[opensuse] touchpad on asus laptop not recognized
Hi, The touchpad on my Asus GL552VW-CN113T is not recognized by leap. hwinfo --mouse only sees the USB mouse I have attached per cable, but not the touchpad: 32: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: MtLc.n6HbfhE0Bn4 Parent ID: k4bc.2DFUsyrieMD SysFS ID: /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0 SysFS BusID: 1-6:1.0 Hardware Class: mouse Model: "Logitech M-BJ58/M-BJ69 Optical Wheel Mouse" Hotplug: USB Vendor: usb 0x046d "Logitech, Inc." Device: usb 0xc00e "M-BJ58/M-BJ69 Optical Wheel Mouse" Revision: "11.10" Compatible to: int 0x0200 0x0001 "Generic USB Mouse" Driver: "usbhid" Driver Modules: "usbhid" Speed: 1.5 Mbps Module Alias: "usb:v046DpC00Ed1110dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: Buttons: 3 Wheels: 1 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #29 (Hub) when I unplug the USB mouse, hwinfo --mouse gives no output at all. gsynaptics and xf86-input-synaptics are installed... Any hints? Daniel -- Daniel Bauer photographer Basel Barcelona http://www.daniel-bauer.com room in Barcelona: https://www.airbnb.es/rooms/2416137 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On Wed, 2 Mar 2016 11:38:47 +0100 Daniel Bauer wrote:
Hi,
The touchpad on my Asus GL552VW-CN113T is not recognized by leap. 8< - - - - - snipped - - - - - >8
Any hints?
Daniel, I would merge this discussion into your original "How to get Nvidia Geforce GTX 960 M working?" thread. (I just replied to you there.) It's the same system and all of these issues are related. I think fragmenting the discussion will be less efficient and less helpful in the long run. YMMV regards, Carl -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Am 02.03.2016 um 13:46 schrieb Carl Hartung:
On Wed, 2 Mar 2016 11:38:47 +0100 Daniel Bauer wrote:
Hi,
The touchpad on my Asus GL552VW-CN113T is not recognized by leap. 8< - - - - - snipped - - - - - >8
Any hints?
Daniel,
I would merge this discussion into your original "How to get Nvidia Geforce GTX 960 M working?" thread. (I just replied to you there.) It's the same system and all of these issues are related. I think fragmenting the discussion will be less efficient and less helpful in the long run. YMMV
regards,
Carl
thanks for the input, Carl. I was tempted to put it there, but then I thought I'd "blow up" a thread and maybe not reach persons who know about touchpads, also (in case a solution would be found) it would be easier to find the thread on google - i thought... But you sure are right, and I should have titled the other thread "Asus laptop problems"... Anyway I think right now there is no solution for the touchpad as the hardware is not detected at all and it seems to be a kernel issue (according to what I read on my journeys through the web). I filed a bug on opensuse: https://bugzilla.opensuse.org/show_bug.cgi?id=969098 So, I have very little hope to get this solved soon, but one never knows: miracles happen and all hints are welcome :-) Daniel -- Daniel Bauer photographer Basel Barcelona http://www.daniel-bauer.com room in Barcelona: https://www.airbnb.es/rooms/2416137 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
participants (2)
-
Carl Hartung -
Daniel Bauer