See <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/4/display/redirect?page=changes> Changes: [shundhammer] Don't leak passwords to the log (bsc#1225432) [shundhammer] Version bump and change log ------------------------------------------ [...truncated 104,61 KiB...] [ 110s] first sets discovery authentication and later restores the initial config [ 110s] with bi-directional discovery authentication [ 110s] sets bi-directional discovery authentication and later restores the initial config [ 110s] #ScanDiscovered for iscsiadm -m session -P 1 [ 110s] with Current Portal: and Persistent Portal: differ [ 110s] returns list of connected targets with IPs of Persistent Portal [ 110s] #ScanDiscovered for iscsiadm -m node -P 1 [ 110s] with Portal: [ 110s] returns list of discovered targets with IPs of Portal [ 110s] #getiBFT [ 110s] when filtering output of 'iscsiadm -m fw' [ 110s] returns data in form of a map [ 110s] when could not get list of targets from firmware [ 110s] returns an empty map [ 110s] when not on x86 hardware [ 110s] returns an empty map [ 110s] #iscsiuio_relevant? [ 110s] there are no cards in the system supporting offloading [ 110s] returns false [ 110s] there are cards in the system supporting offloading [ 110s] but none of them use the bnx2i or qedi modules [ 110s] returns false [ 110s] and one of them uses de bnx2i module [ 110s] returns true [ 110s] and one of them uses de qedi module [ 110s] returns true [ 110s] and there are cards using both bnx2i and qedi modules [ 110s] returns true [ 110s] .GetOffloadItems [ 110s] with no network cards in the system [ 110s] returns an array of UI items [ 110s] provides 'default' as the only item [ 110s] with network cards not expected to support offloading [ 110s] returns an array of UI items [ 110s] provides 'default' as the only item [ 110s] with several network cards that could support offloading [ 110s] if none of the cards support offloading [ 110s] returns an array of UI items [ 110s] includes only 'default' and 'all' [ 110s] if some cards indeed support offloading [ 110s] returns an array of UI items [ 110s] includes 'default', 'all' and an entry for each offload card [ 110s] and ifconfig is not found [ 110s] sets the IPs in @offload_valid to 'unknown' [ 110s] and ifconfig is found [ 110s] sets the IPs in @offload_valid to 'unknown' [ 110s] and no active card is reported by iscsiadm [ 110s] pre-selects the item 'default' [ 110s] and one card is already associated to the first target [ 110s] selects by default the current offload card [ 110s] .connected [ 110s] if check_ip is true [ 110s] returns true if address, port, target name and interface match with a session [ 110s] returns false if only address, target name and interface match with a session [ 110s] returns false if only port, target name and interface match with a session [ 110s] returns false if only address, port and interface match with a session [ 110s] returns false if only address, port and target name match with a session [ 110s] if check_ip is false [ 110s] returns true if address, port, target name and interface match with a session [ 110s] returns true if only address, target name and interface match with a session [ 110s] returns true if only port, target name and interface match with a session [ 110s] returns false if only address, port and interface match with a session [ 110s] returns false if only address, port and target name match with a session [ 110s] .removeRecord [ 110s] if iscsiadm exit code is 0 [ 110s] returns true [ 110s] if iscsiadm exit code is different from 0 [ 110s] returns true [ 110s] [ 110s] Finished in 3.35 seconds (files took 0.65591 seconds to load) [ 110s] 102 examples, 0 failures [ 110s] [ 110s] + exit 0 [ 110s] Processing files: yast2-iscsi-client-4.6.2-1.noarch [ 110s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.SC27UG [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd yast2-iscsi-client-4.6.2 [ 110s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/yast2-iscsi-client-4.6.2-1.x86_64/usr/share/licenses/yast2-iscsi-client [ 110s] + export LC_ALL=C [ 110s] + LC_ALL=C [ 110s] + export LICENSEDIR [ 110s] + /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/yast2-iscsi-client-4.6.2-1.x86_64/usr/share/licenses/yast2-iscsi-client [ 110s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/yast2-iscsi-client-4.6.2-1.x86_64/usr/share/licenses/yast2-iscsi-client [ 110s] + exit 0 [ 111s] Provides: application() application(YaST2/org.opensuse.yast.iSCSIClient.desktop) metainfo() metainfo(org.opensuse.yast.iSCSIClient.metainfo.xml) yast2-iscsi-client = 4.6.2-1 [ 111s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 111s] Supplements: autoyast(iscsi-client) [ 111s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/yast2-iscsi-client-4.6.2-1.x86_64 [ 111s] Wrote: /home/abuild/rpmbuild/SRPMS/yast2-iscsi-client-4.6.2-1.src.rpm [ 111s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/yast2-iscsi-client-4.6.2-1.noarch.rpm [ 111s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.RqXKEp [ 111s] + umask 022 [ 111s] + cd /home/abuild/rpmbuild/BUILD [ 111s] + cd yast2-iscsi-client-4.6.2 [ 111s] + /usr/bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/yast2-iscsi-client-4.6.2-1.x86_64 [ 111s] + exit 0 [ 111s] ... checking for files with abuild user/group [ 111s] ... running 00-check-install-rpms [ 111s] ... installing all built rpms [ 111s] Preparing packages... [ 111s] yast2-iscsi-client-4.6.2-1.noarch [ 111s] ... running 50-check-binary-kernel-log [ 111s] ... running 50-check-core-files [ 111s] ... running 50-check-debuginfo [ 111s] ... testing for empty debuginfo packages [ 111s] ... running 50-check-filelist [ 111s] ... checking filelist [ 111s] ... running 50-check-gconf-scriptlets [ 111s] ... testing GConf scriptlet presence [ 111s] ... running 50-check-installtest [ 111s] ... testing for pre/postinstall scripts that are not idempotent [ 111s] ... running 50-check-invalid-provides [ 111s] ... running 50-check-invalid-requires [ 111s] ... running 50-check-kernel-build-id [ 111s] ... running 50-check-lanana [ 111s] ... running 50-check-libtool-deps [ 111s] ... testing devel dependencies required by libtool .la files [ 111s] (can be skipped by "skip-check-libtool-deps" anywhere in spec) [ 111s] ... running 50-check-packaged-twice [ 111s] ... running 50-check-permissions [ 111s] ... testing for modified permissions [ 111s] ... running 72-translate-appdata [ 111s] ... running 80-check-malware-scan-clamav [ 112s] unpacking /.build.packages/SRPMS/yast2-iscsi-client-4.6.2-1.src.rpm [ 112s] unpacking /.build.packages/RPMS/noarch/yast2-iscsi-client-4.6.2-1.noarch.rpm [ 112s] clamscan -ir /usr/src/packages/BUILD/scan: [ 112s] LibClamAV Warning: ************************************************** [ 112s] LibClamAV Warning: *** The virus database is older than 7 days! *** [ 112s] LibClamAV Warning: *** Please update it as soon as possible. *** [ 112s] LibClamAV Warning: ************************************************** [ 129s] [ 129s] ----------- SCAN SUMMARY ----------- [ 129s] Known viruses: 8691864 [ 129s] Engine version: 0.103.11 [ 129s] Scanned directories: 30 [ 129s] Scanned files: 26 [ 129s] Infected files: 0 [ 129s] Data scanned: 0.86 MB [ 129s] Data read: 0.22 MB (ratio 3.93:1) [ 129s] Time: 17.307 sec (0 m 17 s) [ 129s] Start Date: 2024:05:28 14:27:25 [ 129s] End Date: 2024:05:28 14:27:42 [ 129s] clamav: negative malware scan result. [ 129s] test passed. [ 129s] ... running 98-revert-uname-hack [ 129s] ... running 99-check-remove-rpms [ 129s] ... removing all built rpms [ 129s] (order: reverse yast2-iscsi-client) [ 130s] [ 130s] RPMLINT report: [ 130s] =============== [ 130s] yast2-iscsi-client.noarch: W: desktopfile-without-binary /usr/share/applications/YaST2/org.opensuse.yast.iSCSIClient.desktop xdg-su [ 130s] the .desktop file is for a file not present in the package. You should check [ 130s] the requires or see if this is not a error [ 130s] [ 130s] yast2-iscsi-client.noarch: W: invalid-desktopfile /usr/share/applications/YaST2/org.opensuse.yast.iSCSIClient.desktop file contains key "SuSE-YaST-Keywords" in group "Desktop Entry", but keys extending the format should start with "X-" [ 130s] .desktop file is not valid, check with desktop-file-validate [ 130s] [ 130s] yast2-iscsi-client.noarch: W: standard-dir-owned-by-package /usr/share/icons [ 130s] This package owns a directory that is part of the standard hierarchy, which [ 130s] can lead to default directory permissions or ownerships being changed to [ 130s] something non-standard. [ 130s] [ 130s] 2 packages and 0 specfiles checked; 0 errors, 3 warnings. [ 130s] [ 130s] [ 130s] vm-yast-ci-worker2 finished "build