcoe-client.desktop trunk/fcoe-client/src/fcoe-client.ycp trunk/fcoe-client/src/fcoe-client_auto.ycp trunk/fcoe-client/src/fcoe-client_proposal.ycp trunk/fcoe-client/src/helps.ycp trunk/fcoe-client/src/wizards.ycp trunk/fcoe-client/testsuite/ trunk/fcoe-client/testsuite/Makefile.am trunk/fcoe-client/testsuite/_cvsignore trunk/fcoe-client/testsuite/tests/ trunk/fcoe-client/testsuite/tests/FcoeClient.err trunk/fcoe-client/testsuite/tests/FcoeClient.out trunk/fcoe-client/testsuite/tests/FcoeClient.ycp trunk/fcoe-client/testsuite/tests/_cvsignore trunk/fcoe-client/yast2-fcoe-client.spec.in Added: trunk/fcoe-client/MAINTAINER URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/MAINTAINER?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/MAINTAINER (added) +++ trunk/fcoe-client/MAINTAINER Tue Apr 19 13:00:01 2011 @@ -0,0 +1 @@ +Gabriele Mohr Added: trunk/fcoe-client/Makefile.cvs URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/Makefile.cvs?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/Makefile.cvs (added) +++ trunk/fcoe-client/Makefile.cvs Tue Apr 19 13:00:01 2011 @@ -0,0 +1,22 @@ +# +# Makefile.cvs +# +PREFIX = /usr + +LIB = $(shell y2tool get-lib) + +configure: all + ./configure --prefix=$(PREFIX) --libdir=$(PREFIX)/$(LIB) + +all: + y2tool y2autoconf + y2tool y2automake + autoreconf --force --install + +install: configure + make + make install + +reconf: all + ./config.status --recheck + ./config.status Added: trunk/fcoe-client/RPMNAME URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/RPMNAME?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/RPMNAME (added) +++ trunk/fcoe-client/RPMNAME Tue Apr 19 13:00:01 2011 @@ -0,0 +1 @@ +yast2-fcoe-client Added: trunk/fcoe-client/VERSION URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/VERSION?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/VERSION (added) +++ trunk/fcoe-client/VERSION Tue Apr 19 13:00:01 2011 @@ -0,0 +1 @@ +2.15.0 Added: trunk/fcoe-client/_cvsignore URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/_cvsignore?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/_cvsignore (added) +++ trunk/fcoe-client/_cvsignore Tue Apr 19 13:00:01 2011 @@ -0,0 +1,20 @@ +Makefile +Makefile.am +Makefile.am.common +Makefile.in +aclocal.m4 +config.cache +config.guess +config.h.in +config.log +config.status +config.sub +configure +configure.in +depcomp +install-sh +missing +mkinstalldirs +stamp-h +fcoe-client.pot +autom4te.cache Added: trunk/fcoe-client/agents/Makefile.am URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/agents/Makefile.am?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/agents/Makefile.am (added) +++ trunk/fcoe-client/agents/Makefile.am Tue Apr 19 13:00:01 2011 @@ -0,0 +1,7 @@ +# Makefile.am for fcoe-client/agents + +agent_SCRIPTS = + +scrconf_DATA = + +EXTRA_DIST = $(agent_SCRIPTS) $(scrconf_DATA) Added: trunk/fcoe-client/agents/_cvsignore URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/agents/_cvsignore?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/agents/_cvsignore (added) +++ trunk/fcoe-client/agents/_cvsignore Tue Apr 19 13:00:01 2011 @@ -0,0 +1,2 @@ +Makefile +Makefile.in Added: trunk/fcoe-client/configure.in.in URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/configure.in.in?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/configure.in.in (added) +++ trunk/fcoe-client/configure.in.in Tue Apr 19 13:00:01 2011 @@ -0,0 +1,12 @@ +## YCP module configure.in.in + +## Initialize +@YAST2-INIT-COMMON@ +@YAST2-INIT-YCP@ + +## some common checks +@YAST2-CHECKS-COMMON@ +@YAST2-CHECKS-YCP@ + +## and generate the output... +@YAST2-OUTPUT@ Added: trunk/fcoe-client/doc/Makefile.am URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/doc/Makefile.am?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/doc/Makefile.am (added) +++ trunk/fcoe-client/doc/Makefile.am Tue Apr 19 13:00:01 2011 @@ -0,0 +1,10 @@ +# Makefile.am for fcoe-client/doc + +SUBDIRS = autodocs + +htmldir = $(docdir) + +doc_DATA = +html_DATA = + +EXTRA_DIST = $(doc_DATA) $(html_DATA) Added: trunk/fcoe-client/doc/_cvsignore URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/doc/_cvsignore?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/doc/_cvsignore (added) +++ trunk/fcoe-client/doc/_cvsignore Tue Apr 19 13:00:01 2011 @@ -0,0 +1,2 @@ +Makefile +Makefile.in Added: trunk/fcoe-client/doc/autodocs/Makefile.am URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/doc/autodocs/Makefile.am?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/doc/autodocs/Makefile.am (added) +++ trunk/fcoe-client/doc/autodocs/Makefile.am Tue Apr 19 13:00:01 2011 @@ -0,0 +1,3 @@ +# Makefile.am for fcoe-client/doc/autodocs + +include $(top_srcdir)/autodocs-ycp.ami Added: trunk/fcoe-client/doc/autodocs/_cvsignore URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/doc/autodocs/_cvsignore?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/doc/autodocs/_cvsignore (added) +++ trunk/fcoe-client/doc/autodocs/_cvsignore Tue Apr 19 13:00:01 2011 @@ -0,0 +1,3 @@ +Makefile +Makefile.in +*.html Added: trunk/fcoe-client/package/_cvsignore URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/package/_cvsignore?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/package/_cvsignore (added) +++ trunk/fcoe-client/package/_cvsignore Tue Apr 19 13:00:01 2011 @@ -0,0 +1,2 @@ +*.spec +*.bz2 Added: trunk/fcoe-client/package/yast2-fcoe-client.changes URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/package/yast2-fcoe-client.changes?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/package/yast2-fcoe-client.changes (added) +++ trunk/fcoe-client/package/yast2-fcoe-client.changes Tue Apr 19 13:00:01 2011 @@ -0,0 +1,4 @@ +------------------------------------------------------------------- +Tue Apr 19 12:42:00 2011 - gs@suse.de + +- initial version Added: trunk/fcoe-client/src/FcoeClient.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/src/FcoeClient.ycp?