Hi, This bug seems to be beating me 6 love. I have a LCD 17' which should run at 1280x1024 @60hz. Choosing this option in Sax2.. does help. at this stage.. if I choose that option in sax2.. it runs X at 1600x1200 :/ now.. I must run the lcd at 60hz because it doesnt look good (waves on the screen) when running at 75hz. I have now even altered my xorg.conf for vsync = 60 - 60 and the only resolutions availible is 1280x1024... but no. it still chooses to run at 75hz. The lcd's specs are: Max res: 1280x1024@75 Recommended: 1280x1024@60 Horiz sync: 30-80 Vert sync: 60-75 Display area: 337x270 Bandwith: 135mhz The fx card is Nvidia 6200TC. Anyone any suggestions? Snippet from my current X config: ******************************** Section "Monitor" # DisplaySize 337 270 HorizSync 30-80 Identifier "Monitor[0]" ModelName "Unknown" Option "DPMS" VendorName "Unknown" VertRefresh 60-60 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" EndSubSection SubSection "Display" Depth 32 Modes "1280x1024" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Device" BoardName "GeForce 6200 TurboCache(TM)" BusID "5:0:0" Driver "nvidia" Identifier "Device[0]" Option "XaaNoOffScreenPixmaps" "on" Option "XaaNoPixmapCache" "on" VendorName "NVidia" EndSection ******************************** Snippet from previous sax2 config: ******************************** Section "Monitor" DisplaySize 337 270 HorizSync 30-80 Identifier "Monitor[0]" ModelName "Unknown" Option "DPMS" VendorName "Unknown" VertRefresh 60-75 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "800x600" 40.19 800 832 912 1024 600 601 604 623 Modeline "768x576" 37.37 768 800 880 992 576 577 580 598 Modeline "640x480" 29.84 640 664 728 816 480 481 484 501 Modeline "640x480" 25.10 640 656 720 800 480 481 484 498 Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Device" BoardName "GeForce 6200 TurboCache(TM)" BusID "5:0:0" Driver "nvidia" Identifier "Device[0]" Option "XaaNoOffScreenPixmaps" "on" Option "XaaNoPixmapCache" "on" VendorName "NVidia" EndSection Thanks! Pieter
* P Botha <bothapn@lantic.net> [01-05-06 17:18]:
This bug seems to be beating me 6 love. I have a LCD 17' which should run at 1280x1024 @60hz. Choosing this option in Sax2.. does help. at this stage.. if I choose that option in sax2.. it runs X at 1600x1200 :/ now.. I must run the lcd at 60hz because it doesnt look good (waves on the screen) when running at 75hz. I have now even altered my xorg.conf for vsync = 60 - 60 and the only resolutions availible is 1280x1024... but no. it still chooses to run at 75hz. The lcd's specs are: Max res: 1280x1024@75 Recommended: 1280x1024@60 Horiz sync: 30-80 Vert sync: 60-75 Display area: 337x270 Bandwith: 135mhz
What does the wondoz XXXX.inf install disk for your monitor say? Mine, NEC-LCD1912 says: HKR,"MODES\1280,1024",Mode1,,"31.0-84.0,56.0-75.0,+,+" so I substitute: Horiz sync: 31.0 - 84.0 Vert sync: 56.0 - 75.0 DisplaySize 380 300 Option "DMPS" -- Patrick Shanahan Registered Linux User #207535 http://wahoo.no-ip.org @ http://counter.li.org HOG # US1244711 Photo Album: http://wahoo.no-ip.org/gallery2
On Friday 06 January 2006 02:04, Patrick Shanahan wrote:
- P Botha <bothapn@lantic.net> [01-05-06 17:18]:
This bug seems to be beating me 6 love. I have a LCD 17' which should run at 1280x1024 @60hz. Choosing this option in Sax2.. does help. at this stage.. if I choose that option in sax2.. it runs X at 1600x1200 :/ now.. I must run the lcd at 60hz because it doesnt look good (waves on the screen) when running at 75hz. I have now even altered my xorg.conf for vsync = 60 - 60 and the only resolutions availible is 1280x1024... but no. it still chooses to run at 75hz. The lcd's specs are: Max res: 1280x1024@75 Recommended: 1280x1024@60 Horiz sync: 30-80 Vert sync: 60-75 Display area: 337x270 Bandwith: 135mhz
What does the wondoz XXXX.inf install disk for your monitor say?
Mine, NEC-LCD1912 says: HKR,"MODES\1280,1024",Mode1,,"31.0-84.0,56.0-75.0,+,+"
so I substitute: Horiz sync: 31.0 - 84.0 Vert sync: 56.0 - 75.0 DisplaySize 380 300 Option "DMPS"
-- Patrick Shanahan Registered Linux User #207535 http://wahoo.no-ip.org @ http://counter.li.org HOG # US1244711 Photo Album: http://wahoo.no-ip.org/gallery2
I do not have a install disk for wandoze. The screen just works there at 60hz.
participants (2)
-
P Botha -
Patrick Shanahan