[opensuse] I/O-controller (Netmos) doesn't work after Update to opensuse 12.1
Hallo list, it seems really strange. I was glad upgrade from opensuse 11.3 to 12.1 worked fine. But after a reboot (without kernel change) my I/O card (1 parallel, 2 serial ports, NetMos) did not work anymore. Urgently needed for dialin and fax. It always worked with 2.6 kernels provided by openSuse dmesg: [ 25.476126] parport_pc 0000:06:04.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 25.476183] PCI parallel port detected: 1415:9513, I/O at 0xd800(0x0), IRQ 16 [ 25.476244] parport0: PC-style at 0xd800, irq 16 [PCSPP] [ 25.555792] parport0: Printer, Lexmark International Lexmark Optra E+ LaserPrinter [ 25.829251] parport_serial 0000:04:07.0: enabling device (9714 -> 9715) [ 25.829307] 0000:04:07.0: unknown NetMos/Mostech device [ 25.829307] Please send the output of lspci -vv, this [ 25.829308] message (0x9710,0x9835,0x0004,0x0000), the [ 25.829309] manufacturer and name of serial board or [ 25.829309] modem board to rmk+serial@arm.linux.org.uk. [ 25.863389] ppdev: user-space parallel port driver lspci -vv 04:07.0 Communication controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 6480 [disabled] [size=8] Region 1: I/O ports at 5000 [disabled] [size=4] Region 2: I/O ports at 6084 [disabled] [size=4] Region 3: I/O ports at 5004 [disabled] [size=4] Region 4: I/O ports at 5c04 [disabled] [size=4] Region 5: I/O ports at 5008 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00 04:07.1 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 500c [disabled] [size=4] Region 1: I/O ports at 5010 [disabled] [size=4] Region 2: I/O ports at 5014 [disabled] [size=4] Region 3: I/O ports at 5018 [disabled] [size=4] Region 4: I/O ports at 501c [disabled] [size=4] Region 5: I/O ports at 5020 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00 04:07.2 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 5024 [disabled] [size=4] Region 1: I/O ports at 5028 [disabled] [size=4] Region 2: I/O ports at 502c [disabled] [size=4] Region 3: I/O ports at 5030 [disabled] [size=4] Region 4: I/O ports at 5034 [disabled] [size=4] Region 5: I/O ports at 5038 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00 04:07.3 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 503c [disabled] [size=4] Region 1: I/O ports at 5040 [disabled] [size=4] Region 2: I/O ports at 5044 [disabled] [size=4] Region 3: I/O ports at 5048 [disabled] [size=4] Region 4: I/O ports at 504c [disabled] [size=4] Region 5: I/O ports at 5050 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00 04:07.4 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 5054 [disabled] [size=4] Region 1: I/O ports at 5058 [disabled] [size=4] Region 2: I/O ports at 505c [disabled] [size=4] Region 3: I/O ports at 5060 [disabled] [size=4] Region 4: I/O ports at 5064 [disabled] [size=4] Region 5: I/O ports at 5068 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00 04:07.5 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 506c [disabled] [size=4] Region 1: I/O ports at 5070 [disabled] [size=4] Region 2: I/O ports at 5074 [disabled] [size=4] Region 3: I/O ports at 5078 [disabled] [size=4] Region 4: I/O ports at 507c [disabled] [size=4] Region 5: I/O ports at 5080 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00 04:07.6 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 5084 [disabled] [size=4] Region 1: I/O ports at 5088 [disabled] [size=4] Region 2: I/O ports at 508c [disabled] [size=4] Region 3: I/O ports at 5090 [disabled] [size=4] Region 4: I/O ports at 5094 [disabled] [size=4] Region 5: I/O ports at 5098 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00 04:07.7 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 509c [disabled] [size=4] Region 1: I/O ports at 50a0 [disabled] [size=4] Region 2: I/O ports at 50a4 [disabled] [size=4] Region 3: I/O ports at 50a8 [disabled] [size=4] Region 4: I/O ports at 50ac [disabled] [size=4] Region 5: I/O ports at 50b0 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00 I just found this on the head of dmesg: [ 0.554302] pci 0000:04:07.0: BAR 1: assigned [io 0x5000-0x5003] [ 0.554341] pci 0000:04:07.0: BAR 1: error updating (0x005001 != 0x005005) [ 0.554379] pci 0000:04:07.0: BAR 1: set to [io 0x5000-0x5003] (PCI address [0x5000-0x5003]) [ 0.554430] pci 0000:04:07.0: BAR 3: assigned [io 0x5004-0x5007] [ 0.554469] pci 0000:04:07.0: BAR 3: set to [io 0x5004-0x5007] (PCI address [0x5004-0x5007]) [ 0.554519] pci 0000:04:07.0: BAR 5: assigned [io 0x5008-0x500b] [ 0.554559] pci 0000:04:07.0: BAR 5: error updating (0x005009 != 0x00500d) [ 0.554598] pci 0000:04:07.0: BAR 5: set to [io 0x5008-0x500b] (PCI address [0x5008-0x500b]) [ 0.554647] pci 0000:04:07.1: BAR 0: assigned [io 0x500c-0x500f] [ 0.554687] pci 0000:04:07.1: BAR 0: error updating (0x00500d != 0x005009) [ 0.554725] pci 0000:04:07.1: BAR 0: set to [io 0x500c-0x500f] (PCI address [0x500c-0x500f]) [ 0.554775] pci 0000:04:07.1: BAR 1: assigned [io 0x5010-0x5013] [ 0.554815] pci 0000:04:07.1: BAR 1: error updating (0x005011 != 0x005015) [ 0.554853] pci 0000:04:07.1: BAR 1: set to [io 0x5010-0x5013] (PCI address [0x5010-0x5013]) [ 0.554903] pci 0000:04:07.1: BAR 2: assigned [io 0x5014-0x5017] [ 0.554943] pci 0000:04:07.1: BAR 2: error updating (0x005015 != 0x005011) [ 0.554981] pci 0000:04:07.1: BAR 2: set to [io 0x5014-0x5017] (PCI address [0x5014-0x5017]) [ 0.555037] pci 0000:04:07.1: BAR 3: assigned [io 0x5018-0x501b] [ 0.555076] pci 0000:04:07.1: BAR 3: error updating (0x005019 != 0x00501d) [ 0.555115] pci 0000:04:07.1: BAR 3: set to [io 0x5018-0x501b] (PCI address [0x5018-0x501b]) [ 0.555164] pci 0000:04:07.1: BAR 4: assigned [io 0x501c-0x501f] [ 0.555204] pci 0000:04:07.1: BAR 4: error updating (0x00501d != 0x005019) [ 0.555242] pci 0000:04:07.1: BAR 4: set to [io 0x501c-0x501f] (PCI address [0x501c-0x501f]) [ 0.555291] pci 0000:04:07.1: BAR 5: assigned [io 0x5020-0x5023] [ 0.555331] pci 0000:04:07.1: BAR 5: error updating (0x005021 != 0x005025) [ 0.555369] pci 0000:04:07.1: BAR 5: set to [io 0x5020-0x5023] (PCI address [0x5020-0x5023]) [ 0.555418] pci 0000:04:07.2: BAR 0: assigned [io 0x5024-0x5027] [ 0.555458] pci 0000:04:07.2: BAR 0: error updating (0x005025 != 0x005021) [ 0.555496] pci 0000:04:07.2: BAR 0: set to [io 0x5024-0x5027] (PCI address [0x5024-0x5027]) [ 0.555546] pci 0000:04:07.2: BAR 1: assigned [io 0x5028-0x502b] [ 0.555586] pci 0000:04:07.2: BAR 1: error updating (0x005029 != 0x00502d) [ 0.555624] pci 0000:04:07.2: BAR 1: set to [io 0x5028-0x502b] (PCI address [0x5028-0x502b]) [ 0.555674] pci 0000:04:07.2: BAR 2: assigned [io 0x502c-0x502f] [ 0.555713] pci 0000:04:07.2: BAR 2: error updating (0x00502d != 0x005029) [ 0.555752] pci 0000:04:07.2: BAR 2: set to [io 0x502c-0x502f] (PCI address [0x502c-0x502f]) [ 0.555801] pci 0000:04:07.2: BAR 3: assigned [io 0x5030-0x5033] [ 0.555841] pci 0000:04:07.2: BAR 3: error updating (0x005031 != 0x005035) [ 0.555879] pci 0000:04:07.2: BAR 3: set to [io 0x5030-0x5033] (PCI address [0x5030-0x5033]) [ 0.555929] pci 0000:04:07.2: BAR 4: assigned [io 0x5034-0x5037] [ 0.555968] pci 0000:04:07.2: BAR 4: error updating (0x005035 != 0x005031) [ 0.556012] pci 0000:04:07.2: BAR 4: set to [io 0x5034-0x5037] (PCI address [0x5034-0x5037]) [ 0.556062] pci 0000:04:07.2: BAR 5: assigned [io 0x5038-0x503b] [ 0.556102] pci 0000:04:07.2: BAR 5: error updating (0x005039 != 0x00503d) [ 0.556141] pci 0000:04:07.2: BAR 5: set to [io 0x5038-0x503b] (PCI address [0x5038-0x503b]) [ 0.556190] pci 0000:04:07.3: BAR 0: assigned [io 0x503c-0x503f] [ 0.556230] pci 0000:04:07.3: