2011/8/28 Hans Witvliet <suse@a-domani.nl>:
Hi all,
In order to create a -more or less- representative test configuration, I tried to copy a real life situation into a xen-set-up: -external firewal (kc3040) -openvpn server (kc3072) -Internal firewall (kc3041) -management gateway (kc3075) -asterisk pabx -mysql server
To simulate different networks, I created dummy ethernet devices, and connected bridges to it. All of the four bridges are working OK, except ONE: BR2 and also only from one virtual machine: openvpn/kc3072
If i ping on the vpn-box (vpn is not setup yet) towards internal firewall i see no traffic at all ( 172.16.100.1 => 172.16.100.2 ) Even if i do an tcpdump on the bridge-device from DOM-0, i dont see anything.
On the otherhand, if i do a ping the otherway round (int-fw towards vpn) i see the icmp-request on the bridge device (but no repy, hence the problem)
Looked at [internal] firewall, at the bridges, routing, but i'm clue-less…. Tried to move the whole configuration towards a different DOM-0, with the same result, rebuild the vpn-dom-U: still no show All firewall's are down.
All boxes are suse: both firewals are open_11.4, mgnt+vpn are sles11sp1 and dom0 is also sles, but tried also with open.
Tried the lists at xen, but the only replies were questions what i used to make the drawing ;-)
Any suggestion where to look next?
did you try "ethtool - K eth0 tx off" [1] Hope the helps. Thanks, Todd [1] http://xen.markmail.org/search/?q=xen+ethtool+-K+eth0+tx+checksum+off#query:... -- Todd Deshane http://www.linkedin.com/in/deshantm http://www.xen.org/products/cloudxen.html http://runningxen.com/ -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-virtual+help@opensuse.org