[opensuse] printer problem
HP 970Cxi, SuSE 9.3. Printer stopped printing after it ran out of paper. Yes, of course it has paper in it now. I have 2 of these printers, and neither one will print anymore, altho when I exchanged them, the system said "Found new hardware, do you want to configure it?" So I did, and it printed a test page. But now I can't seem to get back into the configuration, which must have some sort of problem, and the d....d Linux wants to open a wallet, whatever that means, and it wants a user name and a password, neither of which I know. (I never set up any wallet, or any password for that, as far as I recall.) This printer is connected via USB. Now what? Second printer problem: I would be happy to use my Laserjet, but for some reason the configuration says that YaST didn't set up HPLIP--it would seem that it can't--and when I try to test the configuration the print light on the Laserjet starts to flash, but it doesn't print anything either. This printer is connected via parallel port. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Monday 02 Apr 2007, Doug McGarrett wrote:
HP 970Cxi, SuSE 9.3. Printer stopped printing after it ran out of paper. Yes, of course it has paper in it now. I have 2 of these printers, and neither one will print anymore, altho when I exchanged them, the system said "Found new hardware, do you want to configure it?" So I did, and it printed a test page. But now I can't seem to get back into the configuration, which must have some sort of problem, and the d....d Linux wants to open a wallet, whatever that means, and it wants a user name and a password, neither of which I know. (I never set up any wallet, or any password for that, as far as I recall.) This printer is connected via USB. Now what?
To start the printing again, find the Printer Manager and then select Administration Mode button (then enter your root password when prompted) and then find the "Printer" menu near the top and then select "Start/Stop Printer" and then select "start" - hopefully that will get you going again.
Second printer problem: I would be happy to use my Laserjet, but for some reason the configuration says that YaST didn't set up HPLIP--it would seem that it can't--and when I try to test the configuration the print light on the Laserjet starts to flash, but it doesn't print anything either. This printer is connected via parallel port.
Not sure here but on my deskjet, teh light flashes when the ink is depleted. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
* Doug McGarrett <dmcgarrett@optonline.net> [01-01-70 11:34]:
HP 970Cxi, SuSE 9.3. Printer stopped printing after it ran out of paper. Yes, of course it has paper in it now. I have 2 of these printers, and neither one will print anymore, altho when I exchanged them, the system said "Found new hardware, do you want to configure it?" So I did, and it printed a test page. But now I can't seem to get back into the configuration, which must have some sort of problem, and the d....d Linux wants to open a wallet, whatever that means, and it wants a user name and a password, neither of which I know. (I never set up any wallet, or any password for that, as far as I recall.) This printer is connected via USB. Now what?
you don't say which versin of cups (? <1.2) or openSUSE, but if cups is less than 1.2, try: /usr/bin/enable <cups-printer-name> The path is necessary as 'enable' is a bash built-in command with a different function.
Second printer problem: I would be happy to use my Laserjet, but for some reason the configuration says that YaST didn't set up HPLIP--it would seem that it can't--and when I try to test the configuration the print light on the Laserjet starts to flash, but it doesn't print anything either. This printer is connected via parallel port.
?? -- Patrick Shanahan Registered Linux User #207535 http://wahoo.no-ip.org @ http://counter.li.org HOG # US1244711 Photo Album: http://wahoo.no-ip.org/gallery2 OpenSUSE Linux http://en.opensuse.org/ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Monday 02 April 2007 18:47, Patrick Shanahan wrote:
* Doug McGarrett <dmcgarrett@optonline.net> [01-01-70 11:34]:
HP 970Cxi, SuSE 9.3. Printer stopped printing after it ran out of paper. Yes, of course it has paper in it now. I have 2 of these printers, and neither one will print anymore, altho when I exchanged them, the system said "Found new hardware, do you want to configure it?" So I did, and it printed a test page. But now I can't seem to get back into the configuration, which must have some sort of problem, and the d....d Linux wants to open a wallet, whatever that means, and it wants a user name and a password, neither of which I know. (I never set up any wallet, or any password for that, as far as I recall.) This printer is connected via USB. Now what?
you don't say which versin of cups (? <1.2) or openSUSE, but if cups is less than 1.2, try: /usr/bin/enable <cups-printer-name>
I tried that, and was rewarded with "Password for doug on localhost?" I don't know what password it wants. I have tried all the passwords that I normally would use, and none of them work. Then it says: enable: Operation failed: client-error-not-authorized I don't know how to determine which version of CUPS is in use. Whatever came with Suse 9.3, I assume, unless YaST updated it along the way.
The path is necessary as 'enable' is a bash built-in command with a different function.
Second printer problem: I would be happy to use my Laserjet, but for some reason the configuration says that YaST didn't set up HPLIP--it would seem that it can't--and when I try to test the configuration the print light on the Laserjet starts to flash, but it doesn't print anything either. This printer is connected via parallel port.
??
-- Patrick Shanahan Registered Linux User #207535 http://wahoo.no-ip.org @ http://counter.li.org HOG # US1244711 Photo Album: http://wahoo.no-ip.org/gallery2 OpenSUSE Linux http://en.opensuse.org/
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
* Doug McGarrett <dmcgarrett@optonline.net> [04-02-07 20:32]: [...]
I tried that, and was rewarded with "Password for doug on localhost?" I don't know what password it wants. I have tried all the passwords that I normally would use, and none of them work. Then it says:
enable: Operation failed: client-error-not-authorized
I don't know how to determine which version of CUPS is in use. Whatever came with Suse 9.3, I assume, unless YaST updated it along the way.
come on, you've been using SUSE/openSUSE linux for a long time. rpm -q cups lppasswd is your problem man lppasswd or search the opensuse list archives. It has been mentioned/described *many* times. -- Patrick Shanahan Registered Linux User #207535 http://wahoo.no-ip.org @ http://counter.li.org HOG # US1244711 Photo Album: http://wahoo.no-ip.org/gallery2 OpenSUSE Linux http://en.opensuse.org/ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Monday 02 April 2007 21:46, Patrick Shanahan wrote:
* Doug McGarrett <dmcgarrett@optonline.net> [04-02-07 20:32]: [...]
I tried that, and was rewarded with "Password for doug on localhost?" I don't know what password it wants. I have tried all the passwords that I normally would use, and none of them work. Then it says:
enable: Operation failed: client-error-not-authorized
I don't know how to determine which version of CUPS is in use. Whatever came with Suse 9.3, I assume, unless YaST updated it along the way.
come on, you've been using SUSE/openSUSE linux for a long time.
rpm -q cups
Of course it should have been obvious that rpm would lead to the version. The version it reports is 1.1.23-7.6
lppasswd is your problem
man lppasswd
I have read man lppasswd but I don't know what to do next. It would appear from the error message that the username is doug, but it says on localhost, and the man lppasswd refers to cups, not localhost, or am I still missing something? If I go to KJobViewer, I can delete everything queued but KDE Print System and KDE Print Test, which are owned by root. If I could find those files in a directory (where is it and what's it called?) I might be able to su and delete them also, and then maybe the system might work, I don't know.
or search the opensuse list archives. It has been mentioned/described *many* times.
-- Patrick Shanahan Registered Linux User #207535 http://wahoo.no-ip.org @ http://counter.li.org HOG # US1244711 Photo Album: http://wahoo.no-ip.org/gallery2 OpenSUSE Linux http://en.opensuse.org/
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
* Doug McGarrett <dmcgarrett@optonline.net> [04-03-07 18:22]:
On Monday 02 April 2007 21:46, Patrick Shanahan wrote:
* Doug McGarrett <dmcgarrett@optonline.net> [04-02-07 20:32]: [...] [...] I have read man lppasswd but I don't know what to do next. It would appear from the error message that the username is doug, but it says on localhost, and the man lppasswd refers to cups, not localhost, or am I still missing something?
yes, you are missing something. From 'man lppasswd': DESCRIPTION lppasswd adds, changes, or deletes passwords in the CUPS digest password file, passwd.md5. When run by a normal user, lppasswd will prompt for the old and new passwords. When run by the super-user, lppasswd can add new accounts (-a username), change existing accounts (username), or delete accounts (-x username) in the digest password file. Digest usernames do not have to match local UNIX user‐ names. [....] also SEE ALSO lp(1), lpr(1), http://localhost:631/help
If I go to KJobViewer, I can delete everything queued but KDE Print System and KDE Print Test, which are owned by root. If I could find those files in a directory (where is it and what's it called?) I might be able to su and delete them also, and then maybe the system might work, I don't know.
did you try KJobViewer as root ?? Root would own root's jobs.
or search the opensuse list archives. It has been mentioned/described *many* times.
not tried, not interested ???? -- Patrick Shanahan Registered Linux User #207535 http://wahoo.no-ip.org @ http://counter.li.org HOG # US1244711 Photo Album: http://wahoo.no-ip.org/gallery2 OpenSUSE Linux http://en.opensuse.org/ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Tuesday 03 April 2007 18:50, Patrick Shanahan wrote:
* Doug McGarrett <dmcgarrett@optonline.net> [04-03-07 18:22]:
On Monday 02 April 2007 21:46, Patrick Shanahan wrote:
* Doug McGarrett <dmcgarrett@optonline.net> [04-02-07 20:32]: [...]
[...]
I have read man lppasswd but I don't know what to do next. It would appear from the error message that the username is doug, but it says on localhost, and the man lppasswd refers to cups, not localhost, or am I still missing something?
yes, you are missing something. From 'man lppasswd':
DESCRIPTION lppasswd adds, changes, or deletes passwords in the CUPS digest password file, passwd.md5. When run by a normal user, lppasswd will prompt for the old and new passwords. When run by the super-user, lppasswd can add new accounts (-a username), change existing accounts (username), or delete accounts (-x username) in the digest password file. Digest usernames do not have to match local UNIX userâ names.
[....] also
SEE ALSO lp(1), lpr(1), http://localhost:631/help
If I go to KJobViewer, I can delete everything queued but KDE Print System and KDE Print Test, which are owned by root. If I could find those files in a directory (where is it and what's it called?) I might be able to su and delete them also, and then maybe the system might work, I don't know.
did you try KJobViewer as root ?? Root would own root's jobs.
As root, cd /KJobViewer no such file or directory
or search the opensuse list archives. It has been mentioned/described *many* times.
not tried, not interested ????
There are only three communications, and they did not seem helpful. Used Google: opensuse list archive lppasswd I am kind of desperate here. The XP machine may be down for the count, and the only thing sort of working is this Linux machine which I cannot print from, for no obvious reason--it was working fine, even tho only with the color printer, and all of a sudden, blooie! Is there anyone that anyone knows on eastern Long Island, NY that might be able to make this thing work? I suppose that I could wipe and reinstall, but I have about 4 MB of data--from this list--that I would like to keep, and no CD or DVD writer on the machine, and I'm a bit worried about trying to add one while everthing else is in flux. --doug
-- Patrick Shanahan Registered Linux User #207535 http://wahoo.no-ip.org @ http://counter.li.org HOG # US1244711 Photo Album: http://wahoo.no-ip.org/gallery2 OpenSUSE Linux http://en.opensuse.org/
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Tue, 2007-04-03 at 21:17 -0400, Doug McGarrett wrote:
On Tuesday 03 April 2007 18:50, Patrick Shanahan wrote:
* Doug McGarrett <dmcgarrett@optonline.net> [04-03-07 18:22]:
On Monday 02 April 2007 21:46, Patrick Shanahan wrote:
* Doug McGarrett <dmcgarrett@optonline.net> [04-02-07 20:32]: [...]
[...]
I have read man lppasswd but I don't know what to do next. It would appear from the error message that the username is doug, but it says on localhost, and the man lppasswd refers to cups, not localhost, or am I still missing something?
yes, you are missing something. From 'man lppasswd':
DESCRIPTION lppasswd adds, changes, or deletes passwords in the CUPS digest password file, passwd.md5. When run by a normal user, lppasswd will prompt for the old and new passwords. When run by the super-user, lppasswd can add new accounts (-a username), change existing accounts (username), or delete accounts (-x username) in the digest password file. Digest usernames do not have to match local UNIX user†names.