BAR 0: error updating (0x00503d != 0x005039) [ 0.556269] pci 0000:04:07.3: BAR 0: set to [io 0x503c-0x503f] (PCI address [0x503c-0x503f]) [ 0.556318] pci 0000:04:07.3: BAR 1: assigned [io 0x5040-0x5043] [ 0.556358] pci 0000:04:07.3: BAR 1: error updating (0x005041 != 0x005045) [ 0.556397] pci 0000:04:07.3: BAR 1: set to [io 0x5040-0x5043] (PCI address [0x5040-0x5043]) [ 0.556447] pci 0000:04:07.3: BAR 2: assigned [io 0x5044-0x5047] [ 0.556486] pci 0000:04:07.3: BAR 2: error updating (0x005045 != 0x005041) [ 0.556524] pci 0000:04:07.3: BAR 2: set to [io 0x5044-0x5047] (PCI address [0x5044-0x5047]) [ 0.556574] pci 0000:04:07.3: BAR 3: assigned [io 0x5048-0x504b] [ 0.556613] pci 0000:04:07.3: BAR 3: error updating (0x005049 != 0x00504d) [ 0.556651] pci 0000:04:07.3: BAR 3: set to [io 0x5048-0x504b] (PCI address [0x5048-0x504b]) [ 0.556700] pci 0000:04:07.3: BAR 4: assigned [io 0x504c-0x504f] [ 0.556740] pci 0000:04:07.3: BAR 4: error updating (0x00504d != 0x005049) [ 0.556778] pci 0000:04:07.3: BAR 4: set to [io 0x504c-0x504f] (PCI address [0x504c-0x504f]) [ 0.556827] pci 0000:04:07.3: BAR 5: assigned [io 0x5050-0x5053] [ 0.556867] pci 0000:04:07.3: BAR 5: error updating (0x005051 != 0x005055) [ 0.556905] pci 0000:04:07.3: BAR 5: set to [io 0x5050-0x5053] (PCI address [0x5050-0x5053]) [ 0.556954] pci 0000:04:07.4: BAR 0: assigned [io 0x5054-0x5057] [ 0.556994] pci 0000:04:07.4: BAR 0: error updating (0x005055 != 0x005051) [ 0.557038] pci 0000:04:07.4: BAR 0: set to [io 0x5054-0x5057] (PCI address [0x5054-0x5057]) [ 0.557087] pci 0000:04:07.4: BAR 1: assigned [io 0x5058-0x505b] [ 0.557127] pci 0000:04:07.4: BAR 1: error updating (0x005059 != 0x00505d) [ 0.557165] pci 0000:04:07.4: BAR 1: set to [io 0x5058-0x505b] (PCI address [0x5058-0x505b]) [ 0.557214] pci 0000:04:07.4: BAR 2: assigned [io 0x505c-0x505f] [ 0.557254] pci 0000:04:07.4: BAR 2: error updating (0x00505d != 0x005059) [ 0.557292] pci 0000:04:07.4: BAR 2: set to [io 0x505c-0x505f] (PCI address [0x505c-0x505f]) [ 0.557341] pci 0000:04:07.4: BAR 3: assigned [io 0x5060-0x5063] [ 0.557381] pci 0000:04:07.4: BAR 3: error updating (0x005061 != 0x005065) [ 0.557419] pci 0000:04:07.4: BAR 3: set to [io 0x5060-0x5063] (PCI address [0x5060-0x5063]) [ 0.557470] pci 0000:04:07.4: BAR 4: assigned [io 0x5064-0x5067] [ 0.557511] pci 0000:04:07.4: BAR 4: error updating (0x005065 != 0x005061) [ 0.557550] pci 0000:04:07.4: BAR 4: set to [io 0x5064-0x5067] (PCI address [0x5064-0x5067]) [ 0.557601] pci 0000:04:07.4: BAR 5: assigned [io 0x5068-0x506b] [ 0.557642] pci 0000:04:07.4: BAR 5: error updating (0x005069 != 0x00506d) [ 0.557680] pci 0000:04:07.4: BAR 5: set to [io 0x5068-0x506b] (PCI address [0x5068-0x506b]) [ 0.557731] pci 0000:04:07.5: BAR 0: assigned [io 0x506c-0x506f] [ 0.557771] pci 0000:04:07.5: BAR 0: error updating (0x00506d != 0x005069) [ 0.557810] pci 0000:04:07.5: BAR 0: set to [io 0x506c-0x506f] (PCI address [0x506c-0x506f]) [ 0.557862] pci 0000:04:07.5: BAR 1: assigned [io 0x5070-0x5073] [ 0.557903] pci 0000:04:07.5: BAR 1: error updating (0x005071 != 0x005075) [ 0.557941] pci 0000:04:07.5: BAR 1: set to [io 0x5070-0x5073] (PCI address [0x5070-0x5073]) [ 0.557992] pci 0000:04:07.5: BAR 2: assigned [io 0x5074-0x5077] [ 0.558039] pci 0000:04:07.5: BAR 2: error updating (0x005075 != 0x005071) [ 0.558078] pci 0000:04:07.5: BAR 2: set to [io 0x5074-0x5077] (PCI address [0x5074-0x5077]) [ 0.558129] pci 0000:04:07.5: BAR 3: assigned [io 0x5078-0x507b] [ 0.558171] pci 0000:04:07.5: BAR 3: error updating (0x005079 != 0x00507d) [ 0.558210] pci 0000:04:07.5: BAR 3: set to [io 0x5078-0x507b] (PCI address [0x5078-0x507b]) [ 0.558627] pci 0000:04:07.5: BAR 4: assigned [io 0x507c-0x507f] [ 0.558668] pci 0000:04:07.5: BAR 4: error updating (0x00507d != 0x005079) [ 0.558706] pci 