Message-ID: <3A17A126.C9B8C62B@citeweb.net> Date: Sun, 19 Nov 2000 10:45:10 +0100 From: charlie ti <shadout@citeweb.net> Subject: CD writer problem Hi everybody when i start my computer i've got this error message for my CD writer (hdc) : <4>ATAPI device hdc: <4> Error: Not ready -- (Sense key=0x02) <4> (reserved error code) -- (asc=0x3a, ascq=0x01) <4> The failed "Read Cd/Dvd Capacity" packet command was: <4> "25 00 00 00 00 00 00 00 00 00 00 00 " what does it mean and how can i fix it? If necessary here is the all /var/log/boot.msg : Inspecting /boot/System.map-2.2.16 Loaded 9150 symbols from /boot/System.map-2.2.16. Symbols match kernel version 2.2.16. Loaded 7 symbols from 1 module. klogd 1.3-3, log source = ksyslog started. <4>Linux version 2.2.16 (root@Laptop.suse.de) (gcc version 2.95.2 19991024 (release)) #1 Wed Aug 2 20:03:33 GMT 2000 <4>Detected 501141 kHz processor. <4>Console: colour VGA+ 80x25 <4>Calibrating delay loop... 999.42 BogoMIPS <4>Memory: 257220k/262080k available (1460k kernel code, 416k reserved, 2916k data, 68k init, 0k bigmem) <4>Dentry hash table entries: 32768 (order 6, 256k) <4>Buffer cache hash table entries: 262144 (order 8, 1024k) <4>Page cache hash table entries: 65536 (order 6, 256k) <5>VFS: Diskquotas version dquot_6.4.0 initialized <4>CPU: Intel Pentium III (Katmai) stepping 03 <6>Checking 386/387 coupling... OK, FPU using exception 16 error reporting. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) <4>PCI: PCI BIOS revision 2.10 entry at 0xf08b0, last bus=1 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <6>Linux NET4.0 for Linux 2.2 <6>Based upon Swansea University Computer Society NET3.039 <6>NET4: Unix domain sockets 1.0 for Linux NET4.0. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <4>TCP: Hash tables configured (ehash 262144 bhash 65536) <4>Initializing RT netlink socket <4>Starting kswapd v 1.5 <6>Detected PS/2 Mouse Port. <4>pty: 256 Unix98 ptys configured <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13) <6>Real Time Clock Driver v1.09 <4>RAM disk driver initialized: 16 RAM disks of 64000K size <6>loop: registered device at major 7 <6>Uniform Multi-Platform E-IDE driver Revision: 6.30 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>PIIX4: IDE controller on PCI bus 00 dev 21 <4>PIIX4: chipset revision 1 <4>PIIX4: not 100% native mode: will probe irqs later <4> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio <4> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio <4>PDC20262: IDE controller on PCI bus 00 dev 68 <4>PDC20262: chipset revision 1 <4>PDC20262: not 100% native mode: will probe irqs later <4> ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:pio, hdf:pio <4> ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:pio, hdh:pio <4>hda: Pioneer DVD-ROM ATAPIModel DVD-103S 011, ATAPI CDROM drive <4>hdc: YAMAHA CRW4001, ATAPI CDROM drive <4>hde: IBM-DJNA-371350, ATA DISK drive <4>hdg: ST310210A, ATA DISK drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>ide2 at 0xb800-0xb807,0xb402 on irq 9 <4>ide3 at 0xb000-0xb007,0xa802 on irq 9 <6>hde: IBM-DJNA-371350, 12949MB w/1966kB Cache, CHS=26310/16/63 <6>hdg: ST310210A, 9729MB w/2048kB Cache, CHS=19767/16/63 <4>hda: ATAPI DVD-ROM drive, 512kB Cache <6>Uniform CD-ROM driver Revision: 3.11 <4>hdc: ATAPI 6X CD-ROM CD-R/RW drive, 2048kB Cache <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <6>LVM version 0.8e by Heinz Mauelshagen (4/1/2000) <4>lvm -- Driver successfully initialized <4>md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 <4>linear personality registered <4>raid0 personality registered <4>raid1 personality registered <4>raid5 personality registered <4>scsi0 : SCSI host adapter emulation for IDE ATAPI devices <4>scsi : 1 host. <4>scsi : detected total. <4>Partition check: <4>ATAPI device hdc: <4> Error: Not ready -- (Sense key=0x02) <4> (reserved error code) -- (asc=0x3a, ascq=0x01) <4> The failed "Read Cd/Dvd Capacity" packet command was: <4> "25 00 00 00 00 00 00 00 00 00 00 00 " <4> hde: [PTBL] [1027/255/63] hde1 hde2 < hde5 hde6 > <4> hdg: hdg1 hdg2 hdg3 hdg4 < hdg5 hdg6 > <4>VFS: Mounted root (ext2 filesystem) readonly. <4>Freeing unused kernel memory: 68k freed <6>Adding Swap: 130496k swap-space (priority -1) <6>Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Thanks charlie ti