[....] also
The command needs to be run as root. You can do this either by logging in as root or simply use su to become root. The command is: lppasswd -g sys -a some_admin_username You will be asked to supply a password twice. Once this is setup you will need to use this supplied user name and password. And the some_admin_username can be anything you want it to be. -- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Tuesday 2007-04-03 at 21:17 -0400, Doug McGarrett wrote:
not tried, not interested ????
There are only three communications, and they did not seem helpful. Used Google: opensuse list archive lppasswd
WHAT!!! First: THIS is the list archive where you have to look: <http://lists.opensuse.org/opensuse> And search there for the messages I told you by writer name. There is a search feature. Read this: <http://en.opensuse.org/SDB:CUPS_in_a_Nutshell> it explains it all.
I am kind of desperate here. The XP machine may be down for the count, and the only thing sort of working is this Linux machine which I cannot print from, for no obvious reason--it was working fine, even tho only with the color printer, and all of a sudden, blooie!
Is there anyone that anyone knows on eastern Long Island, NY that might be able to make this thing work? I suppose that I could wipe and reinstall, but I have about 4 MB of data--from this list--that I would like to keep, and no CD or DVD writer on the machine, and I'm a bit worried about trying to add one while everthing else is in flux.
You do not listen. We already told you several times, several people, how to do it, you do not listen. First, define a password as explained already. No, not even root can enter without a new password for the printer: lppasswd -g sys -a some_admin_username Then, for instance, go to <http://localhost:631/ and simply tell your printer to print. Click, click. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGE27ltTMYHG2NR9URAmbsAJ4xgrDFESpV/CrNFYk/AZDOQWT2XQCfcJ+p Zj/S9f9nV9WIkQLmpeLiE3I= =m2q9 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Wednesday 04 April 2007 05:24, Carlos E. R. wrote:
The Tuesday 2007-04-03 at 21:17 -0400, Doug McGarrett wrote:
not tried, not interested ????
There are only three communications, and they did not seem helpful. Used Google: opensuse list archive lppasswd
WHAT!!!
First: THIS is the list archive where you have to look:
<http://lists.opensuse.org/opensuse>
And search there for the messages I told you by writer name. There is a search feature.
Read this:
<http://en.opensuse.org/SDB:CUPS_in_a_Nutshell>
it explains it all.
I am kind of desperate here. The XP machine may be down for the count, and the only thing sort of working is this Linux machine which I cannot print from, for no obvious reason--it was working fine, even tho only with the color printer, and all of a sudden, blooie!
Is there anyone that anyone knows on eastern Long Island, NY that might be able to make this thing work? I suppose that I could wipe and reinstall, but I have about 4 MB of data--from this list--that I would like to keep, and no CD or DVD writer on the machine, and I'm a bit worried about trying to add one while everthing else is in flux.
You do not listen.
We already told you several times, several people, how to do it, you do not listen.
First, define a password as explained already. No, not even root can enter without a new password for the printer:
lppasswd -g sys -a some_admin_username
Then, for instance, go to
and simply tell your printer to print. Click, click.
-- Cheers, Carlos E. R.
I did what you said. I don't know if the pasword really changed or not, but the command http://localhost:611/ produces the reply No such file or directory (running from su root) --doug -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Doug McGarrett wrote:
On Wednesday 04 April 2007 05:24, Carlos E. R. wrote:
The Tuesday 2007-04-03 at 21:17 -0400, Doug McGarrett wrote:
not tried, not interested ???? There are only three communications, and they did not seem helpful. Used Google: opensuse list archive lppasswd WHAT!!!
First: THIS is the list archive where you have to look:
<http://lists.opensuse.org/opensuse>
And search there for the messages I told you by writer name. There is a search feature.
Read this:
<http://en.opensuse.org/SDB:CUPS_in_a_Nutshell>
it explains it all.
I am kind of desperate here. The XP machine may be down for the count, and the only thing sort of working is this Linux machine which I cannot print from, for no obvious reason--it was working fine, even tho only with the color printer, and all of a sudden, blooie!
Is there anyone that anyone knows on eastern Long Island, NY that might be able to make this thing work? I suppose that I could wipe and reinstall, but I have about 4 MB of data--from this list--that I would like to keep, and no CD or DVD writer on the machine, and I'm a bit worried about trying to add one while everthing else is in flux. You do not listen.
We already told you several times, several people, how to do it, you do not listen.
First, define a password as explained already. No, not even root can enter without a new password for the printer:
lppasswd -g sys -a some_admin_username
Then, for instance, go to
and simply tell your printer to print. Click, click.
-- Cheers, Carlos E. R.
I did what you said. I don't know if the pasword really changed or not, but the command http://localhost:611/ produces the reply No such file or directory (running from su root)
--doug If you notice your reply uses port 611. It is suppose to be 631. I would also suggest that you list your steps and the results from the command.
Do you have the cups packages loaded? When you execute the lppasswd as root? Is the cups demon running? Just stating what happen is pretty useless in diagnosing your prblem. -- Joseph Loo jloo@acm.org -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Fri, 2007-04-06 at 20:16 -0400, Doug McGarrett wrote:
On Wednesday 04 April 2007 05:24, Carlos E. R. wrote:
You do not listen.
We already told you several times, several people, how to do it, you do not listen.
First, define a password as explained already. No, not even root can enter without a new password for the printer:
lppasswd -g sys -a some_admin_username
Then, for instance, go to
and simply tell your printer to print. Click, click.
I did what you said. I don't know if the pasword really changed or not, but the command http://localhost:611/ produces the reply No such file or directory (running from su root)
http://localhost:631 is not a command it is a web address you enter into your web browser to access the configuration pages for printers. Enter the username/password you set in the lppasswd command to enter admin mode. -- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Friday 06 April 2007 22:11, Kenneth Schneider wrote:
On Fri, 2007-04-06 at 20:16 -0400, Doug McGarrett wrote:
On Wednesday 04 April 2007 05:24, Carlos E. R. wrote:
You do not listen.
We already told you several times, several people, how to do it, you do not listen.