0000:04:07.5: BAR 4: set to [io 0x507c-0x507f] (PCI address [0x507c-0x507f]) [ 0.558757] pci 0000:04:07.5: BAR 5: assigned [io 0x5080-0x5083] [ 0.558800] pci 0000:04:07.5: BAR 5: error updating (0x005081 != 0x005085) [ 0.558838] pci 0000:04:07.5: BAR 5: set to [io 0x5080-0x5083] (PCI address [0x5080-0x5083]) [ 0.558890] pci 0000:04:07.6: BAR 0: assigned [io 0x5084-0x5087] [ 0.558932] pci 0000:04:07.6: BAR 0: error updating (0x005085 != 0x005081) [ 0.558970] pci 0000:04:07.6: BAR 0: set to [io 0x5084-0x5087] (PCI address [0x5084-0x5087]) [ 0.559029] pci 0000:04:07.6: BAR 1: assigned [io 0x5088-0x508b] [ 0.559071] pci 0000:04:07.6: BAR 1: error updating (0x005089 != 0x00508d) [ 0.559110] pci 0000:04:07.6: BAR 1: set to [io 0x5088-0x508b] (PCI address [0x5088-0x508b]) [ 0.559162] pci 0000:04:07.6: BAR 2: assigned [io 0x508c-0x508f] [ 0.559203] pci 0000:04:07.6: BAR 2: error updating (0x00508d != 0x005089) [ 0.559242] pci 0000:04:07.6: BAR 2: set to [io 0x508c-0x508f] (PCI address [0x508c-0x508f]) [ 0.559294] pci 0000:04:07.6: BAR 3: assigned [io 0x5090-0x5093] [ 0.559335] pci 0000:04:07.6: BAR 3: error updating (0x005091 != 0x005095) [ 0.559374] pci 0000:04:07.6: BAR 3: set to [io 0x5090-0x5093] (PCI address [0x5090-0x5093]) [ 0.559426] pci 0000:04:07.6: BAR 4: assigned [io 0x5094-0x5097] [ 0.559466] pci 0000:04:07.6: BAR 4: error updating (0x005095 != 0x005091) [ 0.559504] pci 0000:04:07.6: BAR 4: set to [io 0x5094-0x5097] (PCI address [0x5094-0x5097]) [ 0.559555] pci 0000:04:07.6: BAR 5: assigned [io 0x5098-0x509b] [ 0.559594] pci 0000:04:07.6: BAR 5: error updating (0x005099 != 0x00509d) [ 0.559633] pci 0000:04:07.6: BAR 5: set to [io 0x5098-0x509b] (PCI address [0x5098-0x509b]) [ 0.559683] pci 0000:04:07.7: BAR 0: assigned [io 0x509c-0x509f] [ 0.559723] pci 0000:04:07.7: BAR 0: error updating (0x00509d != 0x005099) [ 0.559761] pci 0000:04:07.7: BAR 0: set to [io 0x509c-0x509f] (PCI address [0x509c-0x509f]) [ 0.559812] pci 0000:04:07.7: BAR 1: assigned [io 0x50a0-0x50a3] [ 0.559852] pci 0000:04:07.7: BAR 1: error updating (0x0050a1 != 0x0050a5) [ 0.559890] pci 0000:04:07.7: BAR 1: set to [io 0x50a0-0x50a3] (PCI address [0x50a0-0x50a3]) [ 0.559941] pci 0000:04:07.7: BAR 2: assigned [io 0x50a4-0x50a7] [ 0.559980] pci 0000:04:07.7: BAR 2: error updating (0x0050a5 != 0x0050a1) [ 0.560024] pci 0000:04:07.7: BAR 2: set to [io 0x50a4-0x50a7] (PCI address [0x50a4-0x50a7]) [ 0.560075] pci 0000:04:07.7: BAR 3: assigned [io 0x50a8-0x50ab] [ 0.560115] pci 0000:04:07.7: BAR 3: error updating (0x0050a9 != 0x0050ad) [ 0.560153] pci 0000:04:07.7: BAR 3: set to [io 0x50a8-0x50ab] (PCI address [0x50a8-0x50ab]) [ 0.560204] pci 0000:04:07.7: BAR 4: assigned [io 0x50ac-0x50af] [ 0.560244] pci 0000:04:07.7: BAR 4: error updating (0x0050ad != 0x0050a9) [ 0.560281] pci 0000:04:07.7: BAR 4: set to [io 0x50ac-0x50af] (PCI address [0x50ac-0x50af]) [ 0.560333] pci 0000:04:07.7: BAR 5: assigned [io 0x50b0-0x50b3] [ 0.560372] pci 0000:04:07.7: BAR 5: error updating (0x0050b1 != 0x0050b5) [ 0.560410] pci 0000:04:07.7: BAR 5: set to [io 0x50b0-0x50b3] (PCI address [0x50b0-0x50b3]) about the system: Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux alpha 3.1.9-1.4-desktop #1 SMP PREEMPT Fri Jan 27 08:55:10 UTC 2012 (efb5ff4) x86_64 Kernel command line: root=/dev/mapper/vg01-root resume=/dev/disk/by-id/ata-WDC_WD5002ABYS-02B1B0_WD-WCASY9667774-part3 showopts vga=normal Build Date: 10 November 2011 03:34:36PM Thanks a lot in advance. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On Feb 5 2012 19:38, Paul Neuwirth wrote: Problem solved: changed the pci slot. But how can that happen? I did not change the configuration, which worked for more than a year. Tried several kernel parameters, but could not solve the ressource conflict (address space collission).
