[opensuse-virtual] xen vm can't autoboot because of bridge hasn't been set up.
Hi Guys: I found an issue that xen vm can't autoboot because of bridge hasn't set up, i can manually boot the vm . maybe a bug? junwork:/etc/libvirt/qemu # chkconfig -A --list | grep xen Note: This output shows SysV services only and does not include native systemd services. SysV configuration data might be overridden by native systemd configuration. xen-watchdog 0:off 1:off 2:off 3:off 4:off 5:off 6:off xencommons 0:off 1:off 2:on 3:on 4:off 5:on 6:off xend 0:off 1:off 2:off 3:on 4:off 5:on 6:off xendomains 0:off 1:off 2:off 3:on 4:off 5:on 6:off junwork:~ # rcxend status redirecting to systemctl xend.service - LSB: Starts and stops the Xen management daemon Loaded: loaded (/etc/init.d/xend) Active: active (running) since Fri, 04 Jan 2013 06:41:11 +0800; 1h 14min ago Process: 659 ExecStart=/etc/init.d/xend start (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/xend.service ├ 737 /usr/bin/python /usr/sbin/xend start ├ 738 blktapctrl └ 740 /usr/bin/python /usr/sbin/xend start Jan 04 06:41:11 junwork xend[659]: Starting xend ..done junwork:/etc/libvirt/qemu # rcxendomains status redirecting to systemctl xendomains.service - LSB: Starts and stops Xen VMs Loaded: loaded (/etc/init.d/xendomains) Active: failed (Result: exit-code) since Fri, 04 Jan 2013 06:41:31 +0800; 1h 20min ago Process: 1323 ExecStart=/etc/init.d/xendomains start (code=exited, status=1/FAILURE) CGroup: name=systemd:/system/xendomains.service Jan 04 06:41:11 junwork xendomains[1323]: Restoring saved Xen domains Jan 04 06:41:29 junwork xendomains[1323]: windowsxp: ..failed Jan 04 06:41:29 junwork xendomains[1323]: Starting auto Xen domains Jan 04 06:41:31 junwork xendomains[1323]: config_winxp: Error: Device 0 (vif) could not be connected. Could not find ...ce br0 Jan 04 06:41:31 junwork xendomains[1323]: ..failed junwork:/etc/libvirt/qemu # ifconfig br0 Link encap:Ethernet HWaddr 00:1F:16:25:AA:66 inet addr:192.168.5.20 Bcast:192.168.5.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) eth0 Link encap:Ethernet HWaddr 00:1F:16:25:AA:66 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:20 Memory:f2600000-f2620000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1212 (1.1 Kb) TX bytes:1212 (1.1 Kb) wlan0 Link encap:Ethernet HWaddr 00:1E:65:6E:90:AE inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:65ff:fe6e:90ae/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6695 errors:0 dropped:0 overruns:0 frame:0 TX packets:5897 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3861362 (3.6 Mb) TX bytes:1266239 (1.2 Mb) junwork:/etc/xen/auto # cat config_winxp name="windowsxp" description="ip_192.168.10.55" uuid="d090b5fe-c5e2-e8fd-6720-a49d5debb94c" memory=512 maxmem=512 vcpus=2 on_poweroff="destroy" on_reboot="restart" on_crash="destroy" localtime=1 keymap="en-us" builder="hvm" device_model="/usr/lib/xen/bin/qemu-dm" kernel="/usr/lib/xen/boot/hvmloader" boot="c" disk=[ 'file:/xendisk/xen_vms/winxp/winxp.img,hda,w', ] vif=[ 'mac=00:16:3e:63:af:b9,bridge=br0,model=rtl8139', # 'mac=00:16:3e:13:63:2b,bridge=br1,model=rtl8139', ] ##ip=192.168.5.221 stdvga=0 vnc=1 vncunused=1 extid=0 usb=1 acpi=1 pae=1 usbdevice='tablet' serial="pty" -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-virtual+owner@opensuse.org
Jun Hu wrote:
Hi Guys:
I found an issue that xen vm can't autoboot because of bridge hasn't set up, i can manually boot the vm .
maybe a bug?