First, define a password as explained already. No, not even root can enter without a new password for the printer:
lppasswd -g sys -a some_admin_username
Then, for instance, go to
and simply tell your printer to print. Click, click.
I did what you said. I don't know if the pasword really changed or not, but the command http://localhost:611/ produces the reply No such file or directory (running from su root)
http://localhost:631 is not a command it is a web address you enter into your web browser to access the configuration pages for printers. Enter the username/password you set in the lppasswd command to enter admin mode.
-- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998
OK, I corrected the number to 631. It seemed to accept my password, but it wouldn't print anything--not the stuff stuck in the queue, or a test. --doug -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Friday 06 April 2007 22:11, Kenneth Schneider wrote:
On Fri, 2007-04-06 at 20:16 -0400, Doug McGarrett wrote:
On Wednesday 04 April 2007 05:24, Carlos E. R. wrote:
You do not listen.
We already told you several times, several people, how to do it, you do not listen.
First, define a password as explained already. No, not even root can enter without a new password for the printer:
lppasswd -g sys -a some_admin_username
Then, for instance, go to
and simply tell your printer to print. Click, click.
I did what you said. I don't know if the pasword really changed or not, but the command http://localhost:611/ produces the reply No such file or directory (running from su root)
http://localhost:631 is not a command it is a web address you enter into your web browser to access the configuration pages for printers. Enter the username/password you set in the lppasswd command to enter admin mode.
-- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998
Well, the password thing seemed not to have worked. When I went to the print manager, and it asked for a password, it burped and said it didn't recognise the pw. I gave it the pw that I put in in the lppasswd dialog, that you provided above. Why in hell Linux needs a password to print something that can be seen on the screen is absolutely beyond me. And why that password is different from the root pw is even further beyond me. I may have to put some version of Windows on the machine so that I can print out mail that I need for work that I do. This is ridiculous! --doug -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Saturday 2007-04-07 at 01:59 -0400, Doug McGarrett wrote:
Well, the password thing seemed not to have worked. When I went to the print manager, and it asked for a password, it burped and said it didn't recognise the pw. I gave it the pw that I put in in the lppasswd dialog, that you provided above.
And the same user you gave it? It doesn't need to be root. Check the /etc/cups/cupsd.conf for who is allowed access. It has comments. For instance: <Location /admin> AuthType BasicDigest AuthClass Group AuthGroupName sys ## Restrict access to local domain Order Deny,Allow Deny From All Allow From 127.0.0.1
Why in hell Linux needs a password to print something that can be seen on the screen is absolutely beyond me. And why that password is different from the root pw is even further beyond me.
The password is not for printing. It is for altering printer configuration, for managing the printer. You can see the printers and the pending jobs without password. Why it must be different is explained in the docus and has been comented here on other ocassions - you are of course free to ignore that recomendation, sp if you don't network your cups server. Notice that you can administer the printer as user, too. No need to be root. You should simply click on the "printers" tab, look at your printer, where you might see something like this: lp "Paused" Description: default configuration Location: local Make and Model: Canon BJC-4000 Foomatic/bjc600 (recommended) Printer State: stopped, accepting jobs, published. Device URI: parallel:/dev/lp0 Print Test Page *Start Printer* Reject Jobs Move All Jobs Cancel All Jobs Unpublish Printer Modify Printer Set Printer Options Delete Printer Set As Default Set Allowed Users where I have shown the printer as stopped and I would have to click on "Start Printer" to print again. You can also go to the "Job" tabs, and list all pending or completed jobs. You might even reprint and old job. And you have a "Help" tab too. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGF3eOtTMYHG2NR9URAkT5AJ9TiWeF9mZAfP7v4ahk4F17v0BvigCeMBDb ckHLeipquQP32tMjG4X2rJE= =nE/P -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Saturday 07 April 2007 06:50, Carlos E. R. wrote:
The Saturday 2007-04-07 at 01:59 -0400, Doug McGarrett wrote:
Well, the password thing seemed not to have worked. When I went to the print manager, and it asked for a password, it burped and said it didn't recognise the pw. I gave it the pw that I put in in the lppasswd dialog, that you provided above.
And the same user you gave it? It doesn't need to be root.
Check the /etc/cups/cupsd.conf for who is allowed access. It has comments.
From root:
linux:etc # cups/cupsd.conf bash: cups/cupsd.conf: Permission denied
For instance:
<Location /admin>
AuthType BasicDigest AuthClass Group AuthGroupName sys
## Restrict access to local domain Order Deny,Allow Deny From All Allow From 127.0.0.1
-- Cheers, Carlos E. R.
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Saturday 07 April 2007 22:25, Doug McGarrett wrote:
On Saturday 07 April 2007 06:50, Carlos E. R. wrote:
The Saturday 2007-04-07 at 01:59 -0400, Doug McGarrett wrote:
Well, the password thing seemed not to have worked. When I went to the print manager, and it asked for a password, it burped and said it didn't recognise the pw. I gave it the pw that I put in in the lppasswd dialog, that you provided above.
And the same user you gave it? It doesn't need to be root.
Check the /etc/cups/cupsd.conf for who is allowed access. It has comments.
From root: linux:etc # cups/cupsd.conf bash: cups/cupsd.conf: Permission denied
For instance:
<Location /admin>
AuthType BasicDigest AuthClass Group AuthGroupName sys
## Restrict access to local domain Order Deny,Allow Deny From All Allow From 127.0.0.1
-- Cheers, Carlos E. R.
Well, I think the trick was the cups reset. Something seems to have hung up, somewhere. It also didn't help that I changed the physical printer to another of the same kind, with an obviously different serial number. And a certain amount of black magic--iow, I got lucky. Something is wrong with the color rendition, but black comes out black, so that will do for a while. I still don't know how to get the LaserJet to print. Someone suggested setting it up as a different type (LJ4, for example) but I don't know how to make SuSE forget that I installed it as a 2200D. So thank you for all the folks that tried to help, and some of you did. There are obviously a bunch of things I still don't understand, like why I got a "permission denied" on cupsd.conf from root. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 4/8/07, Doug McGarrett <dmcgarrett@optonline.net> wrote:
From root: linux:etc # cups/cupsd.conf bash: cups/cupsd.conf: Permission denied
There are obviously a bunch of things I still don't understand, like why I got a "permission denied" on cupsd.conf from root.