Date: Sun, 5 Feb 2012 19:38:18 +0100 (CET) From: Paul Neuwirth <pane@paneologe.ch> To: opensuse@opensuse.org Subject: [opensuse] I/O-controller (Netmos) doesn't work after Update to opensuse 12.1
Hallo list, it seems really strange. I was glad upgrade from opensuse 11.3 to 12.1 worked fine. But after a reboot (without kernel change) my I/O card (1 parallel, 2 serial ports, NetMos) did not work anymore. Urgently needed for dialin and fax. It always worked with 2.6 kernels provided by openSuse
dmesg: [ 25.476126] parport_pc 0000:06:04.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 25.476183] PCI parallel port detected: 1415:9513, I/O at 0xd800(0x0), IRQ 16 [ 25.476244] parport0: PC-style at 0xd800, irq 16 [PCSPP] [ 25.555792] parport0: Printer, Lexmark International Lexmark Optra E+ LaserPrinter [ 25.829251] parport_serial 0000:04:07.0: enabling device (9714 -> 9715) [ 25.829307] 0000:04:07.0: unknown NetMos/Mostech device [ 25.829307] Please send the output of lspci -vv, this [ 25.829308] message (0x9710,0x9835,0x0004,0x0000), the [ 25.829309] manufacturer and name of serial board or [ 25.829309] modem board to rmk+serial@arm.linux.org.uk. [ 25.863389] ppdev: user-space parallel port driver
lspci -vv 04:07.0 Communication controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 6480 [disabled] [size=8] Region 1: I/O ports at 5000 [disabled] [size=4] Region 2: I/O ports at 6084 [disabled] [size=4] Region 3: I/O ports at 5004 [disabled] [size=4] Region 4: I/O ports at 5c04 [disabled] [size=4] Region 5: I/O ports at 5008 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00
04:07.1 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 500c [disabled] [size=4] Region 1: I/O ports at 5010 [disabled] [size=4] Region 2: I/O ports at 5014 [disabled] [size=4] Region 3: I/O ports at 5018 [disabled] [size=4] Region 4: I/O ports at 501c [disabled] [size=4] Region 5: I/O ports at 5020 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00
04:07.2 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 5024 [disabled] [size=4] Region 1: I/O ports at 5028 [disabled] [size=4] Region 2: I/O ports at 502c [disabled] [size=4] Region 3: I/O ports at 5030 [disabled] [size=4] Region 4: I/O ports at 5034 [disabled] [size=4] Region 5: I/O ports at 5038 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00
04:07.3 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 503c [disabled] [size=4] Region 1: I/O ports at 5040 [disabled] [size=4] Region 2: I/O ports at 5044 [disabled] [size=4] Region 3: I/O ports at 5048 [disabled] [size=4] Region 4: I/O ports at 504c [disabled] [size=4] Region 5: I/O ports at 5050 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00
04:07.4 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 5054 [disabled] [size=4] Region 1: I/O ports at 5058 [disabled] [size=4] Region 2: I/O ports at 505c [disabled] [size=4] Region 3: I/O ports at 5060 [disabled] [size=4] Region 4: I/O ports at 5064 [disabled] [size=4] Region 5: I/O ports at 5068 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00
04:07.5 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 506c [disabled] [size=4] Region 1: I/O ports at 5070 [disabled] [size=4] Region 2: I/O ports at 5074 [disabled] [size=4] Region 3: I/O ports at 5078 [disabled] [size=4] Region 4: I/O ports at 507c [disabled] [size=4] Region 5: I/O ports at 5080 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00
04:07.6 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 5084 [disabled] [size=4] Region 1: I/O ports at 5088 [disabled] [size=4] Region 2: I/O ports at 508c [disabled] [size=4] Region 3: I/O ports at 5090 [disabled] [size=4] Region 4: I/O ports at 5094 [disabled] [size=4] Region 5: I/O ports at 5098 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00
