Hallo Stefan, Op dinsdag 22-01-2008 om 18:15 uur [tijdzone +0100], schreef Stefan Dirsch:
Use radeonrandr12 driver. Just run "sax2 -r -m 0=radeonrandr12" for configuration.
Thanks for the hint, I wouldn't have found this out by myself. :-) In any case, it works better now, but not perfect yet. The external monitor is now in 1680x1050 just like I want it. But the LVDS display is now in 1024x768 instead of its native resolution 1400x1050. The GNOME top panel takes on the 1024 pixel width, leaving a lot of empty space on the external monitor. Worse, when I close the laptop lid, the external monitor is turned off as well. xrandr output: reinout@reinout:~> xrandr Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 1680 x 1200 VGA-0 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 60.0*+ 59.9 59.0 57.9 1280x1024 75.0 75.0 70.0 65.0 74.0 59.9 60.0 1152x864 75.0 74.8 70.0 65.0 73.9 60.0 1024x768 75.0 75.1 70.0 65.0 73.7 60.0 60.0 800x600 75.0 75.0 70.0 73.7 65.0 60.3 60.0 640x480 75.0 60.0 720x400 70.1 LVDS connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0* 800x600 60.3 640x480 59.9 S-video disconnected (normal left inverted right x axis y axis) 1024x768_60 (0x73) 64.1MHz h: width 1024 start 1080 end 1184 total 1344 skew 0 clock 47.7KHz v: height 768 start 769 end 772 total 795 clock 60.0Hz Any advice? thanks, -- Reinout van Schouwen http://vanschouwen.info/ -- To unsubscribe, e-mail: opensuse-xorg+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-xorg+help@opensuse.org