Because you haven't issued a command to run on that file. The first thing you write on the command line must be a command. Bash therefore interpreted your "cups/cupsd.conf" as a command, but the file is not executable, ie, it does not have the permissions set which would allow it to be "run". Hence "Permission denied". What you want to do is use a command on the file. For example: # less /etc/cups/cups.conf g -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sat, 2007-04-07 at 23:09 -0400, Doug McGarrett wrote:
Well, I think the trick was the cups reset. Something seems to have hung up, somewhere. It also didn't help that I changed the physical printer to another of the same kind, with an obviously different serial number. And a certain amount of black magic--iow, I got lucky. Something is wrong with the color rendition, but black comes out black, so that will do for a while.
I still don't know how to get the LaserJet to print. Someone suggested setting it up as a different type (LJ4, for example) but I don't know how to make SuSE forget that I installed it as a 2200D.
There is no need to have openSUSE "forget" the printer, you only need to change the driver used. And like any OS used, you delete the printer to have the system "forget" it. -- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Saturday 2007-04-07 at 23:09 -0400, Doug McGarrett wrote:
I still don't know how to get the LaserJet to print. Someone suggested setting it up as a different type (LJ4, for example) but I don't know how to make SuSE forget that I installed it as a 2200D.
You can install as many print drivers for the same physical printer as you want, via the web interface. Simply give each one a diferent name, and choose one when you print - or set any one as default. And you can of course delete any one. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGGO4ytTMYHG2NR9URArkeAKCHg7cSwTlzLE7/KIpApXli/hfxMwCeIahg Iwhaun7qnvvnd4Te352zE+8= =dw4l -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Saturday 07 April 2007 22:09, Doug McGarrett wrote: ....
So thank you for all the folks that tried to help, and some of you did. There are obviously a bunch of things I still don't understand, like why I got a "permission denied" on cupsd.conf from root.
Doug, for viewing and editing configuration files, as well for many other file management and administration tasks you will save yourself time on learning if you look at: http://en.opensuse.org/Midnight_Commander and for short list of useful features http://en.opensuse.org/Midnight_Commander/Tips There is a lot lesser to learn, most used features are shown in main window, lesser used are in menus. -- Regards, Rajko. http://en.opensuse.org/Portal -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Saturday 2007-04-07 at 22:25 -0400, Doug McGarrett wrote:
Check the /etc/cups/cupsd.conf for who is allowed access. It has comments.
From root: linux:etc # cups/cupsd.conf bash: cups/cupsd.conf: Permission denied
Common! Are you serious? You have been using Linux for a year at least, and you stump on that one? Since when do you try to RUN configuration file in /etc? If you are in doubt, simply do "ls -l /etc/cups/cupsd.conf". Is it executable? No? Then why do you try to run it? Configuration files are meant to be edited, not run. So pick up your favorite editor, and edit it (as root). If yuo don't know which, try mcedit (the stand alone editor from midnight comander) inside an xterm. I'll assume you are low on coffee, or had a bad long day. :-) - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGGOaatTMYHG2NR9URAmEeAKCVd8D6e3WMIaqizHmg6zVMU2QEnACfWRxA zCRHChAD6R/mkNdh7JXPkmI= =vNqy -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Wednesday 04 April 2007 05:24, Carlos E. R. wrote:
The Tuesday 2007-04-03 at 21:17 -0400, Doug McGarrett wrote:
not tried, not interested ????
There are only three communications, and they did not seem helpful. Used Google: opensuse list archive lppasswd
WHAT!!!
First: THIS is the list archive where you have to look:
<http://lists.opensuse.org/opensuse>
And search there for the messages I told you by writer name. There is a search feature.
Read this:
<http://en.opensuse.org/SDB:CUPS_in_a_Nutshell>
it explains it all.
I am kind of desperate here. The XP machine may be down for the count, and the only thing sort of working is this Linux machine which I cannot print from, for no obvious reason--it was working fine, even tho only with the color printer, and all of a sudden, blooie!
Is there anyone that anyone knows on eastern Long Island, NY that might be able to make this thing work? I suppose that I could wipe and reinstall, but I have about 4 MB of data--from this list--that I would like to keep, and no CD or DVD writer on the machine, and I'm a bit worried about trying to add one while everthing else is in flux.
You do not listen.
We already told you several times, several people, how to do it, you do not listen.
First, define a password as explained already. No, not even root can enter without a new password for the printer:
lppasswd -g sys -a some_admin_username
Then, for instance, go to
and simply tell your printer to print. Click, click.
-- Cheers, Carlos E. R.
Well, I tried to input a new password. There was no indication that it didn't like it, but when I tried to make the printer output the protected files, it didn't recognise the password I had entered--6 aphlamerics, as requested, starting with a number and followed by 5 letters. Please somebody, tell me how to salvage this mess--in plain English, one step at a time. doug -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Lørdag 07 april 2007 02:26 skrev Doug McGarrett:
On Wednesday 04 April 2007 05:24, Carlos E. R. wrote: [..] Please somebody, tell me how to salvage this mess--in plain English, one step at a time.
doug
HI Doug and list, - let's do some stepwise debugging :-) - first, it doesn't hurt to repeat the lppasswd entry, making dead sure what one types in (as root): lppasswd -g sys -a doug Now fire up your browser, goto http://localhost:631 Select manage printers How many printers do you see? Are they green or red, what does their status say? CUPS generally, is a fine printing mechanism. It has its quirks here and there, mostly popping up because one doesn't thoroughly understand the way it's working. That the case for me, anyhow. But there are many fine resources for more knowledge, how-tos and all. Some have already been mentioned in this thread. -- ------------------------------------------------------------------------- Med venlig hilsen/Best regards Verner Kjærsgaard -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Saturday 07 April 2007 04:36, Verner Kjærsgaard wrote:
Lørdag 07 april 2007 02:26 skrev Doug McGarrett:
On Wednesday 04 April 2007 05:24, Carlos E. R. wrote:
[..]