04:07.7 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 509c [disabled] [size=4] Region 1: I/O ports at 50a0 [disabled] [size=4] Region 2: I/O ports at 50a4 [disabled] [size=4] Region 3: I/O ports at 50a8 [disabled] [size=4] Region 4: I/O ports at 50ac [disabled] [size=4] Region 5: I/O ports at 50b0 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00
I just found this on the head of dmesg:
[ 0.554302] pci 0000:04:07.0: BAR 1: assigned [io 0x5000-0x5003] [ 0.554341] pci 0000:04:07.0: BAR 1: error updating (0x005001 != 0x005005) [ 0.554379] pci 0000:04:07.0: BAR 1: set to [io 0x5000-0x5003] (PCI address [0x5000-0x5003]) [ 0.554430] pci 0000:04:07.0: BAR 3: assigned [io 0x5004-0x5007] [ 0.554469] pci 0000:04:07.0: BAR 3: set to [io 0x5004-0x5007] (PCI address [0x5004-0x5007]) [ 0.554519] pci 0000:04:07.0: BAR 5: assigned [io 0x5008-0x500b] [ 0.554559] pci 0000:04:07.0: BAR 5: error updating (0x005009 != 0x00500d) [ 0.554598] pci 0000:04:07.0: BAR 5: set to [io 0x5008-0x500b] (PCI address [0x5008-0x500b]) [ 0.554647] pci 0000:04:07.1: BAR 0: assigned [io 0x500c-0x500f] [ 0.554687] pci 0000:04:07.1: BAR 0: error updating (0x00500d != 0x005009) [ 0.554725] pci 0000:04:07.1: BAR 0: set to [io 0x500c-0x500f] (PCI address [0x500c-0x500f]) [ 0.554775] pci 0000:04:07.1: BAR 1: assigned [io 0x5010-0x5013] [ 0.554815] pci 0000:04:07.1: BAR 1: error updating (0x005011 != 0x005015) [ 0.554853] pci 0000:04:07.1: BAR 1: set to [io 0x5010-0x5013] (PCI address [0x5010-0x5013]) [ 0.554903] pci 0000:04:07.1: BAR 2: assigned [io 0x5014-0x5017] [ 0.554943] pci 0000:04:07.1: BAR 2: error updating (0x005015 != 0x005011) [ 0.554981] pci 0000:04:07.1: BAR 2: set to [io 0x5014-0x5017] (PCI address [0x5014-0x5017]) [ 0.555037] pci 0000:04:07.1: BAR 3: assigned [io 0x5018-0x501b] [ 0.555076] pci 0000:04:07.1: BAR 3: error updating (0x005019 != 0x00501d) [ 0.555115] pci 0000:04:07.1: BAR 3: set to [io 0x5018-0x501b] (PCI address [0x5018-0x501b]) [ 0.555164] pci 0000:04:07.1: BAR 4: assigned [io 0x501c-0x501f] [ 0.555204] pci 0000:04:07.1: BAR 4: error updating (0x00501d != 0x005019) [ 0.555242] pci 0000:04:07.1: BAR 4: set to [io 0x501c-0x501f] (PCI address [0x501c-0x501f]) [ 0.555291] pci 0000:04:07.1: BAR 5: assigned [io 0x5020-0x5023] [ 0.555331] pci 0000:04:07.1: BAR 5: error updating (0x005021 != 0x005025) [ 0.555369] pci 0000:04:07.1: BAR 5: set to [io 0x5020-0x5023] (PCI address [0x5020-0x5023]) [ 0.555418] pci 0000:04:07.2: BAR 0: assigned [io 0x5024-0x5027] [ 0.555458] pci 0000:04:07.2: BAR 0: error updating (0x005025 != 0x005021) [ 0.555496] pci 0000:04:07.2: BAR 0: set to [io 0x5024-0x5027] (PCI address [0x5024-0x5027]) [ 0.555546] pci 0000:04:07.2: BAR 1: assigned [io 0x5028-0x502b] [ 0.555586] pci 0000:04:07.2: BAR 1: error updating (0x005029 != 0x00502d) [ 0.555624] pci 0000:04:07.2: BAR 1: set to [io 0x5028-0x502b] (PCI address [0x5028-0x502b]) [ 0.555674] pci 0000:04:07.2: BAR 2: assigned [io 0x502c-0x502f] [ 0.555713] pci 0000:04:07.2: BAR 2: error updating (0x00502d != 0x005029) [ 0.555752] pci 0000:04:07.2: BAR 2: set to [io 0x502c-0x502f] (PCI address [0x502c-0x502f]) [ 0.555801] pci 0000:04:07.2: BAR 3: assigned [io 0x5030-0x5033] [ 0.555841] pci 0000:04:07.2: BAR 3: error updating (0x005031 != 0x005035) [ 0.555879] pci 0000:04:07.2: BAR 3: set to [io 0x5030-0x5033] (PCI address [0x5030-0x5033]) [ 0.555929] pci 0000:04:07.2: BAR 4: assigned [io 0x5034-0x5037] [ 0.555968] pci 0000:04:07.2: BAR 4: error updating (0x005035 != 0x005031) [ 0.556012] pci 0000:04:07.2: BAR 4: set to [io 0x5034-0x5037] (PCI address [0x5034-0x5037]) [ 0.556062] pci 0000:04:07.2: BAR 5: assigned [io 0x5038-0x503b] [ 0.556102] pci 0000:04:07.2: BAR 5: error updating (0x005039 != 0x00503d) [ 0.556141] pci 0000:04:07.2: BAR 5: set to [io 0x5038-0x503b] (PCI address [0x5038-0x503b]) [ 0.556190] pci 0000:04:07.3: BAR 0: assigned [io 0x503c-0x503f] [ 0.556230] pci 0000:04:07.3: BAR 0: error updating (0x00503d != 0x005039) [ 0.556269] pci 0000:04:07.3: BAR 0: set to [io 0x503c-0x503f] (PCI address [0x503c-0x503f]) [ 