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/src/FcoeClient.ycp (added) +++ trunk/fcoe-client/src/FcoeClient.ycp Tue Apr 19 13:00:01 2011 @@ -0,0 +1,322 @@ +/* ------------------------------------------------------------------------------ + * Copyright (c) 2006 Novell, Inc. All Rights Reserved. + * + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of version 2 of the GNU General Public License as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, contact Novell, Inc. + * + * To contact Novell about this file by physical or electronic mail, you may find + * current contact information at www.novell.com. + * ------------------------------------------------------------------------------ + */ + +/** + * File: modules/FcoeClient.ycp + * Package: Configuration of fcoe-client + * Summary: FcoeClient settings, input and output functions + * Authors: Gabriele Mohr + * + * + * Representation of the configuration of fcoe-client. + * Input and output routines. + */ + +{ + +module "FcoeClient"; +textdomain "fcoe-client"; + +import "Progress"; +import "Report"; +import "Summary"; +import "Message"; + +/** + * Prototypes + */ +global boolean Modified(); + +/** + * Data was modified? + */ +boolean modified = false; + +/** + */ +boolean proposal_valid = false; + +/** + * Write only, used during autoinstallation. + * Don't run services and SuSEconfig, it's all done at one place. + */ +boolean write_only = false; + +/** + * Abort function + * return boolean return true if abort + */ +boolean() AbortFunction = Modified; + +/** + * Abort function + * @return boolean return true if abort + */ +global define boolean Abort() ``{ + if(AbortFunction != nil) + { + return AbortFunction () == true; + } + return false; +} + +/** + * Data was modified? + * @return true if modified + */ +global boolean Modified() { + y2debug("modified=%1",modified); + return modified; +} + +/** + * Mark as modified, for Autoyast. + */ +global void SetModified(boolean value) { + modified = true; + } + +global boolean ProposalValid() { + return proposal_valid; +} + +global void SetProposalValid(boolean value) { + proposal_valid = value; +} + +/** + * @return true if module is marked as "write only" (don't start services etc...) + */ +global boolean WriteOnly() { + return write_only; +} + +/** + * Set write_only flag (for autoinstalation). + */ +global void SetWriteOnly(boolean value) { + write_only = value; +} + + +global void SetAbortFunction(boolean() function) { + AbortFunction = function; +} + + +// Settings: Define all variables needed for configuration of fcoe-client +// TODO FIXME: Define all the variables necessary to hold +// TODO FIXME: the configuration here (with the appropriate +// TODO FIXME: description) +// TODO FIXME: For example: +// /** +// * List of the configured cards. +// */ +// list cards = []; +// +// /** +// * Some additional parameter needed for the configuration. +// */ +// boolean additional_parameter = true; + +/** + * Read all fcoe-client settings + * @return true on success + */ +global boolean Read() { + + /* FcoeClient read dialog caption */ + string caption = _("Initializing fcoe-client Configuration"); + + // TODO FIXME Set the right number of stages + integer steps = 4; + + integer sl = 500; + sleep(sl); + + // TODO FIXME Names of real stages + // We do not set help text here, because it was set outside + Progress::New( caption, " ", steps, [ + /* Progress stage 1/3 */ + _("Read the database"), + /* Progress stage 2/3 */ + _("Read the previous settings"), + /* Progress stage 3/3 */ + _("Detect the devices") + ], [ + /* Progress step 1/3 */ + _("Reading the database..."), + /* Progress step 2/3 */ + _("Reading the previous settings..."), + /* Progress step 3/3 */ + _("Detecting the devices..."), + /* Progress finished */ + _("Finished") + ], + "" + ); + + // read database + if(Abort()) return false; + Progress::NextStage(); + /* Error message */ + if(false) Report::Error(_("Cannot read database1.")); + sleep(sl); + + // read another database + if(Abort()) return false; + Progress::NextStep(); + /* Error message */ + if(false) Report::Error(_("Cannot read database2.")); + sleep(sl); + + // read current settings + if(Abort()) return false; + Progress::NextStage(); + /* Error message */ + if(false) Report::Error(Message::CannotReadCurrentSettings()); + sleep(sl); + + // detect devices + if(Abort()) return false; + Progress::NextStage(); + /* Error message */ + if(false) Report::Warning(_("Cannot detect devices.")); + sleep(sl); + + if(Abort()) return false; + /* Progress finished */ + Progress::NextStage(); + sleep(sl); + + if(Abort()) return false; + modified = false; + return true; +} + +/** + * Write all fcoe-client settings + * @return true on success + */ +global boolean Write() { + + /* FcoeClient read dialog caption */ + string caption = _("Saving fcoe-client Configuration"); + + // TODO FIXME And set the right number of stages + integer steps = 2; + + integer sl = 500; + sleep(sl); + + // TODO FIXME Names of real stages + // We do not set help text here, because it was set outside + Progress::New(caption, " ", steps, [ + /* Progress stage 1/2 */ + _("Write the settings"), + /* Progress stage 2/2 */ + _("Run SuSEconfig") + ], [ + /* Progress step 1/2 */ + _("Writing the settings..."), + /* Progress step 2/2 */ + _("Running SuSEconfig..."), + /* Progress finished */ + _("Finished") + ], + "" + ); + + // write settings + if(Abort()) return false; + Progress::NextStage(); + /* Error message */ + if(false) Report::Error (_("Cannot write settings.")); + sleep(sl); + + // run SuSEconfig + if(Abort()) return false; + Progress::NextStage (); + /* Error message */ + if(false) Report::Error (Message::SuSEConfigFailed()); + sleep(sl); + + if(Abort()) return false; + /* Progress finished */ + Progress::NextStage(); + sleep(sl); + + if(Abort()) return false; + return true; +} + +/** + * Get all fcoe-client settings from the first parameter + * (For use by autoinstallation.) + * @param settings The YCP structure to be imported. + * @return boolean True on success + */ +global boolean Import (map settings) { + // TODO FIXME: your code here (fill the above mentioned variables)... + return true; +} + +/** + * Dump the fcoe-client settings to a single map + * (For use by autoinstallation.) + * @return map Dumped settings (later acceptable by Import ()) + */ +global map Export () { + // TODO FIXME: your code here (return the above mentioned variables)... + return $[]; +} + +/** + * Create a textual summary and a list of unconfigured cards + * @return summary of the current configuration + */ +global list Summary() { + // TODO FIXME: your code here... + /* Configuration summary text for autoyast */ + return [ _("Configuration summary..."), [] ]; +} + +/** + * Create an overview table with all configured cards + * @return table items + */ +global list Overview() { + // TODO FIXME: your code here... + return []; +} + +/** + * Return packages needed to be installed and removed during + * Autoinstallation to insure module has all needed software + * installed. + * @return map with 2 lists. + */ +global map AutoPackages() { + // TODO FIXME: your code here... + return $[ "install":[], "remove":[] ]; +} + +/* EOF */ +} Added: trunk/fcoe-client/src/FcoeClient2.pm URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/src/FcoeClient2.pm?