Please somebody, tell me how to salvage this mess--in plain English, one step at a time.
doug
HI Doug and list,
- let's do some stepwise debugging :-) - first, it doesn't hurt to repeat the lppasswd entry, making dead sure what one types in (as root):
lppasswd -g sys -a doug
Aster adding your user login name (above is assumed that your login name is doug) restart cups as root with: rccups restart to reread configuration. CUPS stores user authentication information as configuration settings. Generally, in Linux background processes (demons) read configuration on start. If configuration is changed, they have to be stopped and started again. This is not done automatically as multiuser systems are not designed to interrupt other folk that is using system without good reason (server malfunction), or system administrator approval. I guess that some authentication shema exists that allows password change on the fly, with instant access with new password, but I don't know can CUPS use such functionality.
Now fire up your browser, goto http://localhost:631
Select manage printers How many printers do you see? Are they green or red, what does their status say? ...
-- Regards, Rajko. http://en.opensuse.org/Portal -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Saturday 2007-04-07 at 06:43 -0500, Rajko M. wrote:
lppasswd -g sys -a doug
Aster adding your user login name (above is assumed that your login name is doug) restart cups as root with: rccups restart to reread configuration. CUPS stores user authentication information as configuration settings.
That is not necesary. I just added user "doug" to my system, and tried to "admin" a printer with that user (which is not a real user on my system). No problem, I just entered the user name "doug" and its new pasword and was allowed entry just fine. Then, I deleted "doug" and was denied entry. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGF7BitTMYHG2NR9URApanAJsFrEiSDvlEw90ESrlfb5c+zgsLnwCdHffe rZS3KP9SrN76zLZILUEtZW0= =qL1K -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Carlos E. R. wrote:
The Saturday 2007-04-07 at 06:43 -0500, Rajko M. wrote:
lppasswd -g sys -a doug Aster adding your user login name (above is assumed that your login name is doug) restart cups as root with: rccups restart to reread configuration. CUPS stores user authentication information as configuration settings.
That is not necesary. I just added user "doug" to my system, and tried to "admin" a printer with that user (which is not a real user on my system). No problem, I just entered the user name "doug" and its new pasword and was allowed entry just fine. Then, I deleted "doug" and was denied entry.
There's an old Bulgarian saying: "The more you load the donkey with treasures the deeper it sinks into the moor." -- Jos van Kan registered Linux user #152704 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Saturday 07 April 2007 05:36, Verner Kjærsgaard wrote:
Lørdag 07 april 2007 02:26 skrev Doug McGarrett:
On Wednesday 04 April 2007 05:24, Carlos E. R. wrote:
[..]
Please somebody, tell me how to salvage this mess--in plain English, one step at a time.
doug
HI Doug and list,
- let's do some stepwise debugging :-) - first, it doesn't hurt to repeat the lppasswd entry, making dead sure what one types in (as root):
lppasswd -g sys -a doug
Now fire up your browser, goto http://localhost:631
Select manage printers How many printers do you see? Are they green or red, what does their status say?
CUPS generally, is a fine printing mechanism. It has its quirks here and there, mostly popping up because one doesn't thoroughly understand the way it's working. That the case for me, anyhow. But there are many fine resources for more knowledge, how-tos and all. Some have already been mentioned in this thread.
-- ------------------------------------------------------------------------- Med venlig hilsen/Best regards Verner Kjærsgaard
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Saturday 07 April 2007 05:36, Verner Kjærsgaard wrote:
Lørdag 07 april 2007 02:26 skrev Doug McGarrett:
On Wednesday 04 April 2007 05:24, Carlos E. R. wrote:
[..]
Please somebody, tell me how to salvage this mess--in plain English, one step at a time.
doug
HI Doug and list,
- let's do some stepwise debugging :-) - first, it doesn't hurt to repeat the lppasswd entry, making dead sure what one types in (as root):
lppasswd -g sys -a doug
Now fire up your browser, goto http://localhost:631
Select manage printers How many printers do you see? Are they green or red, what does their status say?
/snip/ ------------------------------------
Med venlig hilsen/Best regards Verner Kjærsgaard
When I went to the localhost:631, I found an error message which said the printer , S/N thus and so. was not found. This makes sense, as this is a different printer of the same type. So I told the thing to delete the printer. Then I went back to the KDE printing manager, and found the old serial numbered printer still there, so I changed the s/n to the number on this printer. Then that gave some kind of error message about the port being wrong. It's the same USB port I have always used--I have no other USB devices. Anyway, I said continue anyway, but it would not print. I need to thoroughly cleanse the system of all printers, of any type or serial number and then start over. How do I do that? Thanx Verner, at least I seem to have discovered a few things-- all except an answer! --doug -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Saturday 2007-04-07 at 22:14 -0400, Doug McGarrett wrote:
I need to thoroughly cleanse the system of all printers, of any type or serial number and then start over. How do I do that?
In cups, remove or delete printer. If kde doesn't notice, log out, log in. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGGO7LtTMYHG2NR9URAlYTAJ94BDnEg30If3WQZfFAXehlKNkBSgCfYk15 ELLXNouoK4ZTFw7lcFzK6MM= =L6mN -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sunday 08 April 2007 09:31, Carlos E. R. wrote:
The Saturday 2007-04-07 at 22:14 -0400, Doug McGarrett wrote:
I need to thoroughly cleanse the system of all printers, of any type or serial number and then start over. How do I do that?
In cups, remove or delete printer. If kde doesn't notice, log out, log in.
-- Cheers, Carlos E. R. I don't mean to piggyback on this thread, but it seems easiest, and is not really OT.
Having had problems with printers in 9.3, which I intend to stay with until probably at least 6 months from now, I would like a recommendation for a low-cost laser that will absolutely work with this OS out of the box. I can use USB or parallel, whichever is more reliable. I am getting more and more frustrated with M/S and XP/SP2, and since I lost almost everything in a disk crash, now is the time to look more seriously at Linux, but I _must_ have working printing!!! (If I could install and get hplip to work, I might be able to use my big HP Laser, that used to work with 10.0, but I've had no luck doing that. Any help would be appreciated. Do I have to download a different copy that isn't on the floppies from someplace, and if so, where? And how? --doug -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Monday April 30 2007 18:46, Doug McGarrett wrote:
On Sunday 08 April 2007 09:31, Carlos E. R. wrote:
The Saturday 2007-04-07 at 22:14 -0400, Doug McGarrett wrote:
I need to thoroughly cleanse the system of all printers, of any type or serial number and then start over. How do I do that?