Seems the xendomains script should require the network to be active. Does adding '$network' to 'Required-Start' and 'Required-Stop' help? Regards, Jim
junwork:/etc/libvirt/qemu # chkconfig -A --list | grep xen
Note: This output shows SysV services only and does not include native systemd services. SysV configuration data might be overridden by native systemd configuration.
xen-watchdog 0:off 1:off 2:off 3:off 4:off 5:off 6:off xencommons 0:off 1:off 2:on 3:on 4:off 5:on 6:off xend 0:off 1:off 2:off 3:on 4:off 5:on 6:off xendomains 0:off 1:off 2:off 3:on 4:off 5:on 6:off
junwork:~ # rcxend status redirecting to systemctl xend.service - LSB: Starts and stops the Xen management daemon Loaded: loaded (/etc/init.d/xend) Active: active (running) since Fri, 04 Jan 2013 06:41:11 +0800; 1h 14min ago Process: 659 ExecStart=/etc/init.d/xend start (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/xend.service ├ 737 /usr/bin/python /usr/sbin/xend start ├ 738 blktapctrl └ 740 /usr/bin/python /usr/sbin/xend start
Jan 04 06:41:11 junwork xend[659]: Starting xend ..done
junwork:/etc/libvirt/qemu # rcxendomains status redirecting to systemctl xendomains.service - LSB: Starts and stops Xen VMs Loaded: loaded (/etc/init.d/xendomains) Active: failed (Result: exit-code) since Fri, 04 Jan 2013 06:41:31 +0800; 1h 20min ago Process: 1323 ExecStart=/etc/init.d/xendomains start (code=exited, status=1/FAILURE) CGroup: name=systemd:/system/xendomains.service
Jan 04 06:41:11 junwork xendomains[1323]: Restoring saved Xen domains Jan 04 06:41:29 junwork xendomains[1323]: windowsxp: ..failed Jan 04 06:41:29 junwork xendomains[1323]: Starting auto Xen domains Jan 04 06:41:31 junwork xendomains[1323]: config_winxp: Error: Device 0 (vif) could not be connected. Could not find ...ce br0 Jan 04 06:41:31 junwork xendomains[1323]: ..failed
junwork:/etc/libvirt/qemu # ifconfig br0 Link encap:Ethernet HWaddr 00:1F:16:25:AA:66 inet addr:192.168.5.20 Bcast:192.168.5.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth0 Link encap:Ethernet HWaddr 00:1F:16:25:AA:66 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:20 Memory:f2600000-f2620000
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1212 (1.1 Kb) TX bytes:1212 (1.1 Kb)
wlan0 Link encap:Ethernet HWaddr 00:1E:65:6E:90:AE inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:65ff:fe6e:90ae/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6695 errors:0 dropped:0 overruns:0 frame:0 TX packets:5897 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3861362 (3.6 Mb) TX bytes:1266239 (1.2 Mb)
junwork:/etc/xen/auto # cat config_winxp name="windowsxp" description="ip_192.168.10.55" uuid="d090b5fe-c5e2-e8fd-6720-a49d5debb94c" memory=512 maxmem=512 vcpus=2 on_poweroff="destroy" on_reboot="restart" on_crash="destroy" localtime=1 keymap="en-us"
builder="hvm" device_model="/usr/lib/xen/bin/qemu-dm" kernel="/usr/lib/xen/boot/hvmloader" boot="c" disk=[ 'file:/xendisk/xen_vms/winxp/winxp.img,hda,w',
] vif=[ 'mac=00:16:3e:63:af:b9,bridge=br0,model=rtl8139', # 'mac=00:16:3e:13:63:2b,bridge=br1,model=rtl8139', ] ##ip=192.168.5.221
stdvga=0 vnc=1 vncunused=1 extid=0 usb=1 acpi=1 pae=1
usbdevice='tablet'
serial="pty"
-- To unsubscribe, e-mail: opensuse-virtual+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-virtual+owner@opensuse.org
1.though xendomains scripts 'Required-Start' has no '$network" but xendomanis depend xend , we can see /etc/init.d/.depend.start : network-remotefs: network ntp: network-remotefs syslog xend:nt p xendomains: xend so , apparently , there is no problem about dependency relationship. 2. after I add '$network" in 'Required-Start' line of xendomains scripts, run insserv xendomains reboot , but found the issue exists still. 3. on opensuse, it use systemd instead of sysvinit , I think cause may be there. On Thu, 2013-01-03 at 18:09 -0700, Jim Fehlig wrote:
Jun Hu wrote:
Hi Guys:
I found an issue that xen vm can't autoboot because of bridge hasn't set up, i can manually boot the vm .
maybe a bug?
