Have a new Microstar K7T Pro (MS-6330) with 750 MHz Socket A chip, Award Bios. 2 SCSI cards (2nd for diff tape drive), built in Sound, Nvidia AGP, 2 NIC's. In the Bios: Serial and parallel ports (irq 5) are on, USB off. PNP off (but have tried with it on). No ISA slots in this board. SCSI cards set to IRQ 7 & 8 respectively. NIC's are compiled into the kernel, 2.2.16 Puzzler is Bios assigns : IRQ 10 to SCSI card 1 and ETH0 IRQ 11 to SCSI card 2 and ETH1 System seems to work, but this doesn't look right, any ideas? -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq