Is there any option to override the wrong (EDID ?) data for panel size given by that display so that I can use the 1600x1200 resolution with the nv driver : [...] (II) NV(0): I2C bus "DDC" initialized. (II) NV(0): Probing for analog device on output A... (--) NV(0): ...found one (II) NV(0): Probing for analog device on output B... (--) NV(0): ...can't find one (II) NV(0): Probing for EDID on I2C bus A... (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) NV(0): I2C device "DDC:ddc2" removed. (II) NV(0): ... none found (II) NV(0): Probing for EDID on I2C bus B... (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) NV(0): I2C device "DDC:ddc2" removed. (--) NV(0): DDC detected a DFP: (II) NV(0): Manufacturer: IME Model: 5653 Serial#: 808465204 (II) NV(0): Year: 2002 Week: 45 (II) NV(0): EDID Version: 1.3 (II) NV(0): Digital Display Input (II) NV(0): DFP 1.x compatible TMDS (II) NV(0): Max H-Image Size [cm]: horiz.: 41 vert.: 31 (II) NV(0): Gamma: 1.00 (II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) NV(0): First detailed timing is preferred mode (II) NV(0): redX: 0.647 redY: 0.346 greenX: 0.298 greenY: 0.591 (II) NV(0): blueX: 0.150 blueY: 0.118 whiteX: 0.313 whiteY: 0.329 (II) NV(0): Supported VESA Video Modes: (II) NV(0): 720x400@70Hz (II) NV(0): 640x480@60Hz (II) NV(0): 640x480@67Hz (II) NV(0): 640x480@72Hz (II) NV(0): 640x480@75Hz (II) NV(0): 800x600@56Hz (II) NV(0): 800x600@60Hz (II) NV(0): 800x600@72Hz (II) NV(0): 800x600@75Hz (II) NV(0): 832x624@75Hz (II) NV(0): 1024x768@60Hz (II) NV(0): 1024x768@70Hz (II) NV(0): 1024x768@75Hz (II) NV(0): 1280x1024@75Hz (II) NV(0): Manufacturer's mask: 0 (II) NV(0): Supported Future Video Modes: (II) NV(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) NV(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) NV(0): #2: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) NV(0): #3: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) NV(0): #4: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) NV(0): #5: hsize: 1280 vsize 1024 refresh: 85 vid: 39297 (II) NV(0): Supported additional Video Mode: (II) NV(0): clock: 162.0 MHz Image Size: 408 x 306 mm (II) NV(0): h_active: 1600 h_sync: 1600 h_sync_end 1792 h_blank_end 2160 h_border: 0 (II) NV(0): v_active: 1200 v_sync: 1200 v_sync_end 1203 v_blanking: 1250 v_border: 0 (II) NV(0): Ranges: V min: 56 V max: 85 Hz, H min: 31 H max: 92 kHz, PixClock max 170 MHz (II) NV(0): Serial No: ALFFSA3300034 (II) NV(0): Monitor name: L20CM (II) NV(0): EDID (in hex): (II) NV(0): 00ffffffffffff0025a5535634333030 (II) NV(0): 2d0c010381291fffeae595a5584c9726 (II) NV(0): 1e5054bfef008180a940315945596159 (II) NV(0): 819901010101483f403062b0324000c0 (II) NV(0): 030098321100001e000000fd0038551f (II) NV(0): 5c11000a202020202020000000ff0041 (II) NV(0): 4c4646534133333030303334000000fc (II) NV(0): 004c3230434d0a2020202020202000bf (--) NV(0): CRTC 0 is currently programmed for DFP (II) NV(0): Using DFP on CRTC 0 (--) NV(0): Panel size is 1280 x 1024 (II) NV(0): Using hsync ranges from config file (II) NV(0): Using vrefresh ranges from config file (II) NV(0): Printing DDC gathered Modelines: (II) NV(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (II) NV(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (II) NV(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (II) NV(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (II) NV(0): Modeline "640x480" 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (II) NV(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (II) NV(0): Modeline "720x400" 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (II) NV(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (II) NV(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (II) NV(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (II) NV(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (II) NV(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (II) NV(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (II) NV(0): Modeline "1280x1024" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (II) NV(0): Modeline "1600x1200" 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (II) NV(0): Modeline "640x480" 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (II) NV(0): Modeline "800x600" 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (II) NV(0): Modeline "1024x768" 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (II) NV(0): Modeline "1280x1024" 159.50 1280 1376 1512 1744 1024 1027 1034 1078 -hsync +vsync (II) NV(0): Modeline "1600x1200" 162.00 1600 1600 1792 2160 1200 1200 1203 1250 +hsync +vsync (II) NV(0): Panel is TMDS (--) NV(0): VideoRAM: 262144 kBytes (==) NV(0): Using gamma correction (1.0, 1.0, 1.0) (II) NV(0): Monitor[0]: Using hsync range of 30.00-92.00 kHz (II) NV(0): Monitor[0]: Using vrefresh range of 43.00-85.00 Hz (II) NV(0): Clock range: 12.00 to 400.00 MHz (II) NV(0): Not using mode "1600x1200" (exceeds panel dimensions) (II) NV(0): Not using mode "1600x1200" (exceeds panel dimensions) (II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) [...] -- To unsubscribe, e-mail: opensuse-xorg+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-xorg+help@opensuse.org