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/src/FcoeClient2.pm (added) +++ trunk/fcoe-client/src/FcoeClient2.pm Tue Apr 19 13:00:01 2011 @@ -0,0 +1,326 @@ +#! /usr/bin/perl -w + +# ------------------------------------------------------------------------------ +# Copyright (c) 2006 Novell, Inc. All Rights Reserved. +# +# +# This program is free software; you can redistribute it and/or modify it under +# the terms of version 2 of the GNU General Public License as published by the +# Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, contact Novell, Inc. +# +# To contact Novell about this file by physical or electronic mail, you may find +# current contact information at www.novell.com. +# ------------------------------------------------------------------------------ + +# File: modules/FcoeClient.pm +# Package: Configuration of fcoe-client +# Summary: FcoeClient settings, input and output functions +# Authors: Gabriele Mohr +# +# $Id: FcoeClient2.pm 41350 2007-10-10 16:59:00Z dfiser $ +# +# Representation of the configuration of fcoe-client. +# Input and output routines. + + +package FcoeClient; + +use strict; + +use YaST::YCP qw(Boolean :LOGGING); +use YaPI; + +textdomain("fcoe-client"); + +our %TYPEINFO; + +YaST::YCP::Import ("Progress"); +YaST::YCP::Import ("Report"); +YaST::YCP::Import ("Summary"); +YaST::YCP::Import ("Message"); + +## + # Data was modified? + # +my $modified = 0; + +## + # +my $proposal_valid = 0; + +## + # Write only, used during autoinstallation. + # Don't run services and SuSEconfig, it's all done at one place. + # +my $write_only = 0; + +## + # Data was modified? + # @return true if modified + # +BEGIN { $TYPEINFO {Modified} = ["function", "boolean"]; } +sub Modified { + y2debug ("modified=$modified"); + return Boolean($modified); +} + +## + # Mark as modified, for Autoyast. + # +BEGIN { $TYPEINFO {SetModified} = ["function", "void", "boolean" ]; } +sub SetModified { + my $value = $_[1]; + $modified = $value; +} + +BEGIN { $TYPEINFO {ProposalValid} = ["function", "boolean"]; } +sub ProposalValid { + return Boolean($proposal_valid); +} + +BEGIN { $TYPEINFO {SetProposalValid} = ["function", "void", "boolean" ]; } +sub SetProposalValid{ + my $value = $_[1]; + $proposal_valid = $value; +} + +BEGIN { $TYPEINFO {WriteOnly} = ["function", "boolean"]; } +sub WriteOnly { + return Boolean($write_only); +} + +BEGIN { $TYPEINFO {SetWriteOnly} = ["function", "void", "boolean" ]; } +sub SetWriteOnly{ + my $value = $_[1]; + $write_only = $value; +} + + +# Settings: Define all variables needed for configuration of fcoe-client +# TODO FIXME: Define all the variables necessary to hold +# TODO FIXME: the configuration here (with the appropriate +# TODO FIXME: description) +# TODO FIXME: For example: +# ## +# # List of the configured cards. +# # +# my @cards = (); +# +# ## +# # Some additional parameter needed for the configuration. +# # +# my $additional_parameter = 1; + +## + # Read all fcoe-client settings + # @return true on success + # +BEGIN { $TYPEINFO{Read} = ["function", "boolean"]; } +sub Read { + + # FcoeClient read dialog caption + my $caption = __("Initializing fcoe-client Configuration"); + + # TODO FIXME Set the right number of stages + my $steps = 4; + + my $sl = 0.5; + sleep($sl); + + # TODO FIXME Names of real stages + # We do not set help text here, because it was set outside + Progress->New( $caption, " ", $steps, [ + # Progress stage 1/3 + __("Read the database"), + # Progress stage 2/3 + __("Read the previous settings"), + # Progress stage 3/3 + __("Detect the devices") + ], [ + # Progress step 1/3 + __("Reading the database..."), + # Progress step 2/3 + __("Reading the previous settings..."), + # Progress step 3/3 + __("Detecting the devices..."), + # Progress finished + __("Finished") + ], + "" + ); + + # read database + Progress->NextStage(); + # Error message + if(0) + { + Report->Error(__("Cannot read the database1.")); + } + sleep($sl); + + # read another database + Progress->NextStep(); + # Error message + if(0) + { + Report->Error(__("Cannot read the database2.")); + } + sleep($sl); + + # read current settings + Progress->NextStage(); + # Error message + if(0) + { + Report->Error(Message->CannotReadCurrentSettings()); + } + sleep($sl); + + # detect devices + Progress->NextStage(); + # Error message + if(0) + { + Report->Warning(__("Cannot detect devices.")); + } + sleep($sl); + + # Progress finished + Progress->NextStage(); + sleep($sl); + + $modified = 0; + return Boolean(1); +} + +## + # Write all fcoe-client settings + # @return true on success + # +BEGIN { $TYPEINFO{Write} = ["function", "boolean"]; } +sub Write { + + # FcoeClient read dialog caption + my $caption = __("Saving fcoe-client Configuration"); + + # TODO FIXME And set the right number of stages + my $steps = 2; + + my $sl = 0.5; + sleep($sl); + + # TODO FIXME Names of real stages + # We do not set help text here, because it was set outside + Progress->New($caption, " ", $steps, [ + # Progress stage 1/2 + __("Write the settings"), + # Progress stage 2/2 + __("Run SuSEconfig") + ], [ + # Progress step 1/2 + __("Writing the settings..."), + # Progress step 2/2 + __("Running SuSEconfig..."), + # Progress finished + __("Finished") + ], + "" + ); + + # write settings + Progress->NextStage(); + # Error message + if(0) + { + Report->Error (__("Cannot write settings.")); + } + sleep($sl); + + # run SuSEconfig + Progress->NextStage (); + # Error message + if(0) + { + Report->Error (Message->SuSEConfigFailed()); + } + sleep($sl); + + # Progress finished + Progress->NextStage(); + sleep($sl); + + return Boolean(1); +} + +## + # Get all fcoe-client settings from the first parameter + # (For use by autoinstallation.) + # @param