0.556318] pci 0000:04:07.3: BAR 1: assigned [io 0x5040-0x5043] [ 0.556358] pci 0000:04:07.3: BAR 1: error updating (0x005041 != 0x005045) [ 0.556397] pci 0000:04:07.3: BAR 1: set to [io 0x5040-0x5043] (PCI address [0x5040-0x5043]) [ 0.556447] pci 0000:04:07.3: BAR 2: assigned [io 0x5044-0x5047] [ 0.556486] pci 0000:04:07.3: BAR 2: error updating (0x005045 != 0x005041) [ 0.556524] pci 0000:04:07.3: BAR 2: set to [io 0x5044-0x5047] (PCI address [0x5044-0x5047]) [ 0.556574] pci 0000:04:07.3: BAR 3: assigned [io 0x5048-0x504b] [ 0.556613] pci 0000:04:07.3: BAR 3: error updating (0x005049 != 0x00504d) [ 0.556651] pci 0000:04:07.3: BAR 3: set to [io 0x5048-0x504b] (PCI address [0x5048-0x504b]) [ 0.556700] pci 0000:04:07.3: BAR 4: assigned [io 0x504c-0x504f] [ 0.556740] pci 0000:04:07.3: BAR 4: error updating (0x00504d != 0x005049) [ 0.556778] pci 0000:04:07.3: BAR 4: set to [io 0x504c-0x504f] (PCI address [0x504c-0x504f]) [ 0.556827] pci 0000:04:07.3: BAR 5: assigned [io 0x5050-0x5053] [ 0.556867] pci 0000:04:07.3: BAR 5: error updating (0x005051 != 0x005055) [ 0.556905] pci 0000:04:07.3: BAR 5: set to [io 0x5050-0x5053] (PCI address [0x5050-0x5053]) [ 0.556954] pci 0000:04:07.4: BAR 0: assigned [io 0x5054-0x5057] [ 0.556994] pci 0000:04:07.4: BAR 0: error updating (0x005055 != 0x005051) [ 0.557038] pci 0000:04:07.4: BAR 0: set to [io 0x5054-0x5057] (PCI address [0x5054-0x5057]) [ 0.557087] pci 0000:04:07.4: BAR 1: assigned [io 0x5058-0x505b] [ 0.557127] pci 0000:04:07.4: BAR 1: error updating (0x005059 != 0x00505d) [ 0.557165] pci 0000:04:07.4: BAR 1: set to [io 0x5058-0x505b] (PCI address [0x5058-0x505b]) [ 0.557214] pci 0000:04:07.4: BAR 2: assigned [io 0x505c-0x505f] [ 0.557254] pci 0000:04:07.4: BAR 2: error updating (0x00505d != 0x005059) [ 0.557292] pci 0000:04:07.4: BAR 2: set to [io 0x505c-0x505f] (PCI address [0x505c-0x505f]) [ 0.557341] pci 0000:04:07.4: BAR 3: assigned [io 0x5060-0x5063] [ 0.557381] pci 0000:04:07.4: BAR 3: error updating (0x005061 != 0x005065) [ 0.557419] pci 0000:04:07.4: BAR 3: set to [io 0x5060-0x5063] (PCI address [0x5060-0x5063]) [ 0.557470] pci 0000:04:07.4: BAR 4: assigned [io 0x5064-0x5067] [ 0.557511] pci 0000:04:07.4: BAR 4: error updating (0x005065 != 0x005061) [ 0.557550] pci 0000:04:07.4: BAR 4: set to [io 0x5064-0x5067] (PCI address [0x5064-0x5067]) [ 0.557601] pci 0000:04:07.4: BAR 5: assigned [io 0x5068-0x506b] [ 0.557642] pci 0000:04:07.4: BAR 5: error updating (0x005069 != 0x00506d) [ 0.557680] pci 0000:04:07.4: BAR 5: set to [io 0x5068-0x506b] (PCI address [0x5068-0x506b]) [ 0.557731] pci 0000:04:07.5: BAR 0: assigned [io 0x506c-0x506f] [ 0.557771] pci 0000:04:07.5: BAR 0: error updating (0x00506d != 0x005069) [ 0.557810] pci 0000:04:07.5: BAR 0: set to [io 0x506c-0x506f] (PCI address [0x506c-0x506f]) [ 0.557862] pci 0000:04:07.5: BAR 1: assigned [io 0x5070-0x5073] [ 0.557903] pci 0000:04:07.5: BAR 1: error updating (0x005071 != 0x005075) [ 0.557941] pci 0000:04:07.5: BAR 1: set to [io 0x5070-0x5073] (PCI address [0x5070-0x5073]) [ 0.557992] pci 0000:04:07.5: BAR 2: assigned [io 0x5074-0x5077] [ 0.558039] pci 0000:04:07.5: BAR 2: error updating (0x005075 != 0x005071) [ 0.558078] pci 0000:04:07.5: BAR 2: set to [io 0x5074-0x5077] (PCI address [0x5074-0x5077]) [ 0.558129] pci 0000:04:07.5: BAR 3: assigned [io 0x5078-0x507b] [ 0.558171] pci 0000:04:07.5: BAR 3: error updating (0x005079 != 0x00507d) [ 0.558210] pci 0000:04:07.5: BAR 3: set to [io 0x5078-0x507b] (PCI address [0x5078-0x507b]) [ 0.558627] pci 0000:04:07.5: BAR 4: assigned [io 0x507c-0x507f] [ 0.558668] pci 0000:04:07.5: BAR 4: error updating (0x00507d != 0x005079) [ 0.558706] pci 0000:04:07.5: BAR 4: set to [io 0x507c-0x507f] (PCI address [0x507c-0x507f]) [ 0.558757] pci 0000:04:07.5: BAR 5: assigned [io 0x5080-0x5083] [ 0.558800] pci 0000:04:07.5: BAR 5: error updating (0x005081 != 0x005085) [ 0.558838] pci 0000:04:07.5: BAR 5: set to [io 