Seems the xendomains script should require the network to be active. Does adding '$network' to 'Required-Start' and 'Required-Stop' help?
Regards, Jim
junwork:/etc/libvirt/qemu # chkconfig -A --list | grep xen
Note: This output shows SysV services only and does not include native systemd services. SysV configuration data might be overridden by native systemd configuration.
xen-watchdog 0:off 1:off 2:off 3:off 4:off 5:off 6:off xencommons 0:off 1:off 2:on 3:on 4:off 5:on 6:off xend 0:off 1:off 2:off 3:on 4:off 5:on 6:off xendomains 0:off 1:off 2:off 3:on 4:off 5:on 6:off
junwork:~ # rcxend status redirecting to systemctl xend.service - LSB: Starts and stops the Xen management daemon Loaded: loaded (/etc/init.d/xend) Active: active (running) since Fri, 04 Jan 2013 06:41:11 +0800; 1h 14min ago Process: 659 ExecStart=/etc/init.d/xend start (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/xend.service ├ 737 /usr/bin/python /usr/sbin/xend start ├ 738 blktapctrl └ 740 /usr/bin/python /usr/sbin/xend start
Jan 04 06:41:11 junwork xend[659]: Starting xend ..done
junwork:/etc/libvirt/qemu # rcxendomains status redirecting to systemctl xendomains.service - LSB: Starts and stops Xen VMs Loaded: loaded (/etc/init.d/xendomains) Active: failed (Result: exit-code) since Fri, 04 Jan 2013 06:41:31 +0800; 1h 20min ago Process: 1323 ExecStart=/etc/init.d/xendomains start (code=exited, status=1/FAILURE) CGroup: name=systemd:/system/xendomains.service
Jan 04 06:41:11 junwork xendomains[1323]: Restoring saved Xen domains Jan 04 06:41:29 junwork xendomains[1323]: windowsxp: ..failed Jan 04 06:41:29 junwork xendomains[1323]: Starting auto Xen domains Jan 04 06:41:31 junwork xendomains[1323]: config_winxp: Error: Device 0 (vif) could not be connected. Could not find ...ce br0 Jan 04 06:41:31 junwork xendomains[1323]: ..failed
junwork:/etc/libvirt/qemu # ifconfig br0 Link encap:Ethernet HWaddr 00:1F:16:25:AA:66 inet addr:192.168.5.20 Bcast:192.168.5.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth0 Link encap:Ethernet HWaddr 00:1F:16:25:AA:66 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:20 Memory:f2600000-f2620000
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1212 (1.1 Kb) TX bytes:1212 (1.1 Kb)
wlan0 Link encap:Ethernet HWaddr 00:1E:65:6E:90:AE inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:65ff:fe6e:90ae/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6695 errors:0 dropped:0 overruns:0 frame:0 TX packets:5897 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3861362 (3.6 Mb) TX bytes:1266239 (1.2 Mb)
junwork:/etc/xen/auto # cat config_winxp name="windowsxp" description="ip_192.168.10.55" uuid="d090b5fe-c5e2-e8fd-6720-a49d5debb94c" memory=512 maxmem=512 vcpus=2 on_poweroff="destroy" on_reboot="restart" on_crash="destroy" localtime=1 keymap="en-us"
builder="hvm" device_model="/usr/lib/xen/bin/qemu-dm" kernel="/usr/lib/xen/boot/hvmloader" boot="c" disk=[ 'file:/xendisk/xen_vms/winxp/winxp.img,hda,w',
] vif=[ 'mac=00:16:3e:63:af:b9,bridge=br0,model=rtl8139', # 'mac=00:16:3e:13:63:2b,bridge=br1,model=rtl8139', ] ##ip=192.168.5.221
stdvga=0 vnc=1 vncunused=1 extid=0 usb=1 acpi=1 pae=1
usbdevice='tablet'
serial="pty"
-- To unsubscribe, e-mail: opensuse-virtual+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-virtual+owner@opensuse.org
Jun Hu wrote:
1.though xendomains scripts 'Required-Start' has no '$network"
but xendomanis depend xend , we can see /etc/init.d/.depend.start :
network-remotefs: network ntp: network-remotefs syslog xend:nt p xendomains: xend
so , apparently , there is no problem about dependency relationship.
Right.
2. after I add '$network" in 'Required-Start' line of xendomains scripts, run insserv xendomains
reboot , but found the issue exists still.
Not surprising, given your point above.
3. on opensuse, it use systemd instead of sysvinit , I think cause may be there.