settings The YCP structure to be imported. + # @return boolean True on success + # +BEGIN { $TYPEINFO{Import} = ["function", "boolean", [ "map", "any", "any" ] ]; } +sub Import { + my %settings = %{$_[0]}; + # TODO FIXME: your code here (fill the above mentioned variables)... + return Boolean(1); +} + +## + # Dump the fcoe-client settings to a single map + # (For use by autoinstallation.) + # @return map Dumped settings (later acceptable by Import ()) + # +BEGIN { $TYPEINFO{Export} =["function", [ "map", "any", "any" ] ]; } +sub Export { + # TODO FIXME: your code here (return the above mentioned variables)... + return {}; +} + +## + # Create a textual summary and a list of unconfigured cards + # @return summary of the current configuration + # +BEGIN { $TYPEINFO{Summary} = ["function", [ "list", "string" ] ]; } +sub Summary { + # TODO FIXME: your code here... + # Configuration summary text for autoyast + return ( + __("Configuration summary ...") + ); +} + +## + # Create an overview table with all configured cards + # @return table items + # +BEGIN { $TYPEINFO{Overview} = ["function", [ "list", "string" ] ]; } +sub Overview { + # TODO FIXME: your code here... + return (); +} + +## + # Return packages needed to be installed and removed during + # Autoinstallation to insure module has all needed software + # installed. + # @return map with 2 lists. + # +BEGIN { $TYPEINFO{AutoPackages} = ["function", ["map", "string", ["list", "string"]]]; } +sub AutoPackages { + # TODO FIXME: your code here... + my %ret = ( + "install" => (), + "remove" => (), + ); + return \%ret; +} + +1; +# EOF Added: trunk/fcoe-client/src/FcoeClient3.py URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/src/FcoeClient3.py?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/src/FcoeClient3.py (added) +++ trunk/fcoe-client/src/FcoeClient3.py Tue Apr 19 13:00:01 2011 @@ -0,0 +1,301 @@ +#!/usr/bin/env python + +# ------------------------------------------------------------------------------ +# Copyright (c) 2006 Novell, Inc. All Rights Reserved. +# +# +# This program is free software; you can redistribute it and/or modify it under +# the terms of version 2 of the GNU General Public License as published by the +# Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, contact Novell, Inc. +# +# To contact Novell about this file by physical or electronic mail, you may find +# current contact information at www.novell.com. +# ------------------------------------------------------------------------------ + +# File: modules/FcoeClient3.py +# Package: Configuration of fcoe-client +# Summary: FcoeClient settings, input and output functions +# Authors: Gabriele Mohr +# +# $Id: FcoeClient3.py 27914 2006-02-13 14:32:08Z locilka $ +# +# Representation of the configuration of fcoe-client. +# Input and output routines. + + +from time import sleep +from YCPDeclarations import YCPDeclare +import ycp +from ycp import Term, Symbol, Path +from ycp import y2internal, y2security, y2error, y2warning, y2milestone, y2debug + +## + # Set textdomain + # +import gettext +gettext.install("fcoe-client") + +ycp.import_module("Progress") +ycp.import_module("Report") +ycp.import_module("Summary") +ycp.import_module("Message") + +## + # Data was modified? + # +modified = False + +## + # +proposal_valid = False + +## + # Write only, used during autoinstallation. + # Don't run services and SuSEconfig, it's all done at one place. + # +write_only = False + +## + # Data was modified? + # @return true if modified + # +@YCPDeclare("boolean") +def Modified(): + global modified + y2debug ("modified=%d" % (modified)); + return modified + +## + # Mark as modified, for Autoyast. + # +@YCPDeclare("void", "boolean") +def SetModified(value): + global modified + modified = value + +@YCPDeclare("boolean") +def ProposalValid(): + global proposal_valid + return proposal_valid + +@YCPDeclare("void", "boolean") +def SetProposalValid(value): + global proposal_valid + proposal_valid = value + +@YCPDeclare("boolean") +def WriteOnly(): + global write_only + return write_only + +@YCPDeclare("void", "boolean") +def SetWriteOnly(value): + global write_only + write_only = value + + +# Settings: Define all variables needed for configuration of fcoe-client +# TODO FIXME: Define all the variables necessary to hold +# TODO FIXME: the configuration here (with the appropriate +# TODO FIXME: description) +# TODO FIXME: For example: +# ## +# # List of the configured cards. +# # +# cards = [] +# +# ## +# # Some additional parameter needed for the configuration. +# # +# additional_parameter = 1 + +## + # Read all fcoe-client settings + # @return true on success + # +@YCPDeclare("boolean") +def Read(): + global modified + + # FcoeClient read dialog caption + caption = _("Initializing fcoe-client Configuration") + + # TODO FIXME Set the right number of stages + steps = 4 + + sl = 0.5 + sleep(sl) + + # TODO FIXME Names of real stages + # We do not set help text here, because it was set outside + ycp.Progress.New(caption, " ", steps, [ + # Progress stage 1/3 + _("Read the database"), + # Progress stage 2/3 + _("Read the previous settings"), + # Progress stage 3/3 + _("Detect the devices") + ], [ + # Progress step 1/3 + _("Reading the database..."), + # Progress step 2/3 + _("Reading the previous settings..."), + # Progress step 3/3 + _("Detecting the devices..."), + # Progress finished + _("Finished") + ], + "" + ) + + # read database + ycp.Progress.NextStage(); + # Error message + if False: + ycp.Report.Error(_("Cannot read the database1.")) + sleep(sl) + + # read another database + ycp.Progress.NextStep() + # Error message + if False: + ycp.Report.Error(_("Cannot read the database2.")) + sleep(sl) + + # read current settings + ycp.Progress.NextStage() + # Error message + if False: + ycp.Report.Error(ycp.Message.CannotReadCurrentSettings()) + sleep(sl) + + # detect devices + ycp.Progress.NextStage() + # Error message + if False: + ycp.Report.Warning(_("Cannot detect devices.")) + sleep(sl) + + # Progress finished + ycp.Progress.NextStage() + sleep(sl) + + modified = False + + return True + +## + # Write all fcoe-client settings + # @return true on success + # +@YCPDeclare("boolean") +def Write(): + # FcoeClient read dialog caption + caption = _("Saving fcoe-client Configuration") + + # TODO FIXME And set the right number of stages + steps = 2 + + sl = 0.5 + sleep(sl) + + # TODO FIXME Names of real stages + # We do not set help text here, because it was set outside + ycp.Progress.New(caption, " ", steps, [ + # Progress stage 1/2 + _("Write the settings"), + # Progress stage 2/2 + _("Run SuSEconfig") + ], [ + # Progress step 1/2 + _("Writing the settings..."), + # Progress step 2/2 + _("Running SuSEconfig..."), + # Progress finished + _("Finished") + ], + "" + ) + + # write settings + ycp.Progress.NextStage() + # Error message + if False: + ycp.Report.Error (_("Cannot write settings.")) + sleep(sl) + + # run SuSEconfig + ycp.Progress.NextStage() + # Error message + if False: + ycp.Report.Error(ycp.Message.SuSEConfigFailed()) + sleep(sl) + + # Progress finished + ycp.Progress.NextStage() + sleep(sl) + + return True + +## + # Get all fcoe-client settings from the first parameter + # (For use by autoinstallation.) + # @param settings The YCP structure to be imported. + # @return boolean True on success + # +@YCPDeclare("boolean", "map") +def Import(map_settings): + # TODO FIXME: your code here (fill the above mentioned variables)... + return True + +## + # Dump the fcoe-client settings to a single map + # (For use by autoinstallation.) + # @return map Dumped settings (later acceptable by Import ()) + # +@YCPDeclare("map") +def Export(): + # TODO FIXME: your code here (return the above mentioned variables)... + return {} + +## + # Create a textual summary and a list of unconfigured cards + # @return summary of the current configuration + # +@YCPDeclare("list") +def Summary(): + # TODO FIXME: your code here... + # Configuration summary text for autoyast + return [ _("Configuration summary ...") ] + +## + # Create an overview table with all configured cards + # @return table items + # +@YCPDeclare("list") +def Overview(): + # TODO FIXME: your code here... + return [] + +## + # Return packages needed to be installed and removed during + # Autoinstallation to insure module has all needed software + # installed. + # @return map with 2 lists. + # +@YCPDeclare("map") +def AutoPackages(): + # TODO FIXME: your code here... + return { + "install" : [], + "remove" : [] + } + +# EOF Added: trunk/fcoe-client/src/Makefile.am URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/src/Makefile.am?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/src/Makefile.am (added) +++ trunk/fcoe-client/src/Makefile.am Tue Apr 19 13:00:01 2011 @@ -0,0 +1,31 @@ +# Makefile.am for fcoe-client/src + +yncludedir = @yncludedir@/fcoe-client + +client_DATA = \ + fcoe-client.ycp \ + fcoe-client_auto.ycp \ + fcoe-client_proposal.ycp + +ynclude_DATA = \ + helps.ycp \ + wizards.ycp \ + dialogs.ycp \ + complex.ycp + +desktop_DATA = \ + fcoe-client.desktop + +module_DATA = \ + FcoeClient.ycp \ + FcoeClient2.pm \ + FcoeClient3.py + +# create a symlink for local build, #145327 +fcoe-client: + ln -sf . $@ +ycpchook = fcoe-client + +EXTRA_DIST = $(client_DATA) $(ynclude_DATA) $(module_DATA) $(desktop_DATA) + +include $(top_srcdir)/Makefile.am.common Added: trunk/fcoe-client/src/_cvsignore URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/src/_cvsignore?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/src/_cvsignore (added) +++ trunk/fcoe-client/src/_cvsignore Tue Apr 19 13:00:01 2011 @@ -0,0 +1,4 @@ +Makefile +Makefile.in +*.ybc +.dep Added: trunk/fcoe-client/src/complex.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/src/complex.ycp?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/src/complex.ycp (added) +++ trunk/fcoe-client/src/complex.ycp Tue Apr 19 13:00:01 2011 @@ -0,0 +1,138 @@ +/* ------------------------------------------------------------------------------ + * Copyright (c) 2006 Novell, Inc. All Rights Reserved. + * + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of version 2 of the GNU General Public License as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, contact Novell, Inc. + * + * To contact Novell about this file by physical or electronic mail, you may find + * current contact information at www.novell.com. + * ------------------------------------------------------------------------------ + */ + +/** + * File: include/fcoe-client/complex.ycp + * Package: Configuration of fcoe-client + * Summary: Dialogs definitions + * Authors: Gabriele Mohr + * + */ + +{ + +textdomain "fcoe-client"; + +import "Label"; +import "Popup"; +import "Wizard"; +import "Wizard_hw"; +import "Confirm"; +import "FcoeClient"; + + +include "fcoe-client/helps.ycp"; + +/** + * Return a modification status + * @return true if data was modified + */ +boolean Modified() { + return FcoeClient::Modified(); +} + +boolean ReallyAbort() { + return !FcoeClient::Modified() || Popup::ReallyAbort(true); +} + +boolean PollAbort() { + return UI::PollInput() == `abort; +} + +/** + * Read settings dialog + * @return `abort if aborted and `next otherwise + */ +symbol ReadDialog() { + Wizard::RestoreHelp(HELPS["read"]:""); + // FcoeClient::SetAbortFunction(PollAbort); + if (!Confirm::MustBeRoot()) return `abort; + boolean ret = FcoeClient::Read(); + return ret ? `next : `abort; +} + +/** + * Write settings dialog + * @return `abort if aborted and `next otherwise + */ +symbol WriteDialog() { + Wizard::RestoreHelp(HELPS["write"]:""); + // FcoeClient::SetAbortFunction(PollAbort); + boolean ret = FcoeClient::Write(); + return ret ? `next : `abort; +} + +/** + * Init + **/ +void InitServicesDialog (string id) { + y2milestone( "Init services dialog" ); +} + +void InitInterfacesDialog (string id) { + y2milestone( "Init interfaces dialog" ); +} + +void InitConfigurationDialog (string id) { + y2milestone( "Init configuration dialog" ); +} + +/** + * Handle + **/ +symbol HandleServicesDialog( string id, map event ) +{ + any action = event["ID"]:nil; + return nil; +} + +symbol HandleInterfacesDialog( string id, map event ) +{ + any action = event["ID"]:nil; + y2milestone( "Action: %1, returning `edit", action); + if ( action == `edit ) + return `edit; + return nil; +} + +symbol HandleConfigurationDialog( string id, map event ) +{ + any action = event["ID"]:nil; + return nil; +} + +/** + * Store + **/ + +void StoreServicesDialog (string id, map event) { + y2milestone( "Store services dialog" ); +} + +void StoreInterfacesDialog (string id, map event) { + y2milestone( "Store interfaces dialog" ); +} + +void StoreConfigurationDialog (string id, map event) { + y2milestone( "Store configuration dialog" ); +} + +/* EOF */ +} Added: trunk/fcoe-client/src/dialogs.