0x5080-0x5083] (PCI address [0x5080-0x5083]) [ 0.558890] pci 0000:04:07.6: BAR 0: assigned [io 0x5084-0x5087] [ 0.558932] pci 0000:04:07.6: BAR 0: error updating (0x005085 != 0x005081) [ 0.558970] pci 0000:04:07.6: BAR 0: set to [io 0x5084-0x5087] (PCI address [0x5084-0x5087]) [ 0.559029] pci 0000:04:07.6: BAR 1: assigned [io 0x5088-0x508b] [ 0.559071] pci 0000:04:07.6: BAR 1: error updating (0x005089 != 0x00508d) [ 0.559110] pci 0000:04:07.6: BAR 1: set to [io 0x5088-0x508b] (PCI address [0x5088-0x508b]) [ 0.559162] pci 0000:04:07.6: BAR 2: assigned [io 0x508c-0x508f] [ 0.559203] pci 0000:04:07.6: BAR 2: error updating (0x00508d != 0x005089) [ 0.559242] pci 0000:04:07.6: BAR 2: set to [io 0x508c-0x508f] (PCI address [0x508c-0x508f]) [ 0.559294] pci 0000:04:07.6: BAR 3: assigned [io 0x5090-0x5093] [ 0.559335] pci 0000:04:07.6: BAR 3: error updating (0x005091 != 0x005095) [ 0.559374] pci 0000:04:07.6: BAR 3: set to [io 0x5090-0x5093] (PCI address [0x5090-0x5093]) [ 0.559426] pci 0000:04:07.6: BAR 4: assigned [io 0x5094-0x5097] [ 0.559466] pci 0000:04:07.6: BAR 4: error updating (0x005095 != 0x005091) [ 0.559504] pci 0000:04:07.6: BAR 4: set to [io 0x5094-0x5097] (PCI address [0x5094-0x5097]) [ 0.559555] pci 0000:04:07.6: BAR 5: assigned [io 0x5098-0x509b] [ 0.559594] pci 0000:04:07.6: BAR 5: error updating (0x005099 != 0x00509d) [ 0.559633] pci 0000:04:07.6: BAR 5: set to [io 0x5098-0x509b] (PCI address [0x5098-0x509b]) [ 0.559683] pci 0000:04:07.7: BAR 0: assigned [io 0x509c-0x509f] [ 0.559723] pci 0000:04:07.7: BAR 0: error updating (0x00509d != 0x005099) [ 0.559761] pci 0000:04:07.7: BAR 0: set to [io 0x509c-0x509f] (PCI address [0x509c-0x509f]) [ 0.559812] pci 0000:04:07.7: BAR 1: assigned [io 0x50a0-0x50a3] [ 0.559852] pci 0000:04:07.7: BAR 1: error updating (0x0050a1 != 0x0050a5) [ 0.559890] pci 0000:04:07.7: BAR 1: set to [io 0x50a0-0x50a3] (PCI address [0x50a0-0x50a3]) [ 0.559941] pci 0000:04:07.7: BAR 2: assigned [io 0x50a4-0x50a7] [ 0.559980] pci 0000:04:07.7: BAR 2: error updating (0x0050a5 != 0x0050a1) [ 0.560024] pci 0000:04:07.7: BAR 2: set to [io 0x50a4-0x50a7] (PCI address [0x50a4-0x50a7]) [ 0.560075] pci 0000:04:07.7: BAR 3: assigned [io 0x50a8-0x50ab] [ 0.560115] pci 0000:04:07.7: BAR 3: error updating (0x0050a9 != 0x0050ad) [ 0.560153] pci 0000:04:07.7: BAR 3: set to [io 0x50a8-0x50ab] (PCI address [0x50a8-0x50ab]) [ 0.560204] pci 0000:04:07.7: BAR 4: assigned [io 0x50ac-0x50af] [ 0.560244] pci 0000:04:07.7: BAR 4: error updating (0x0050ad != 0x0050a9) [ 0.560281] pci 0000:04:07.7: BAR 4: set to [io 0x50ac-0x50af] (PCI address [0x50ac-0x50af]) [ 0.560333] pci 0000:04:07.7: BAR 5: assigned [io 0x50b0-0x50b3] [ 0.560372] pci 0000:04:07.7: BAR 5: error updating (0x0050b1 != 0x0050b5) [ 0.560410] pci 0000:04:07.7: BAR 5: set to [io 0x50b0-0x50b3] (PCI address [0x50b0-0x50b3])
about the system: Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux alpha 3.1.9-1.4-desktop #1 SMP PREEMPT Fri Jan 27 08:55:10 UTC 2012 (efb5ff4) x86_64 Kernel command line: root=/dev/mapper/vg01-root resume=/dev/disk/by-id/ata-WDC_WD5002ABYS-02B1B0_WD-WCASY9667774-part3 showopts vga=normal Build Date: 10 November 2011 03:34:36PM
Thanks a lot in advance.
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On Tuesday, February 07, 2012 02:34 AM Paul Neuwirth wrote:
On Feb 5 2012 19:38, Paul Neuwirth wrote: Problem solved: changed the pci slot. But how can that happen? I did not change the configuration, which worked for more than a year. Tried several kernel parameters, but could not solve the ressource conflict (address space collission).
This happens every once in a while with a new kernel. I had a similar problem on just one machine when upgrading to the 2.7 kernel on 11.4; the hw had worked with a 2.6 kernel. Installing a 3.0 kernel solved the problem. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
participants (2)
-
Dennis Gallien -
Paul Neuwirth