Re: [SLE] DVD drive not recognised on 64 bit.
How do your drives jumpered on the ide cable? If they are drive select, change them to master/slave and check that the right module is talking to them. Sometimes it happens. Sometimes I just hang one drive per controller and that problem is solved that way. What does the dmesg output say about the ide controllers and the drives? How about the lsmod? When you finally get it working, what does the lsmod say? Adam -----Original Message----- From: michael norman <michaeltnorman@ukfsn.org> Subj: [SLE] DVD drive not recognised on 64 bit. Date: Tue Sep 20, 2005 8:48 am Size: 742 bytes To: suse-linux-e@suse.com Hi all I have just rebuilt my pc with an AMD Athlon 64 bit cpu on an Abit AV8 mb (VIA K8T800 chip). Using ethier the 32 or 64 bit version of 9.3 the and the same DVD drives (DVD on hdc and DVDRW on hdd) as before there is a failure to recognise the first drive once the machine is booted up. If I run system repair on reboot it is fixed but the recognition does not usually survive a reboot. I have checked the caable connections and they are OK. Anybody any ideas as to the cause of the problem please ? Mike -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
On Tuesday 20 September 2005 19:15, Adam Vazquez Kb2jpd Internet Mobile w/ Treo wrote:
How do your drives jumpered on the ide cable? If they are drive select, change them to master/slave and check that the right module is talking to them.
Sometimes it happens. Sometimes I just hang one drive per controller and that problem is solved that way.
What does the dmesg output say about the ide controllers and the drives? How about the lsmod?
When you finally get it working, what does the lsmod say?
Adam Adam
The drives are jumpered as before ie master and slave. from DMESG Probing IDE interface ide1... ide1: Wait for ready failed before probe ! hdd: DVD-RW IDE1008, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 321672960 sectors (164696 MB) w/1794KiB Cache, CHS=20023/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hdb: max request size: 1024KiB hdb: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 hdb2 hdb3 hdb4 hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Attempting manual resume from lsmod when not working ide_cd 37892 0 cdrom 36640 2 sr_mod,ide_cd ide_disk 16640 10 via82cxxx 11420 0 [permanent] ide_core 120020 3 ide_cd,ide_disk,via82cxxx I'll get it working again and post the lsmod output, but I need to reboot the machine to do that. Mike
participants (2)
-
Adam Vazquez Kb2jpd Internet Mobile w/ Treo -
michael norman