[opensuse] Internet and LibreOffice connections very slow
I was listening to a radio stream in Chromium yesterday and it started skipping. I switched to another station, and it took a long time to connect, but it played normally. All internet connections were slow after that. It took 10 seconds to connect to google.com. It takes a long time just to ping Google, like 13 seconds for 5 packets the first time. I assumed the issue was with my provider and did something else. I opened a text file I'd been editing earlier, and now it's taking 10 or 15 seconds to load. Same is happening for all texts and spreadsheets, unless I open them from recent documents in another file. Opening the files in Nautilus has this problem, too. Proxy is disabled in Firefox, Chromium and LibreOffice. All three are very slow to open and connect. I didn't do any updates or install software yesterday, or make system changes. It's strange, it was almost like it sputtered, and broke down.But how do I disable remote services in LibreOffice, and can somebody guess what would bring this on? I've got Leap 15.1, GNOME 3.26.2, LibreOffice 6.4.5. Jon Cosby -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
* Jon Cosby <lists@seablues.net> [10-16-20 14:10]:
I was listening to a radio stream in Chromium yesterday and it started skipping. I switched to another station, and it took a long time to connect, but it played normally. All internet connections were slow after that. It took 10 seconds to connect to google.com. It takes a long time just to ping Google, like 13 seconds for 5 packets the first time. I assumed the issue was with my provider and did something else. I opened a text file I'd been editing earlier, and now it's taking 10 or 15 seconds to load. Same is happening for all texts and spreadsheets, unless I open them from recent documents in another file. Opening the files in Nautilus has this problem, too.
Proxy is disabled in Firefox, Chromium and LibreOffice. All three are very slow to open and connect. I didn't do any updates or install software yesterday, or make system changes. It's strange, it was almost like it sputtered, and broke down.But how do I disable remote services in LibreOffice, and can somebody guess what would bring this on? I've got Leap 15.1, GNOME 3.26.2, LibreOffice 6.4.5.
check free -m probably memory leak, bad memory or running out of swap space, or running from swap space -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 2020-10-16 11:16, Patrick Shanahan wrote:
* Jon Cosby <lists@seablues.net> [10-16-20 14:10]:
I was listening to a radio stream in Chromium yesterday and it started skipping. I switched to another station, and it took a long time to connect, but it played normally. All internet connections were slow after that. It took 10 seconds to connect to google.com. It takes a long time just to ping Google, like 13 seconds for 5 packets the first time. I assumed the issue was with my provider and did something else. I opened a text file I'd been editing earlier, and now it's taking 10 or 15 seconds to load. Same is happening for all texts and spreadsheets, unless I open them from recent documents in another file. Opening the files in Nautilus has this problem, too.
Proxy is disabled in Firefox, Chromium and LibreOffice. All three are very slow to open and connect. I didn't do any updates or install software yesterday, or make system changes. It's strange, it was almost like it sputtered, and broke down.But how do I disable remote services in LibreOffice, and can somebody guess what would bring this on? I've got Leap 15.1, GNOME 3.26.2, LibreOffice 6.4.5.
check free -m
probably memory leak, bad memory or running out of swap space, or running from swap space
My swap partition is small, but it doesn't go there very often. free -m total used free shared buff/cache available Mem: 32077 2896 24693 265 4487 28460 Swap: 6143 0 6143 Jon -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
* Jon Cosby <lists@seablues.net> [10-16-20 14:24]: [...]
My swap partition is small, but it doesn't go there very often.
free -m total used free shared buff/cache available Mem: 32077 2896 24693 265 4487 28460 Swap: 6143 0 6143
then open top or htop in a ?term window and watch it as you experience slowness it should show you where the bottleneck is. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 2020-10-16 11:27, Patrick Shanahan wrote:
* Jon Cosby <lists@seablues.net> [10-16-20 14:24]:
[...]
My swap partition is small, but it doesn't go there very often.
free -m total used free shared buff/cache available Mem: 32077 2896 24693 265 4487 28460 Swap: 6143 0 6143
then open top or htop in a ?term window and watch it as you experience slowness
it should show you where the bottleneck is.
I don't see anything bottling things up. The thing is, the internet connection slowed down at the same time this started. It takes 13 seconds to ping 5 packets to google.com. I think the problem is related. LO seems to be connecting to a remote server, even though I have usage data disabled. Jon -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 16/10/2020 21.25, Jon Cosby wrote:
On 2020-10-16 11:27, Patrick Shanahan wrote:
* Jon Cosby <> [10-16-20 14:24]:
[...]