yast2-iscsi-client.spec" at Tue May 28 14:27:43 UTC 2024. [ 130s] /var/tmp/build-root/SUSE_SLE-15-SP6_GA-x86_64/home/abuild/rpmbuild/SRPMS/yast2-iscsi-client-4.6.2-1.src.rpm /var/tmp/build-root/SUSE_SLE-15-SP6_GA-x86_64/home/abuild/rpmbuild/RPMS/noarch/yast2-iscsi-client-4.6.2-1.noarch.rpm rm -rf Devel:YaST:SLE-15-SP6 osc -A 'https://api.suse.de/' --traceback checkout 'Devel:YaST:SLE-15-SP6' yast2-iscsi-client cleaning A Devel:YaST:SLE-15-SP6 A Devel:YaST:SLE-15-SP6/yast2-iscsi-client A Devel:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client-4.6.1.tar.bz2 A Devel:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client.changes A Devel:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client.spec At revision 3. /usr/lib/obs/service/format_spec_file --outdir . diff -u package/yast2-iscsi-client.changes <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client.changes rm <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client.changes rm <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client.spec rm <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client-4.6.1.tar.bz2 cp package/yast2-iscsi-client.changes <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-iscsi-client cp package/yast2-iscsi-client.spec <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-iscsi-client cp package/yast2-iscsi-client-4.6.2.tar.bz2 <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-iscsi-client osc -A 'https://api.suse.de/' addremove --- package/yast2-iscsi-client.changes 2024-05-28 14:25:16.826674905 +0000 +++ <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client.changes 2023-09-20 08:56:44.000000000 +0000 @@ -1,10 +1,4 @@ ------------------------------------------------------------------- -Tue May 28 13:05:18 UTC 2024 - Stefan Hundhammer <shundhammer@suse.com> - -- Don't leak passwords to the log (bsc#1225432) -- 4.6.2 - -------------------------------------------------------------------- Tue Sep 19 14:01:12 UTC 2023 - Stefan Hundhammer <shundhammer@suse.com> - Add support packages on demand (bsc#1214273) A yast2-iscsi-client-4.6.2.tar.bz2 D yast2-iscsi-client-4.6.1.tar.bz2 submitting package... osc -A https://api.suse.de/ commit -m - Don't leak passwords to the log (bsc#1225432) - 4.6.2 Deleting yast2-iscsi-client-4.6.1.tar.bz2 Sending yast2-iscsi-client.changes Sending yast2-iscsi-client.spec Sending yast2-iscsi-client-4.6.2.tar.bz2 Transmitting file data ... Committed revision 4. rm -rf Devel:YaST:SLE-15-SP6 osc -A 'https://api.suse.de/' --traceback checkout 'Devel:YaST:SLE-15-SP6' yast2-iscsi-client New package submitted to Devel:YaST:SLE-15-SP6 cleaning A Devel:YaST:SLE-15-SP6 A Devel:YaST:SLE-15-SP6/yast2-iscsi-client A Devel:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client-4.6.2.tar.bz2 A Devel:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client.changes A Devel:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client.spec At revision 4. osc -A 'https://api.suse.de/' cat 'SUSE:SLE-15-SP6:GA' 'yast2-iscsi-client' 'yast2-iscsi-client.spec' > /tmp/yast-rake20240528-23845-1l77ana osc -A https://api.suse.de/ service wait Devel:YaST:SLE-15-SP6 yast2-iscsi-client Version has been changed in *.spec file Waiting for the server side service... ok yes | osc -A 'https://api.suse.de/' submitreq --no-cleanup 'Devel:YaST:SLE-15-SP6' 'yast2-iscsi-client' 'SUSE:SLE-15-SP6:GA' -m 'submit new version 4.6.2' --yes Server returned an error: HTTP Error 403: Forbidden The target project SUSE:SLE-15-SP6:GA is not accepting requests because: Project is locked. Please use maintenance request for source changes and use osc requestbugownership to set bugowner of a package. rm -rf Devel:YaST:SLE-15-SP6 rake aborted! Command failed with status (1): [yes | osc -A 'https://api.suse.de/' submit...] Tasks: TOP => osc:sr (See full trace by running task with --trace) cleaning Result: PID 23842 exited with value 1 Scanning for a pull request... Found pull request #130 Adding comment ":x: Internal Jenkins [job #4](https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/4/) failed" to pull request https://github.com/yast/yast-iscsi-client/pull/130 Sending Net::HTTP::Post request to https://api.github.com/repos/yast/yast-iscsi-client/issues/130/comments... OK Success Build step 'Execute shell' marked build as failure Not sending mail to unregistered user shundhammer@suse.de