In cups, remove or delete printer. If kde doesn't notice, log out, log in.
-- Cheers, Carlos E. R.
I don't mean to piggyback on this thread, but it seems easiest, and is not really OT.
Having had problems with printers in 9.3, which I intend to stay with until probably at least 6 months from now, I would like a recommendation for a low-cost laser that will absolutely work with this OS out of the box. I can use USB or parallel, whichever is more reliable. I am getting more and more frustrated with M/S and XP/SP2, and since I lost almost everything in a disk crash, now is the time to look more seriously at Linux, but I _must_ have working printing!!!
(If I could install and get hplip to work, I might be able to use my big HP Laser, that used to work with 10.0, but I've had no luck doing that. Any help would be appreciated. Do I have to download a different copy that isn't on the floppies from someplace, and if so, where? And how?
--doug If your looking for a low cost color laser I use a Xerox Phaser 6120, four
color. Was $299.US from either Xerox Direct or CDW. Xerox supplies a PPD that you put in CUPS (Directions are included and easy.) I'm on SUSE 10.2 and have had no printer problems except from ISCAN which doesn't scale correctly. All other applications I use work directly out of the box. LPR also works with it.
HP also makes a 4 co;or laser in this price range but ink cartridges are more expensive than the Xerox ones. I've had mine since Nov. 2006. -- Russ Linux register user 441463 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Monday 30 April 2007 06:46:09 pm Doug McGarrett wrote:
I don't mean to piggyback on this thread, but it seems easiest, and is not really OT.
Yeah....right... </jane curtian mode>
Having had problems with printers in 9.3, which I intend to stay with until probably at least 6 months from now, I would like a recommendation for a low-cost laser that will absolutely work with this OS out of the box.
Well, my Epson CX3200 USB printer/scanner worked perfectly out of the box on 9.1 > 10.1. I've had no issues whatsoever. I have an HP 1380 at work (parallel) which works as well. My mom's got a HP somethingoranother printer and had an Epson RX300 before that. (It sucked up too much ink, though.)
I can use USB or parallel, whichever is more reliable. I am getting more and more frustrated with M/S and XP/SP2, and since I lost almost everything in a disk crash, now is the time to look more seriously at Linux, but I _must_ have working printing!!!
(If I could install and get hplip to work,
AFAIK, hplip only works on 10.0 or newer systems. I've not looked in awhile. It is a nice utility, tho.
I might be able to use my big HP Laser, that used to work with 10.0, but I've had no luck doing that. Any help would be appreciated. Do I have to download a different copy that isn't on the floppies from someplace, and if so, where? And how?
Dunno. By "big" do you mean an old HP LJIIIsi or a 9500hdn? -- kai Free Compean and Ramos http://www.grassfire.org/142/petition.asp http://www.perfectreign.com/?q=node/46 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Monday 30 April 2007 23:07, Kai Ponte wrote:
On Monday 30 April 2007 06:46:09 pm Doug McGarrett wrote:
I don't mean to piggyback on this thread, but it seems easiest, and is not really OT.
Yeah....right...
</jane curtian mode> I don't know who jane curtian might be, sorry--
Having had problems with printers in 9.3, which I intend to stay with until probably at least 6 months from now, I would like a recommendation for a low-cost laser that will absolutely work with this OS out of the box.
Well, my Epson CX3200 USB printer/scanner worked perfectly out of the box on 9.1 > 10.1. I've had no issues whatsoever. I have an HP 1380 at work (parallel) which works as well.
My mom's got a HP somethingoranother printer and had an Epson RX300 before that. (It sucked up too much ink, though.)
I can use USB or parallel, whichever is more reliable. I am getting more and more frustrated with M/S and XP/SP2, and since I lost almost everything in a disk crash, now is the time to look more seriously at Linux, but I _must_ have working printing!!!
(If I could install and get hplip to work,
AFAIK, hplip only works on 10.0 or newer systems. I've not looked in awhile. It is a nice utility, tho.
Maybe that's why I can't get the LJ 2200 to work on 9.3. It tries, but won't. And hplip is not loaded, and apparently won't.
I might be able to use my big HP Laser, that used to work with 10.0, but I've had no luck doing that. Any help would be appreciated. Do I have to download a different copy that isn't on the floppies from someplace, and if so, where? And how?
Dunno. By "big" do you mean an old HP LJIIIsi or a 9500hdn?
Well it's about that big, and does wonderful printing, just not from 9.3. For the mention from someone before about color lasers, I don't have the resources to support supplies, and I rather seldom have the need for color output. --doug
-- kai
Free Compean and Ramos http://www.grassfire.org/142/petition.asp http://www.perfectreign.com/?q=node/46
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Monday 30 April 2007 20:53, Doug McGarrett wrote:
On Monday 30 April 2007 23:07, Kai Ponte wrote:
On Monday 30 April 2007 06:46:09 pm Doug McGarrett wrote:
I don't mean to piggyback on this thread, but it seems easiest, and is not really OT.
Yeah....right...
</jane curtian mode>
I don't know who jane curtian might be, sorry--
SNL. Late 70s, early 80s. 3rd Rock From The Sun, late 90s. <http://www.imdb.com/name/nm0004852/> RRS -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Monday 2007-04-30 at 23:53 -0400, Doug McGarrett wrote:
Well it's about that big, and does wonderful printing, just not from 9.3.
Look up your model on www.linuxprinting.org. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGNxOYtTMYHG2NR9URAjVlAJ9vMC/3hZhPtb/1QxrJHCIqxlE/6gCgiV+3 OJuNlpahL92QQu/ZJiIz0tE= =sfic -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Monday 30 April 2007 08:53:37 pm Doug McGarrett wrote:
On Monday 30 April 2007 23:07, Kai Ponte wrote:
On Monday 30 April 2007 06:46:09 pm Doug McGarrett wrote:
I don't mean to piggyback on this thread, but it seems easiest, and is not really OT.