My swap partition is small, but it doesn't go there very often.
free -m total used free shared buff/cache available Mem: 32077 2896 24693 265 4487 28460 Swap: 6143 0 6143
then open top or htop in a ?term window and watch it as you experience slowness
it should show you where the bottleneck is.
I don't see anything bottling things up. The thing is, the internet connection slowed down at the same time this started. It takes 13 seconds to ping 5 packets to google.com. I think the problem is related. LO seems to be connecting to a remote server, even though I have usage data disabled.
reboot? -- Cheers / Saludos, Carlos E. R. (from 15.1 x86_64 at Telcontar)
On 2020-10-16 12:45, Carlos E. R. wrote:
On 16/10/2020 21.25, Jon Cosby wrote:
On 2020-10-16 11:27, Patrick Shanahan wrote:
* Jon Cosby <> [10-16-20 14:24]:
[...]
My swap partition is small, but it doesn't go there very often.
free -m total used free shared buff/cache available Mem: 32077 2896 24693 265 4487 28460 Swap: 6143 0 6143
then open top or htop in a ?term window and watch it as you experience slowness
it should show you where the bottleneck is.
I don't see anything bottling things up. The thing is, the internet connection slowed down at the same time this started. It takes 13 seconds to ping 5 packets to google.com. I think the problem is related. LO seems to be connecting to a remote server, even though I have usage data disabled.
reboot?
Thanks. I rebooted the modem. Jon -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
* Jon Cosby <lists@seablues.net> [10-16-20 16:11]:
On 2020-10-16 12:45, Carlos E. R. wrote:
On 16/10/2020 21.25, Jon Cosby wrote:
On 2020-10-16 11:27, Patrick Shanahan wrote:
* Jon Cosby <> [10-16-20 14:24]:
[...]
My swap partition is small, but it doesn't go there very often.
free -m total used free shared buff/cache available Mem: 32077 2896 24693 265 4487 28460 Swap: 6143 0 6143
then open top or htop in a ?term window and watch it as you experience slowness
it should show you where the bottleneck is.
I don't see anything bottling things up. The thing is, the internet connection slowed down at the same time this started. It takes 13 seconds to ping 5 packets to google.com. I think the problem is related. LO seems to be connecting to a remote server, even though I have usage data disabled.
reboot?
Thanks. I rebooted the modem.
Solved problem? -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 2020-10-16 13:17, Patrick Shanahan wrote:
* Jon Cosby <lists@seablues.net> [10-16-20 16:11]:
On 2020-10-16 12:45, Carlos E. R. wrote:
On 16/10/2020 21.25, Jon Cosby wrote:
On 2020-10-16 11:27, Patrick Shanahan wrote:
* Jon Cosby <> [10-16-20 14:24]:
[...]
My swap partition is small, but it doesn't go there very often.
free -m total used free shared buff/cache available Mem: 32077 2896 24693 265 4487 28460 Swap: 6143 0 6143
then open top or htop in a ?term window and watch it as you experience slowness
it should show you where the bottleneck is.
I don't see anything bottling things up. The thing is, the internet connection slowed down at the same time this started. It takes 13 seconds to ping 5 packets to google.com. I think the problem is related. LO seems to be connecting to a remote server, even though I have usage data disabled.
reboot?
Thanks. I rebooted the modem.
Solved problem?
Yes it did. Jon -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 2020-10-16 13:22, Jon Cosby wrote:
On 2020-10-16 13:17, Patrick Shanahan wrote:
* Jon Cosby <lists@seablues.net> [10-16-20 16:11]:
On 2020-10-16 12:45, Carlos E. R. wrote:
On 16/10/2020 21.25, Jon Cosby wrote:
On 2020-10-16 11:27, Patrick Shanahan wrote:
* Jon Cosby <> [10-16-20 14:24]:
[...] > My swap partition is small, but it doesn't go there very often. > > free -m > total used free shared > buff/cache available > Mem: 32077 2896 24693 > 265 4487 28460 > Swap: 6143 0 6143
then open top or htop in a ?term window and watch it as you experience slowness
it should show you where the bottleneck is.
I don't see anything bottling things up. The thing is, the internet connection slowed down at the same time this started. It takes 13 seconds to ping 5 packets to google.com. I think the problem is related. LO seems to be connecting to a remote server, even though I have usage data disabled.
reboot?
Thanks. I rebooted the modem.
Solved problem?
Yes it did.
I'd like to know why LO needs to connect when the data usage reporting is disabled, though. Jon -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 16/10/2020 14:27, Patrick Shanahan wrote:
* Jon Cosby <lists@seablues.net> [10-16-20 14:24]:
[...]