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/src/dialogs.ycp?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/src/dialogs.ycp (added) +++ trunk/fcoe-client/src/dialogs.ycp Tue Apr 19 13:00:01 2011 @@ -0,0 +1,128 @@ +/* ------------------------------------------------------------------------------ + * Copyright (c) 2006 Novell, Inc. All Rights Reserved. + * + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of version 2 of the GNU General Public License as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, contact Novell, Inc. + * + * To contact Novell about this file by physical or electronic mail, you may find + * current contact information at www.novell.com. + * ------------------------------------------------------------------------------ + */ + +/** + * File: include/fcoe-client/dialogs.ycp + * Package: Configuration of fcoe-client + * Summary: Dialogs definitions + * Authors: Gabriele Mohr + * + */ + +{ + + textdomain "fcoe-client"; + + import "Label"; + import "Wizard"; + import "FcoeClient"; + + include "fcoe-client/helps.ycp"; + +integer mbox_x = 1; +integer mbox_y = 0.5; + +term items = `VBox( + `VSpacing (0.4), + `Left (`RadioButton (`id ("startup_auto"), `opt (`notify), + "When Booting")), + `Left (`RadioButton (`id ("startup_manual"), `opt (`notify), + "Manually") + ), + `VSpacing (0.4) + ); + +symbol EditDialog() { + + y2milestone( "Edit dialog ***" ); + return `next; +} + +/** + * Services dialog + * @return term + */ + +term ServicesDialogContent () { + + return `MarginBox( mbox_x, mbox_y, + `VBox ( + `VSpacing(2.0), + // frame + `Frame (_("Service Start"), + `VBox (`RadioButtonGroup (`id ("service_startup"), items)) + ), + `VStretch() + ) + ); +} + +/** + * Interfaces dialog + * @return term + */ +term InterfacesDialogContent () { + return `MarginBox( mbox_x, mbox_y, + `VBox( + `Table(`id(`interfaces), `opt(`notify, `immediate ), + `header(_("Portal Address"), _("Target Name"), _("Start-Up")), + [] + ), + `Left(`HBox( + `PushButton(`id(`add), _("Add")), + `PushButton(`id(`edit), _("Edit")) + )) + ) + ); +} + +/** + * Configuration dialog + * @return term + */ +term ConfigurationDialogContent() { + return `MarginBox( mbox_x, mbox_y, + `VBox( + `VSpacing(2.0), + `Frame ( + // Frame label - configuration settings of FCoE + _("Configuration Settings"), + `VBox ( + // ComboBox label + `Left(`ComboBox(`id("debug"), _("&Debug"), + [`item(`id("yes"), "yes", true ), + `item(`id("no"), "no" ) + ]) + ), + `Left(`ComboBox(`id("syslog"), _("&Use syslog"), + [`item(`id("yes"), "yes", true ), + `item(`id("no"), "no" ) + ]) + ) + ) + ), + `VStretch() + ) + ); +} + + +/* EOF */ +} Added: trunk/fcoe-client/src/fcoe-client.desktop URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/src/fcoe-client.desktop?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/src/fcoe-client.desktop (added) +++ trunk/fcoe-client/src/fcoe-client.desktop Tue Apr 19 13:00:01 2011 @@ -0,0 +1,25 @@ +[Desktop Entry] +Type=Application +Categories=Settings;System;Qt;X-SuSE-YaST;X-SuSE-YaST-Misc; + +X-KDE-ModuleType=Library +X-KDE-RootOnly=true +X-KDE-HasReadOnlyMode=true +X-KDE-Library=yast2 +X-SuSE-YaST-Call=fcoe-client + +X-SuSE-YaST-Group=Misc +X-SuSE-YaST-Argument= +X-SuSE-YaST-RootOnly=true +X-SuSE-YaST-AutoInst= +X-SuSE-YaST-Geometry= +X-SuSE-YaST-SortKey= +X-SuSE-YaST-AutoInstResource=fcoe-client + +Icon=yast-fcoe-client +Exec=/sbin/yast2 fcoe-client + +Name=FcoeClient +GenericName=fcoe-client +X-KDE-SubstituteUID=true +StartupNotify=true Added: trunk/fcoe-client/src/fcoe-client.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/src/fcoe-client.ycp?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/src/fcoe-client.ycp (added) +++ trunk/fcoe-client/src/fcoe-client.ycp Tue Apr 19 13:00:01 2011 @@ -0,0 +1,93 @@ +/* ------------------------------------------------------------------------------ + * Copyright (c) 2006 Novell, Inc. All Rights Reserved. + * + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of version 2 of the GNU General Public License as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, contact Novell, Inc. + * + * To contact Novell about this file by physical or electronic mail, you may find + * current contact information at www.novell.com. + * ------------------------------------------------------------------------------ + */ + +/** + * File: clients/fcoe-client.ycp + * Package: Configuration of fcoe-client + * Summary: Main file + * Authors: Gabriele Mohr + * + * $Id: fcoe-client.ycp 27914 2006-02-13 14:32:08Z locilka $ + * + * Main file for fcoe-client configuration. Uses all other files. + */ + +{ + +/*** + * <h3>Configuration of fcoe-client</h3> + */ + +textdomain "fcoe-client"; + +/* The main () */ +y2milestone ("----------------------------------------"); +y2milestone ("FcoeClient module started"); + +import "Progress"; +import "Report"; +import "Summary"; + +import "CommandLine"; +include "fcoe-client/wizards.ycp"; + +map cmdline_description = $[ + "id" : "fcoe-client", + /* Command line help text for the Xfcoe-client module */ + "help" : _("Configuration of fcoe-client"), + "guihandler" : FcoeClientSequence, + "initialize" : FcoeClient::Read, + "finish" : FcoeClient::Write, + "actions" : $[ + // FIXME TODO: fill the functionality description here + ], + "options" : $[ + // FIXME TODO: fill the option descriptions here + ], + "mappings" : $[ + // FIXME TODO: fill the mappings of actions and options here + ] +]; + +/* is this proposal or not? */ +boolean propose = false; +list args = WFM::Args(); +if(size(args) > 0) { + if(is(WFM::Args(0), path) && WFM::Args(0) == .propose) { + y2milestone("Using PROPOSE mode"); + propose = true; + } +} + +/* main ui function */ +any ret = nil; + +if(propose) ret = FcoeClientAutoSequence(); +else ret = CommandLine::Run(cmdline_description); +y2debug("ret=%1", ret); + +/* Finish */ +y2milestone("FcoeClient module finished"); +y2milestone("----------------------------------------"); + +return ret; + +/* EOF */ +} Added: trunk/fcoe-client/src/fcoe-client_auto.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/src/fcoe-client_auto.ycp?