RE: [SLE] nvidia gforce mx & linux - no go. someone at suse investigate
I actually managed to compile the nvidia drivers, but i had to removed an undefined identifier ( commented out ) to do with the i810 or something similar. compiled fine, but didnt work
the line was 1465 in interface.c if your're wondering ( off the top of my head )
i'll get 4.01 from the cvs site next week
someone should make this easier tho, i cant even get a basic x-setup working in 640 x 480 and i wouldnt call myself a total newbie.
dids
-----Original Message----- From: Jesse Marlin [mailto:jlm@compgen.com] Sent: 14 September 2000 19:45 To: Cleary, Mike Cc: 'Jesse.Marlin@compgen.com'; 'suse-linux-e@suse.com' Subject: RE: [SLE] nvidia gforce mx & linux - no go. someone at suse investigate
Cleary, Mike writes:
Jesse- Did you use the SuSE rpms from the xfree86 site?
Yes. The newest xfree86-4.01 rpms.
I had previously installed build 0.94, and I am wondering if I can just use the rpms to upgrade to 0.95...? I had lots
No. I originally tried to just upgrade to the newest 0.95 driver and the xfree86-4.0 I had installed quit on me saying that the GLX module expected xfree86-4.01. I installed the new xfree86-4.01, recompiled the kernel module, and it worked. I suspect that a module compiled for xfree86-4.0 would not work for xfree86-4.01.
of trouble before configuring Xfree86 (especially w/ sax2 ! ) but I guess I could always cut & paste from my old config
You should not have to run sax2 again. The nvidia drivers are really easy to compile, and they install the binaries in the right location. Just install xfree86-4.01, make and install the latest nvidia drivers, and away you go.
file....
TIA,
Mike
--------------------------------------------------------------------------
Michael Cleary UNIX Qualification and Commands Data General, a Division of EMC2 62 T.W. Alexander Dr. Research Triangle Park, NC mdcleary@dg-rtp.dg.com (919) 248-6033
--------------------------------------------------------------------------
-----Original Message----- From: Jesse Marlin [mailto:jlm@compgen.com] Sent: Thursday, September 14, 2000 1:13 PM To: dids Cc: Suse-Linux-E; Gary Subject: RE: [SLE] nvidia gforce mx & linux - no go. someone at suse
investigate
dids writes:
Ive tried this with 4.01
i download the suse 6.4 version of xfree4.01 and then the nvidia
which i compiled from source ) gives me errors saying the modules are newer than another file, doesnt explain which. ( when i run XFree86 )
should i try again by downloading the bog standard Xfree86 4.01 from
xfree86 site ?
Are you using the latest drivers from nvidia? I believe it is version 0.9.5. Prior to that they maintained two versions of the GLX drivers, one for xfree86-4.0 and one for xfree86-4.01. The new drivers are only for 4.01.
I have a GeForce 256, and it is working great. What type of card do you have?
even if i try and run an ordinary svga server i get a mass of snow
on
drivers ( the the
screen, ( xfree86 ). Im surprised at this.
Could my card be faulty ?
thanks dids
-----Original Message----- From: Gary [mailto:medmanks@mindspring.com] Sent: 14 September 2000 15:40 To: dids Cc: Suse-Linux-E Subject: Re: [SLE] nvidia gforce mx & linux - no go. someone at suse investigate
On Thu, Sep 14, 2000 at 08:28:33AM +0100 or thereabouts, dids wrote:
Ive given up tryign to get linux to run on my system since upgrading my graphics card.
this is a real disappointment as i couldnt wait to see how fast it was going to fly. Someone somewhere desperately needs to sort
im getting a nice warm glow about this feedback. u know theres no response on the x. newsgroups concerning this. i wish i had time to check this out immediately keep em coming richard -----Original Message----- From: Filip [mailto:vhf@skynet.be] Sent: 14 September 2000 21:06 To: dids Subject: RE: [SLE] nvidia gforce mx & linux - no go. someone at suse investigate Hi dids, With my son's computer via appolo 133 motherbord it doesn't work As I said I have a geforce DDR in my computer. This afternoon I just swapped the geforce DDR with my sons Geforce2 GTS. Even forgot to start at level init 2. Well, it just went off, got a nice screen. The only result I got for my son was with the fbdev driver. If you want to try do this : 1) start at boot wiith option vga=791 ( f.ex. suse vga=791 ), this gives you in vesa mode a display resolution 1024x768, colordepth 16bit 2) login as root in level 2 3) just run sax2 ( which gave me the best result) 4) you can try the option sax2 -m 0=fbdev ( its zero) 5) then you should get a display hope it helps. filip Le jeu, 14 sep 2000, vous avez écrit : this
out as the mx is a very good and reasonably priced card.
Install XFREE86 4.1 and then install the Linux reference drivers from Nvidia. This has worked successfully for many people. Xfree 3.xx will not work, must use 4.x
-- Best regards, Gary
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
participants (1)
-
richard＠diddyland.com