My swap partition is small, but it doesn't go there very often.
free -m total used free shared buff/cache available Mem: 32077 2896 24693 265 4487 28460 Swap: 6143 0 6143
then open top or htop in a ?term window and watch it as you experience slowness
it should show you where the bottleneck is.
Possibly. Possibly not. Jon said
All internet connections were slow after that. It took 10 seconds to connect to google.com. It takes a long time just to ping Google, like 13 seconds for 5 packets the first time.
If it were the internet ALONE then I'd wonder about problems establishing a connection, possibly due to DNS issues, which 'top' would say noting about. I began life in the UNIX 5,6,7 days before there was a network connection. Now we are so tied in to networking we use it places where a previous generation would not think of doing so. So many UNIX Host network connections, DBUS connections, established at start-up. Maybe even some applications checking out services on the Internet at start-up, and DNS delay issues. Maybe. Sometimes you'd have to check with the source code to find out. And maybe that's obscure. Not all of use have to coding/language skills to be able to do that. I'm sure that tools like 'netstat' would be useful. I have an xterm with 'iftop' running, but it isn't useful for things that get 'blocked', only for things that actually move along. The same might be said for 'top' and 'htop'. If you are looking to traffic rather than specific programs that I'd recommend vimstat. I have an xterm with 'vmstat -SM -a 15' running. You might also look up what a 'slab' of memory is and how having lots of free memory you can't actually use it. -- “Reality is so complex, we must move away from dogma, whether it’s conspiracy theories or free-market,” -- James Glattfelder. http://jth.ch/jbg -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 17/10/2020 01.27, Anton Aylward wrote:
On 16/10/2020 14:27, Patrick Shanahan wrote:
* Jon Cosby <> [10-16-20 14:24]:
I'm sure that tools like 'netstat' would be useful. I have an xterm with 'iftop' running, but it isn't useful for things that get 'blocked', only for things that actually move along. The same might be said for 'top' and 'htop'. If you are looking to traffic rather than specific programs that I'd recommend vimstat. I have an xterm with 'vmstat -SM -a 15' running.
Where do you get it from? not listed. Ah, the second time you write *vmstat* -- Cheers / Saludos, Carlos E. R. (from 15.1 x86_64 at Telcontar)
On 17/10/2020 06:36, Carlos E. R. wrote:
On 17/10/2020 01.27, Anton Aylward wrote:
On 16/10/2020 14:27, Patrick Shanahan wrote:
* Jon Cosby <> [10-16-20 14:24]:
I'm sure that tools like 'netstat' would be useful. I have an xterm with 'iftop' running, but it isn't useful for things that get 'blocked', only for things that actually move along. The same might be said for 'top' and 'htop'. If you are looking to traffic rather than specific programs that I'd recommend vimstat. I have an xterm with 'vmstat -SM -a 15' running.
Where do you get it from? not listed.
Ah, the second time you write *vmstat*
Two separate tools showing two separate things. main:~ # apropos vmstat vmstat (8) - Report virtual memory statistics main:~ # apropos netstat netstat (8) - Print network connections, routing tables, interface statistics, masquerade connections,... What do I get WHAT from? WHAT isn't listed? -- “Reality is so complex, we must move away from dogma, whether it’s conspiracy theories or free-market,” -- James Glattfelder. http://jth.ch/jbg -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 17/10/2020 13.55, Anton Aylward wrote:
On 17/10/2020 06:36, Carlos E. R. wrote:
On 17/10/2020 01.27, Anton Aylward wrote:
On 16/10/2020 14:27, Patrick Shanahan wrote:
* Jon Cosby <> [10-16-20 14:24]:
I'm sure that tools like 'netstat' would be useful. I have an xterm with 'iftop' running, but it isn't useful for things that get 'blocked', only for things that actually move along. The same might be said for 'top' and 'htop'. If you are looking to traffic rather than specific programs that I'd recommend vimstat. I have an xterm with 'vmstat -SM -a 15' running. ..............********
Where do you get it from? not listed.
Ah, the second time you write *vmstat*
Two separate tools showing two separate things.
main:~ # apropos vmstat vmstat (8) - Report virtual memory statistics main:~ # apropos netstat netstat (8) - Print network connections, routing tables, interface statistics, masquerade connections,...
What do I get WHAT from? WHAT isn't listed?
vimstat. -- Cheers / Saludos, Carlos E. R. (from 15.1 x86_64 at Telcontar)
participants (4)
-
Anton Aylward -
Carlos E. R. -
Jon Cosby -
Patrick Shanahan