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/src/fcoe-client_auto.ycp (added) +++ trunk/fcoe-client/src/fcoe-client_auto.ycp Tue Apr 19 13:00:01 2011 @@ -0,0 +1,133 @@ +/* ------------------------------------------------------------------------------ + * Copyright (c) 2006 Novell, Inc. All Rights Reserved. + * + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of version 2 of the GNU General Public License as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, contact Novell, Inc. + * + * To contact Novell about this file by physical or electronic mail, you may find + * current contact information at www.novell.com. + * ------------------------------------------------------------------------------ + */ + +/** + * File: clients/fcoe-client_auto.ycp + * Package: Configuration of fcoe-client + * Summary: Client for autoinstallation + * Authors: Gabriele Mohr + * + * + * This is a client for autoinstallation. It takes its arguments, + * goes through the configuration and return the setting. + * Does not do any changes to the configuration. + */ + +/** + * @param function to execute + * @param map/list of fcoe-client settings + * @return map edited settings, Summary or boolean on success depending on called function + * @example map mm = $[ "FAIL_DELAY" : "77" ]; + * @example map ret = WFM::CallFunction ("fcoe-client_auto", [ "Summary", mm ]); + */ + +{ + +textdomain "fcoe-client"; + +y2milestone("----------------------------------------"); +y2milestone("FcoeClient auto started"); + +import "FcoeClient"; +include "fcoe-client/wizards.ycp"; + +any ret = nil; +string func = ""; +map param = $[]; + +/* Check arguments */ +if(size(WFM::Args()) > 0 && is(WFM::Args(0), string)) { + func = (string)WFM::Args(0); + if(size(WFM::Args()) > 1 && is(WFM::Args(1), map)) + param = (map) WFM::Args(1); +} +y2debug("func=%1", func); +y2debug("param=%1", param); + +/* Create a summary*/ +if(func == "Summary") { + ret = select(FcoeClient::Summary(), 0, ""); +} +/* Reset configuration */ +else if (func == "Reset") { + FcoeClient::Import($[]); + ret = $[]; +} +/* Change configuration (run AutoSequence) */ +else if (func == "Change") { + ret = FcoeClientAutoSequence(); +} +/* Import configuration */ +else if (func == "Import") { + ret = FcoeClient::Import(param); +} +/* Return actual state */ +else if (func == "Export") { + ret = FcoeClient::Export(); +} +/* Return needed packages */ +else if (func == "Packages") { + ret = FcoeClient::AutoPackages(); +} +/* Read current state */ +else if (func == "Read") { + import "Progress"; + boolean progress_orig = Progress::set (false); + ret = FcoeClient::Read(); + Progress::set (progress_orig); +} +/* Write givven settings */ +else if (func == "Write") { + import "Progress"; + boolean progress_orig = Progress::set (false); + FcoeClient::SetWriteOnly (true); + ret = FcoeClient::Write(); + Progress::set (progress_orig); +} +/** + * did configuration changed + * return boolean + */ +else if (func == "GetModified") { + ret = FcoeClient::Modified (); +} +/** + * set configuration as changed + * return boolean + */ +else if (func == "SetModified") { + FcoeClient::SetModified (true); + ret = true; +} + +/* Unknown function */ +else { + y2error("Unknown function: %1", func); + ret = false; +} + +y2debug("ret=%1", ret); +y2milestone("FcoeClient auto finished"); +y2milestone("----------------------------------------"); + +return ret; + +/* EOF */ +} Added: trunk/fcoe-client/src/fcoe-client_proposal.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/src/fcoe-client_proposal.ycp?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/src/fcoe-client_proposal.ycp (added) +++ trunk/fcoe-client/src/fcoe-client_proposal.ycp Tue Apr 19 13:00:01 2011 @@ -0,0 +1,106 @@ +/* ------------------------------------------------------------------------------ + * Copyright (c) 2006 Novell, Inc. All Rights Reserved. + * + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of version 2 of the GNU General Public License as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, contact Novell, Inc. + * + * To contact Novell about this file by physical or electronic mail, you may find + * current contact information at www.novell.com. + * ------------------------------------------------------------------------------ + */ + +/** + * File: clients/fcoe-client_proposal.ycp + * Package: Configuration of fcoe-client + * Summary: Proposal function dispatcher. + * Authors: Gabriele Mohr + * + * + * Proposal function dispatcher for fcoe-client configuration. + * See source/installation/proposal/proposal-API.txt + */ + +{ + +textdomain "fcoe-client"; + +import "FcoeClient"; +import "Progress"; + +/* The main () */ +y2milestone("----------------------------------------"); +y2milestone("FcoeClient proposal started"); + +string func = (string) WFM::Args(0); +map param = (map) WFM::Args(1); +map ret = $[]; + +/* create a textual proposal */ +if(func == "MakeProposal") { + string proposal = ""; + string warning = nil; + symbol warning_level = nil; + boolean force_reset = param["force_reset"]:false; + + if(force_reset || !FcoeClient::ProposalValid()) { + FcoeClient::SetProposalValid (true); + boolean progress_orig = Progress::set (false); + FcoeClient::Read(); + Progress::set (progress_orig); + } + list sum = FcoeClient::Summary(); + proposal = sum[0]:""; + + ret = $[ + "preformatted_proposal" : proposal, + "warning_level" : warning_level, + "warning" : warning, + ]; +} +/* run the module */ +else if(func == "AskUser") { + map stored = FcoeClient::Export(); + symbol seq = (symbol) WFM::CallFunction("fcoe-client", [.propose]); + if(seq != `next) FcoeClient::Import(stored); + y2debug("stored=%1",stored); + y2debug("seq=%1",seq); + ret = $[ + "workflow_sequence" : seq + ]; +} +/* create titles */ +else if(func == "Description") { + ret = $[ + /* Rich text title for FcoeClient in proposals */ + "rich_text_title" : _("FcoeClient"), + /* Menu title for FcoeClient in proposals */ + "menu_title" : _("&FcoeClient"), + "id" : "fcoe-client", + ]; +} +/* write the proposal */ +else if(func == "Write") { + FcoeClient::Write(); +} +/* unknown function */ +else { + y2error("unknown function: %1", func); +} + +/* Finish */ +y2debug("ret=%1",ret); +y2milestone("FcoeClient proposal finished"); +y2milestone("----------------------------------------"); +return ret; + +/* EOF */ +} Added: trunk/fcoe-client/src/helps.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/src/helps.ycp?