Hi, Thanks for all the info, worked as expected. I have modified the channels of the client to use 15.2, and on the client "zypper dup" worked without any issue. Can this upgrade be done on the Uyuni Server + Proxies (2020.05) with no risk ? Regards, Philippe. Philippe Bidault | Unix Engineer Getronics M. 34617301667 | E. Philippe.Bidault@Getronics.com | W. www.getronics.com Getronics CMC Service Desk Iberia S.L -  VAT No:S.L.: B66686262. Registered Office - Getronics CMC Service Desk Iberia S.L, C/Rosselloi, Porcel, 21 planta 11, 08016 Barcelona, Spain.   The information transmitted is intended only for use by the addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material.  Thank you. Legal disclaimer: http://www.getronics.com/legal/ -----Original Message----- From: Michael Calmer Sent: martes, 7 de julio de 2020 9:19 To: uyuni-users@opensuse.org Subject: Re: [uyuni-users] Upgrade registered Uyuni client from 15.1 to 15.2 CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. Hi when you added openSUSE 15 (1 and 2) using spacewalk-common-channel you have "custom" channels. With custom channels, no version check is performed any you can free change the channels using the web ui. But we do not have a UI to perform a "dup" (distupgrade) which would be the right thing to call. You can call it directly on the client or use remote command for this. But there is a 3rd option. We have an XMLRPC API which let you define channels and call the zypper dup command system.scheduleDistUpgrade Check the API docs. Just for completeness: In case you have access to SCC and added openSUSE using the Product page, the channels were added as "Vendor Channels". Here we perform version checks on the product and you cannot just change the channel. Here the "SP Migration" page can be used. It will offer you the migration path and you can do it via UI. Only in this case system.scheduleSPMigration() API can be used. Am Montag, 6. Juli 2020, 17:39:49 CEST schrieb Julio González Gil:

On lunes, 6 de julio de 2020 17:34:09 (CEST) Bidault, Philippe wrote:

...

Hi all,

I have seen documentation were the zypper repo file needs to be modified by hand to upgrade from Leap 15.1 to 15.2, and was now wondering, how the upgrade could be done on a registered Uyuni client ? Just by modifying the registered repo from the Uyuni web console does the trick ?

I think that should, work if after changing the repositories you run an update on the client... as long as you don't have third party repositories.

If you have them, maybe you will get vendor changes, and I am not sure Uyuni is going to handle them automatically (which is not bad: in the end in this case you should know what to do, and worst case you can use a remote command to allow unconditionall vendor change if needed).

...

Regards, Philippe.

Philippe Bidault | Unix Engineer

Getronics ________________________________ M. 34617301667 | E. Philippe.Bidault@Getronics.com | W. www.getronics.com

[cid:M17520GetronicsConnectingPossibilitiesE-Sig425x204_e1803ca0-99a 5-4a65-a bd8-074c86bf11aa.png]http://www.getronics.com/ http://www.linkedin.com/company/2077785[cid:LinkedIn_4aeb630a-f385 -4f22-9 27e-31323d2554b8.png]https://www.linkedin.com/company/2077785 [cid:Twitter_6c9cce61-b2e3-49d4-991c-e799d031f1ae.png] https://twitter.com/Getronics http://twitter.com/Getronics [cid:Youtube_5150f807-4ba8-46a3-bbbf-038ccfdc2793.png] https://www.youtube.com/user/getronicsonline?feature=results_main http://www.youtube.com/user/getronicsonline?feature=results_main sign-info

<http://www.getronics.com/knowledge-share/news-and-events/ovum.php#s thash.cb KPq4wA.bnvveIrq.dpbs>

Getronics CMC Service Desk Iberia S.L - VAT No:S.L.: B66686262. Registered Office - Getronics CMC Service Desk Iberia S.L, C/Rosselloi, Porcel, 21 planta 11, 08016 Barcelona, Spain.

The information transmitted is intended only for use by the addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material. Thank you. Legal disclaimer: http://www.getronics.com/legal/

-- Regards Michael Calmer -------------------------------------------------------------------------- Michael Calmer SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, D-90409 Nuernberg T: +49 (0) 911 74053 0 F: +49 (0) 911 74053575 - e-mail: Michael.Calmer@suse.com -------------------------------------------------------------------------- SUSE Software Solutions Germany GmbH, GF: Felix Imendörffer (HRB 36809, AG Nürnberg) -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org

Understood, thanks for the info. Philippe. Philippe Bidault | Unix Engineer Getronics M. 34617301667 | E. Philippe.Bidault@Getronics.com | W. www.getronics.com Getronics CMC Service Desk Iberia S.L -  VAT No:S.L.: B66686262. Registered Office - Getronics CMC Service Desk Iberia S.L, C/Rosselloi, Porcel, 21 planta 11, 08016 Barcelona, Spain.   The information transmitted is intended only for use by the addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material.  Thank you. Legal disclaimer: http://www.getronics.com/legal/ -----Original Message----- From: Julio González Gil Sent: miércoles, 8 de julio de 2020 9:39 To: uyuni-users@opensuse.org Cc: Bidault, Philippe ; Michael Calmer Subject: Re: [uyuni-users] Upgrade registered Uyuni client from 15.1 to 15.2 Hi, Server and Proxies are based on Leap 15.1 for now and must not be updated. 2020.07 will support Leap 15.2 as base OS for Server and Proxy. On martes, 7 de julio de 2020 21:58:33 (CEST) Bidault, Philippe wrote:

Hi,

Thanks for all the info, worked as expected. I have modified the channels of the client to use 15.2, and on the client "zypper dup" worked without any issue.

