SIM/smart card reader
I've bought a generic USB-based SIM/smart card reader to see if I can read a SIM. It came without any useful instructions or software. I have no idea about the infrastructure of such software/hardware on linux. I've discovered and installed pcsc-lite and pcsc-ccid and pcsc-tools When I plug in the reader, it's reported in the journal: Jun 24 16:46:32 acer-suse kernel: usb 3-9.4.4.4: new full-speed USB device number 12 using xhci_hcd Jun 24 16:46:32 acer-suse mtp-probe[2189]: checking bus 3, device 12: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.4/3-9.4.4.4" Jun 24 16:46:32 acer-suse kernel: usb 3-9.4.4.4: New USB device found, idVendor=2ce3, idProduct=9563 Jun 24 16:46:32 acer-suse kernel: usb 3-9.4.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jun 24 16:46:32 acer-suse kernel: usb 3-9.4.4.4: Product: EMV Smartcard Reader Jun 24 16:46:32 acer-suse kernel: usb 3-9.4.4.4: Manufacturer: Generic Jun 24 16:46:32 acer-suse mtp-probe[2189]: bus: 3, device: 12 was not an MTP device pcscd is running but pcsc_scan just says Waiting for the first reader... Anybody know anything about these devices and can advise or point me to good documentation?
On 24.06.2022 18:55, Dave Howorth wrote:
I've bought a generic USB-based SIM/smart card reader to see if I can read a SIM. It came without any useful instructions or software. I have no idea about the infrastructure of such software/hardware on linux.
I've discovered and installed pcsc-lite and pcsc-ccid and pcsc-tools
Are you sure your reader supports CCID?
When I plug in the reader, it's reported in the journal:
Jun 24 16:46:32 acer-suse kernel: usb 3-9.4.4.4: new full-speed USB device number 12 using xhci_hcd Jun 24 16:46:32 acer-suse mtp-probe[2189]: checking bus 3, device 12: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.4/3-9.4.4.4" Jun 24 16:46:32 acer-suse kernel: usb 3-9.4.4.4: New USB device found, idVendor=2ce3, idProduct=9563 Jun 24 16:46:32 acer-suse kernel: usb 3-9.4.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jun 24 16:46:32 acer-suse kernel: usb 3-9.4.4.4: Product: EMV Smartcard Reader Jun 24 16:46:32 acer-suse kernel: usb 3-9.4.4.4: Manufacturer: Generic Jun 24 16:46:32 acer-suse mtp-probe[2189]: bus: 3, device: 12 was not an MTP device
pcscd is running but pcsc_scan just says
Waiting for the first reader...
Anybody know anything about these devices and can advise or point me to good documentation?
https://stackoverflow.com/questions/51517613/how-to-add-a-device-with-vid-pi...
W dniu 24.06.2022 o 17:55, Dave Howorth pisze:
I've bought a generic USB-based SIM/smart card reader to see if I can read a SIM. It came without any useful instructions or software. I have no idea about the infrastructure of such software/hardware on linux.
I've discovered and installed pcsc-lite and pcsc-ccid and pcsc-tools When I plug in the reader, it's reported in the journal:
Jun 24 16:46:32 acer-suse kernel: usb 3-9.4.4.4: new full-speed USB device number 12 using xhci_hcd Jun 24 16:46:32 acer-suse mtp-probe[2189]: checking bus 3, device 12: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.4/3-9.4.4.4" Jun 24 16:46:32 acer-suse kernel: usb 3-9.4.4.4: New USB device found, idVendor=2ce3, idProduct=9563 Jun 24 16:46:32 acer-suse kernel: usb 3-9.4.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jun 24 16:46:32 acer-suse kernel: usb 3-9.4.4.4: Product: EMV Smartcard Reader Jun 24 16:46:32 acer-suse kernel: usb 3-9.4.4.4: Manufacturer: Generic Jun 24 16:46:32 acer-suse mtp-probe[2189]: bus: 3, device: 12 was not an MTP device
pcscd is running but pcsc_scan just says
Waiting for the first reader...
Anybody know anything about these devices and can advise or point me to good documentation?
I guess you're out of luck here. https://stackoverflow.com/questions/51517613/how-to-add-a-device-with-vid-pi...
participants (3)
-
Adam Mizerski -
Andrei Borzenkov -
Dave Howorth