Tony Su wrote:
Depends on how you configured your "interface." The following command should display its details
brctl show vig10
Well, 'vif10' is created automagically when I run 'xl create'. # brctl show vif10 bridge name bridge id STP enabled interfaces vif10 can't get info Operation not supported The bridge device 'xenbr1': # brctl show xenbr1 bridge name bridge id STP enabled interfaces xenbr1 8000.0018fefc3ff2 no eth1 vif10 vif15.0
You should also describe how you created your interface...
standard openSUSE network config: # cat /etc/sysconfig/network/ifcfg-xenbr1 BOOTPROTO='static' BRIDGE='yes' BRIDGE_FORWARDDELAY='0' BRIDGE_PORTS='eth1' BRIDGE_STP='off' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='' MTU='' NAME='' NETMASK='' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' -- Per Jessen, Zürich (0.0°C) http://www.hostsuisse.com/ - dedicated server rental in Switzerland. -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-virtual+owner@opensuse.org