[opensuse] OpenSuse 11 on a HP DL360 G5
Has anyone managed to get OpenSuse 11 working on a HP DL360 G5 After the install and reboot I get a pile of errors: Unable to handle kernel paging request Opps: 000 [#1] SMP Eventually it does boot but it looks like the network drivers also don't load The server has onboard netxTreme II BMC5708 cards. I've tried SLES10 SP1 which works 100 but not opensuse 11. I've also installed the latest HP firmware (8.1) - didn't make a difference? Any ideas? _________________________________________________________________ Keep your kids safer online with Windows Live Family Safety. http://www.windowslive.com/family_safety/overview.html?ocid=TXT_TAGLM_WL_fam... To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Greg McCarthy wrote:
Has anyone managed to get OpenSuse 11 working on a HP DL360 G5
Not on a G5, only on older Proliants so far.
After the install and reboot I get a pile of errors: Unable to handle kernel paging request Opps: 000 [#1] SMP
Eventually it does boot but it looks like the network drivers also don't load
The server has onboard netxTreme II BMC5708 cards.
I googled that a bit and got lots of hits on that. Seems to be covered by the bnx2 module, but without further info, there's no way of telling what went wrong. If I were you, I'd think about opening a problem report - maybe two separate ones, but I'd investigate things a bit further. For instance, the "pile of errors" - what exactly were they, and when/where did you see them. Same for the problems with your netword cards. /Per Jessen, Zürich -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Mon, 2008-07-21 at 11:23 +0000, Greg McCarthy wrote:
Has anyone managed to get OpenSuse 11 working on a HP DL360 G5 After the install and reboot I get a pile of errors: Unable to handle kernel paging request Opps: 000 [#1] SMP Eventually it does boot but it looks like the network drivers also don't load The server has onboard netxTreme II BMC5708 cards. I've tried SLES10 SP1 which works 100 but not opensuse 11. I've also installed the latest HP firmware (8.1) - didn't make a difference?
Well, i've managed to get 11.0 running on a dozen of DL320-G4, DL360-G4, DL385-G5. No un-accountable errors here. Did you check your media before installing? Any co-workers who don't know the meaning of "ESD"? I suggest to have mem-test runing for 24hours.. hw -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (3)
-
Greg McCarthy
-
Hans Witvliet
-
Per Jessen