Agreed. IMO, you should file a bug against systemd. Proper systemd service files for the xen package would be nice too. Regards, Jim
On Thu, 2013-01-03 at 18:09 -0700, Jim Fehlig wrote:
Jun Hu wrote:
Hi Guys:
I found an issue that xen vm can't autoboot because of bridge hasn't set up, i can manually boot the vm .
maybe a bug?
Seems the xendomains script should require the network to be active. Does adding '$network' to 'Required-Start' and 'Required-Stop' help?
Regards, Jim
junwork:/etc/libvirt/qemu # chkconfig -A --list | grep xen
Note: This output shows SysV services only and does not include native systemd services. SysV configuration data might be overridden by native systemd configuration.
xen-watchdog 0:off 1:off 2:off 3:off 4:off 5:off 6:off xencommons 0:off 1:off 2:on 3:on 4:off 5:on 6:off xend 0:off 1:off 2:off 3:on 4:off 5:on 6:off xendomains 0:off 1:off 2:off 3:on 4:off 5:on 6:off
junwork:~ # rcxend status redirecting to systemctl xend.service - LSB: Starts and stops the Xen management daemon Loaded: loaded (/etc/init.d/xend) Active: active (running) since Fri, 04 Jan 2013 06:41:11 +0800; 1h 14min ago Process: 659 ExecStart=/etc/init.d/xend start (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/xend.service ├ 737 /usr/bin/python /usr/sbin/xend start ├ 738 blktapctrl └ 740 /usr/bin/python /usr/sbin/xend start
Jan 04 06:41:11 junwork xend[659]: Starting xend ..done
junwork:/etc/libvirt/qemu # rcxendomains status redirecting to systemctl xendomains.service - LSB: Starts and stops Xen VMs Loaded: loaded (/etc/init.d/xendomains) Active: failed (Result: exit-code) since Fri, 04 Jan 2013 06:41:31 +0800; 1h 20min ago Process: 1323 ExecStart=/etc/init.d/xendomains start (code=exited, status=1/FAILURE) CGroup: name=systemd:/system/xendomains.service
Jan 04 06:41:11 junwork xendomains[1323]: Restoring saved Xen domains Jan 04 06:41:29 junwork xendomains[1323]: windowsxp: ..failed Jan 04 06:41:29 junwork xendomains[1323]: Starting auto Xen domains Jan 04 06:41:31 junwork xendomains[1323]: config_winxp: Error: Device 0 (vif) could not be connected. Could not find ...ce br0 Jan 04 06:41:31 junwork xendomains[1323]: ..failed
junwork:/etc/libvirt/qemu # ifconfig br0 Link encap:Ethernet HWaddr 00:1F:16:25:AA:66 inet addr:192.168.5.20 Bcast:192.168.5.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth0 Link encap:Ethernet HWaddr 00:1F:16:25:AA:66 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:20 Memory:f2600000-f2620000
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1212 (1.1 Kb) TX bytes:1212 (1.1 Kb)
wlan0 Link encap:Ethernet HWaddr 00:1E:65:6E:90:AE inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:65ff:fe6e:90ae/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6695 errors:0 dropped:0 overruns:0 frame:0 TX packets:5897 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3861362 (3.6 Mb) TX bytes:1266239 (1.2 Mb)
junwork:/etc/xen/auto # cat config_winxp name="windowsxp" description="ip_192.168.10.55" uuid="d090b5fe-c5e2-e8fd-6720-a49d5debb94c" memory=512 maxmem=512 vcpus=2 on_poweroff="destroy" on_reboot="restart" on_crash="destroy" localtime=1 keymap="en-us"
builder="hvm" device_model="/usr/lib/xen/bin/qemu-dm" kernel="/usr/lib/xen/boot/hvmloader" boot="c" disk=[ 'file:/xendisk/xen_vms/winxp/winxp.img,hda,w',
] vif=[ 'mac=00:16:3e:63:af:b9,bridge=br0,model=rtl8139', # 'mac=00:16:3e:13:63:2b,bridge=br1,model=rtl8139', ] ##ip=192.168.5.221
stdvga=0 vnc=1 vncunused=1 extid=0 usb=1 acpi=1 pae=1
usbdevice='tablet'
serial="pty"
-- To unsubscribe, e-mail: opensuse-virtual+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-virtual+owner@opensuse.org
participants (2)
-
Jim Fehlig -
Jun Hu