Can this upgrade be done on the Uyuni Server + Proxies (2020.05) with no risk ?

Regards, Philippe.

Philippe Bidault | Unix Engineer Getronics M. 34617301667 | E. Philippe.Bidault@Getronics.com | W. www.getronics.com

Getronics CMC Service Desk Iberia S.L - VAT No:S.L.: B66686262. Registered Office - Getronics CMC Service Desk Iberia S.L, C/Rosselloi, Porcel, 21 planta 11, 08016 Barcelona, Spain. The information transmitted is intended only for use by the addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material. Thank you.

Legal disclaimer: http://www.getronics.com/legal/ -----Original Message----- From: Michael Calmer Sent: martes, 7 de julio de 2020 9:19 To: uyuni-users@opensuse.org Subject: Re: [uyuni-users] Upgrade registered Uyuni client from 15.1 to 15.2

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Hi

when you added openSUSE 15 (1 and 2) using spacewalk-common-channel you have "custom" channels. With custom channels, no version check is performed any you can free change the channels using the web ui. But we do not have a UI to perform a "dup" (distupgrade) which would be the right thing to call. You can call it directly on the client or use remote command for this. But there is a 3rd option. We have an XMLRPC API which let you define channels and call the zypper dup command system.scheduleDistUpgrade

Check the API docs.

Just for completeness: In case you have access to SCC and added openSUSE using the Product page, the channels were added as "Vendor Channels". Here we perform version checks on the product and you cannot just change the channel. Here the "SP Migration" page can be used. It will offer you the migration path and you can do it via UI. Only in this case system.scheduleSPMigration() API can be used.

Am Montag, 6. Juli 2020, 17:39:49 CEST schrieb Julio González Gil:

...

On lunes, 6 de julio de 2020 17:34:09 (CEST) Bidault, Philippe wrote:

...

Hi all,

I have seen documentation were the zypper repo file needs to be modified by hand to upgrade from Leap 15.1 to 15.2, and was now wondering, how the upgrade could be done on a registered Uyuni client ? Just by modifying the registered repo from the Uyuni web console does the trick ?

...

I think that should, work if after changing the repositories you run an update on the client... as long as you don't have third party repositories.

...

If you have them, maybe you will get vendor changes, and I am not sure Uyuni is going to handle them automatically (which is not bad: in the end in this case you should know what to do, and worst case you can use a remote command to allow unconditionall vendor change if needed).

...

Regards, Philippe.

Philippe Bidault | Unix Engineer

Getronics ________________________________ M. 34617301667 | E. Philippe.Bidault@Getronics.com | W. www.getronics.com

[cid:M17520GetronicsConnectingPossibilitiesE-Sig425x204_e1803ca0-9 9a 5-4a65-a bd8-074c86bf11aa.png]http://www.getronics.com/ http://www.linkedin.com/company/2077785[cid:LinkedIn_4aeb630a-f3 85 -4f22-9 27e-31323d2554b8.png]https://www.linkedin.com/company/2077785 [cid:Twitter_6c9cce61-b2e3-49d4-991c-e799d031f1ae.png] https://twitter.com/Getronics http://twitter.com/Getronics [cid:Youtube_5150f807-4ba8-46a3-bbbf-038ccfdc2793.png] <https://www.youtube.com/user/getronicsonline?feature=results_main

...

http://www.youtube.com/user/getronicsonline?feature=results_main sign-info

<http://www.getronics.com/knowledge-share/news-and-events/ovum.php #s thash.cb KPq4wA.bnvveIrq.dpbs>

Getronics CMC Service Desk Iberia S.L - VAT No:S.L.: B66686262. Registered Office - Getronics CMC Service Desk Iberia S.L, C/Rosselloi, Porcel, 21 planta 11, 08016 Barcelona, Spain.

The information transmitted is intended only for use by the addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material. Thank you. Legal disclaimer: http://www.getronics.com/legal/

-- Regards

Michael Calmer

---------------------------------------------------------------------- ---- Michael Calmer SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, D-90409 Nuernberg T: +49 (0) 911 74053 0 F: +49 (0) 911 74053575 - e-mail: Michael.Calmer@suse.com ---------------------------------------------------------------------- ---- SUSE Software Solutions Germany GmbH, GF: Felix Imendörffer (HRB 36809, AG Nürnberg)

-- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org

 칻 & zf 쮞+ z > {.n + Ǩ  r i m 0 ޙ +  Ϩ w 

-- Julio González Gil Release Engineer, SUSE Manager and Uyuni jgonzalez@suse.com