Yeah....right...
</jane curtian mode>
I don't know who jane curtian might be, sorry--
http://en.wikipedia.org/wiki/Jane_Curtin Sorry for the bad spelling. She is an actress who used to play a very sarcastic character on the US Show, Saturday Night Live, during the 1970s.
Having had problems with printers in 9.3, which I intend to stay with until probably at least 6 months from now, I would like a recommendation for a low-cost laser that will absolutely work with this OS out of the box.
Well, my Epson CX3200 USB printer/scanner worked perfectly out of the box on 9.1 > 10.1. I've had no issues whatsoever. I have an HP 1380 at work (parallel) which works as well.
My mom's got a HP somethingoranother printer and had an Epson RX300 before that. (It sucked up too much ink, though.)
I can use USB or parallel, whichever is more reliable. I am getting more and more frustrated with M/S and XP/SP2, and since I lost almost everything in a disk crash, now is the time to look more seriously at Linux, but I _must_ have working printing!!!
(If I could install and get hplip to work,
AFAIK, hplip only works on 10.0 or newer systems. I've not looked in awhile. It is a nice utility, tho.
Maybe that's why I can't get the LJ 2200 to work on 9.3. It tries, but won't. And hplip is not loaded, and apparently won't.
Keep in mind that printer drivers and port (usb/parallel) support has come a long way since 9.3. I noticed a huge improvement in 10.1, when they finally got the USB synching thingy fixed.
I might be able to use my big HP Laser, that used to work with 10.0, but I've had no luck doing that. Any help would be appreciated. Do I have to download a different copy that isn't on the floppies from someplace, and if so, where? And how?
Dunno. By "big" do you mean an old HP LJIIIsi or a 9500hdn?
Well it's about that big, and does wonderful printing, just not from 9.3. For the mention from someone before about color lasers, I don't have the resources to support supplies, and I rather seldom have the need for color output.
Understood. -- k i believe in what i'm doing but what is it i'm doing here? -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 5/1/07, Doug McGarrett <dmcgarrett@optonline.net> wrote:
Having had problems with printers in 9.3, which I intend to stay with until probably at least 6 months from now, I would like a recommendation for a low-cost laser that will absolutely work with this OS out of the box.
I have a Brother HL-2030, black and white USB laser printer that works perfectly with my system (I'm on 10.2, but was previously on 10.0 and before that on Mandrake 9.0 when I first bought the printer). It cost me 130€. Brother provide the Linux drivers, you install them with CUPS and everything works great. Note that I haven't tried it with SuSE 9.3. g -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Monday 30 April 2007 18:46, Doug McGarrett wrote:
(If I could install and get hplip to work, I might be able to use my big HP Laser, that used to work with 10.0, but I've had no luck doing that. Any help would be appreciated. Do I have to download a different copy that isn't on the floppies from someplace, and if so, where? And how?
--doug
I never had good things to say about all in one hardware, but you might look at the HPLIP stuff on sourceforge. http://hplip.sourceforge.net/ Bob. -- bob@rsmits.ca -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Doug McGarrett schrieb:
Having had problems with printers in 9.3, which I intend to stay with until probably at least 6 months from now, I would like a recommendation for a low-cost laser that will absolutely work with this OS out of the box. I can use USB or parallel, whichever is more reliable.
Define low cost? Maybe HP LeserJet 6L, to get at ebay for 20 Euro o so. If You need a color laser then maybe thecHP ColorJet 2605dn for 350 Euro. Both run with cups. Thx Jan -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Tuesday 2007-04-03 at 18:21 -0400, Doug McGarrett wrote:
lppasswd is your problem
man lppasswd
I have read man lppasswd but I don't know what to do next. It would appear from the error message that the username is doug, but it says on localhost, and the man lppasswd refers to cups, not localhost, or am I still missing something?
Yesterday I sent you some links that explain all this in detail. The cups system uses different passwords from the linux system, and till you add a password a user is denied access to control the printer. Not even root can access till he has defined a password for cups for his use (different from the one for the system, preferably). All these passwords are defined using lppasswd.
If I go to KJobViewer, I can delete everything queued but KDE Print System and KDE Print Test, which are owned by root. If I could find those files in a directory (where is it and what's it called?) I might be able to su and delete them also, and then maybe the system might work, I don't know.
You do not need to know where are those files stored, nor would that help you much. You simply tell root to remove those print jobs, using "lprm" or the web interface in <http://localhost:631/>, as I told you yesterday. Try! I can't believe that you haven't used that interface yet in all this time.
or search the opensuse list archives. It has been mentioned/described *many* times.
Hundreds, probably. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD4DBQFGEut8tTMYHG2NR9URArogAKCSCehzMz9AQAFkZhNpWbr8eRfhiACYgeat SOCsmOTTuMh9U0mVutFbeA== =TuJC -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Monday 2007-04-02 at 17:12 -0400, Doug McGarrett wrote:
Second printer problem: I would be happy to use my Laserjet, but for some reason the configuration says that YaST didn't set up HPLIP--it would seem that it can't--and when I try to test the configuration the print light on the Laserjet starts to flash, but it doesn't print anything either. This printer is connected via parallel port.
Sounds familiar, somehow. Search the list archive for mails from Johannes Meixner, going back to 2005. I'm sure one of them talks about this. Have a look here and around: <http://en.opensuse.org/SDB:CUPS_in_a_Nutshell> - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGEZ3UtTMYHG2NR9URAnlDAJ0WV4Vh37s3i50FnCM3vhXsIQwCTwCcDYtw NEKQ5qgASUkmSyvjeVpW31c= =eUM8 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (16)
-
Carlos E. R. -
Doug McGarrett -
German Guillot -
ianseeks -
Jan Tiggy -
Jos van Kan -
Joseph Loo -
Kai Ponte -
Kenneth Schneider -
lists Guillot -
Patrick Shanahan -
Rajko M. -
Randall R Schulz -
Robert Smits -
russbucket -
Verner Kjærsgaard