Hello, I have a PCMCIA Ethernet card in my laptop for connecting via wire to a router and sometimes I use WLAN for connecting to a different provider via UMTS. The internal ethernet eth0 for my internal private network has a fixed 192.168.254.X address and fixed routing. The PCMCIA external ethernet has a fixed 10.0.0.X address since that fits with the internet router that I use when using wired connection to internet. Routing currently: Default IPv4 gateway is the 10.0.0.138 IP of my router where I connect wired. WLAN uses DHCP4 with a range of 192.168.123.0 to 192.168.123.254 which is routed to wlan0. The PCMCIA ==eth1 has fixed routing 10.0.0.0 , 255.255.255.0 and gateway 0.0.0.0 . The problem: when the PCMCIA is inserted, wlan0 does not work. As soon as I eject the PCMCIA eth1, wlan0 works again. My guess is, that the default gateway is a problem, surely I am missing an important point here, but I was not able to find a solution in Google. Question: Can I configure the default gateway dynamically? E.g. if I connect to wlan0 all internet traffic is send to the DHCP given 192.168.123.X and I can keep my PCMCIA inserted, when I turn off wlan0 and connect a cable to the PCMCIA, all internet traffic is routed to eth1. Some kind of "dynamic default gateway"? Thanks in advance Pete -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org