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/src/helps.ycp (added) +++ trunk/fcoe-client/src/helps.ycp Tue Apr 19 13:00:01 2011 @@ -0,0 +1,118 @@ +/* ------------------------------------------------------------------------------ + * Copyright (c) 2006 Novell, Inc. All Rights Reserved. + * + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of version 2 of the GNU General Public License as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, contact Novell, Inc. + * + * To contact Novell about this file by physical or electronic mail, you may find + * current contact information at www.novell.com. + * ------------------------------------------------------------------------------ + */ + +/** + * File: include/fcoe-client/helps.ycp + * Package: Configuration of fcoe-client + * Summary: Help texts of all the dialogs + * Authors: Gabriele Mohr + * + */ + +{ + +textdomain "fcoe-client"; + +/** + * All helps are here + */ +map HELPS = $[ + + /* Read dialog help 1/2 */ + "read" : _("<p><b><big>Initializing fcoe-client Configuration</big></b><br> +Please wait...<br></p> +") + + + /* Read dialog help 2/2 */ + _("<p><b><big>Aborting Initialization:</big></b><br> +Safely abort the configuration utility by pressing <b>Abort</b> now.</p> +"), + + /* Write dialog help 1/2 */ + "write" : _("<p><b><big>Saving fcoe-client Configuration</big></b><br> +Please wait...<br></p> +") + + + /* Write dialog help 2/2 */ +_("<p><b><big>Aborting Saving:</big></b><br> +Abort the save procedure by pressing <b>Abort</b>. +An additional dialog informs whether it is safe to do so. +</p> +"), + + /* Summary dialog help 1/3 */ + "summary" : _("<p><b><big>FcoeClient Configuration</big></b><br> +Configure fcoe-client here.<br></p> +") + + + /* Summary dialog help 2/3 */ + _("<p><b><big>Adding a fcoe-client:</big></b><br> +Choose an fcoe-client from the list of detected fcoe-clients. +If your fcoe-client was not detected, use <b>Other (not detected)</b>. +Then press <b>Configure</b>.</p> +") + + + /* Summary dialog help 3/3 */ + _("<p><b><big>Editing or Deleting:</big></b><br> +If you press <b>Edit</b>, an additional dialog in which to change +the configuration opens.</p> +"), + + /* Ovreview dialog help 1/3 */ + "overview" : _("<p><b><big>FcoeClient Configuration Overview</big></b><br> +Obtain an overview of installed fcoe-clients. Additionally +edit their configurations.<br></p> +") + + + /* Ovreview dialog help 2/3 */ +_("<p><b><big>Adding a fcoe-client:</big></b><br> +Press <b>Add</b> to configure a fcoe-client.</p>") + + + /* Ovreview dialog help 3/3 */ +_("<p><b><big>Editing or Deleting:</big></b><br> +Choose a fcoe-client to change or remove. +Then press <b>Edit</b> or <b>Delete</b> as desired.</p> +"), + + /* Configure1 dialog help 1/2 */ + "c1" : _("<p><b><big>Configuration Part One</big></b><br> +Press <b>Next</b> to continue. +<br></p>") + + + /* Configure1 dialog help 2/2 */ +_("<p><b><big>Selecting Something</big></b><br> +It is not possible. You must code it first. :-) +</p>"), + + /* Configure2 dialog help 1/2 */ + "c2" : _("<p><b><big>Configuration Part Two</big></b><br> +Press <b>Next</b> to continue. +<br></p> +") + + + /* Configure2 dialog help 2/2 */ +_("<p><b><big>Selecting Something</big></b><br> +It is not possible. You must code it first. :-) +</p>"), + +]; + +/* EOF */ +} Added: trunk/fcoe-client/src/wizards.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/src/wizards.ycp?rev=63827&view=auto ============================================================================== --- trunk/fcoe-client/src/wizards.ycp (added) +++ trunk/fcoe-client/src/wizards.ycp Tue Apr 19 13:00:01 2011 @@ -0,0 +1,226 @@ +/* ------------------------------------------------------------------------------ + * Copyright (c) 2006 Novell, Inc. All Rights Reserved. + * + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of version 2 of the GNU General Public License as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, contact Novell, Inc. + * + * To contact Novell about this file by physical or electronic mail, you may find + * current contact information at www.novell.com. + * ------------------------------------------------------------------------------ + */ + +/** + * File: include/fcoe-client/wizards.ycp + * Package: Configuration of fcoe-client + * Summary: Wizards definitions + * Authors: Gabriele Mohr + * + */ + +{ + + textdomain "fcoe-client"; + + import "Sequencer"; + import "Wizard"; + import "CWM"; + import "CWMTab"; + import "CWMServiceStart"; + + include "fcoe-client/complex.ycp"; + include "fcoe-client/dialogs.ycp"; + + +/** + * Main workflow of the fcoe-client configuration + * @return sequence result + */ + +any GlobalDialog() { + + map > widgets = + $[ + "serv" : $[ + "widget" : `custom, + "help" : HELPS["services"]:"", + "custom_widget" : ServicesDialogContent(), + "handle" : HandleServicesDialog, + "init" : InitServicesDialog, + "store" : StoreServicesDialog, + ], + "inter" : $[ + "widget" : `custom, + "help" : HELPS["interfaces"]:"", + "custom_widget" : InterfacesDialogContent(), + "handle" : HandleInterfacesDialog, + "init" : InitInterfacesDialog, + "store" : StoreInterfacesDialog, + ], + "config" : $[ + "widget" : `custom, + "help" : HELPS["configuration"]:"", + "custom_widget" : ConfigurationDialogContent(), + "init" : InitConfigurationDialog, + "handle" : HandleConfigurationDialog, + "store" : StoreConfigurationDialog, + ], + ]; + map tabs = + $[ + "services" : $[ + // Header of tab in tab widget + "header" : _("&Services"), + "widget_names" : ["serv"], + "contents" : ServicesDialogContent(), + ], + "interfaces" : $[ + // Header of tab in tab widget + "header" : _("&Interfaces"), + "widget_names" : ["inter"], + "contents" : InterfacesDialogContent(), + ], + "configuration" : $[ + // Header of tab in tab widget + "header" : _("&Configuration"), + "widget_names" : ["config"], + "contents" : ConfigurationDialogContent(), + ], + ]; + + string ini_tab = ""; + + if ( true ) // TODO: check lldpad / fcoemon running + ini_tab = "interfaces"; + else + ini_tab = "services"; + + map wd = + $[ + "tab" : CWMTab::CreateWidget ( + $[ + "tab_order" : ["services", "interfaces", "configuration"], + "tabs" : tabs, + "widget_descr" : widgets, + "initial_tab" : ini_tab, + ]) + ]; + + term contents = `VBox("tab"); + + list