Suse/Apache ... help please !!!!!
HI All, My server is located in San Diego CA. We had to yank the server from the building it was in because of the threat of fire... The fire was one street over!! Fortunatlely the SDFD was able to ward off the flames and the building was saved.. After plugging our server back in and trying to start apache ... I am receiving the following error: Starting httpd [ Mailman PHP4 ]stty: standard input: Inappropriate ioctl for device ..failed I don't understand... nothing has changed! I have never received this error before?? Note: I have not logged in from the machine itself... only through webmin... sendmail works, qpopper works... Any ideas? Paul
Can anyone help please... Can't find any answers googling around... -paul HI All, My server is located in San Diego CA. We had to yank the server from the building it was in because of the threat of fire... The fire was one street over!! Fortunatlely the SDFD was able to ward off the flames and the building was saved.. After plugging our server back in and trying to start apache ... I am receiving the following error: Starting httpd [ Mailman PHP4 ]stty: standard input: Inappropriate ioctl for device ..failed I don't understand... nothing has changed! I have never received this error before?? Note: I have not logged in from the machine itself... only through webmin... sendmail works, qpopper works... Any ideas? Paul
On Tue, Oct 28, 2003 at 06:08:27PM -0800, Paul Agner wrote:
Starting httpd [ Mailman PHP4 ]stty: standard input: Inappropriate ioctl for device ..failed
Nothing to worry about, a cosmetical error message that has been fixed in later releases. It occurs for example when you use YaST2's runlevel editor to start apache. Peter
HI there, thanks for your reply... Unfortunately Apache does not run after receiving this error... any ideas? ----- Original Message ----- From: <poeml@cmdline.net> To: <suse-linux-e@suse.com> Sent: Wednesday, October 29, 2003 6:32 AM Subject: Re: [SLE] Suse/Apache ... help please !!!!! On Tue, Oct 28, 2003 at 06:08:27PM -0800, Paul Agner wrote:
Starting httpd [ Mailman PHP4 ]stty: standard input: Inappropriate ioctl for device ..failed
Nothing to worry about, a cosmetical error message that has been fixed in later releases. It occurs for example when you use YaST2's runlevel editor to start apache. Peter
On Wed, Oct 29, 2003 at 06:57:45AM -0800, Paul Agner wrote:
HI there, thanks for your reply... Unfortunately Apache does not run after receiving this error... any ideas? [...]
Starting httpd [ Mailman PHP4 ]stty: standard input: Inappropriate ioctl for device ..failed
Nothing to worry about, a cosmetical error message that has been fixed in later releases. It occurs for example when you use YaST2's runlevel editor to start apache.
The error is not related. At any rate, check the logs. If the machine don't run, you need to read the gauges! Attach a diagnostic apparillo ("tail -f /var/log/httpd/*_log &") and give it a good kicking with "rcapache restart"! You can post relevant parts here. Peter
Thanks Peter, I looked at the error log and found out the problem .... For some reason when i reboot; the host name got chopped off... rather than saying bidmonkey.com it just said bidmonkey .... strange ... the server had been up and running for 6 months at least; since last reboot.... When I was previously looking at the network config; I saw bidmonkey there; and it looked right... so I assumed there was no problem there... -Paul At any rate, check the logs. If the machine don't run, you need to read the gauges! Attach a diagnostic apparillo ("tail -f /var/log/httpd/*_log &") and give it a good kicking with "rcapache restart"! You can post relevant parts here. Peter ----- Original Message ----- From: <poeml@cmdline.net> To: <suse-linux-e@suse.com> Sent: Wednesday, October 29, 2003 3:46 PM Subject: Re: [SLE] Suse/Apache ... help please !!!!!
Hi folks Am running suse linux pro. 8.2 Currently i have one network card Installed on it! I would like to add a second network card, "DFE 538TX " I have tried installing from network card Configuration and selecting from the list but it does not exit. Please what do i need do !! Am not a Linux Guru/expert. please help Thanks larry
On 10/29/2003 11:41 PM, larry wrote:
Am running suse linux pro. 8.2 Currently i have one network card Installed on it! I would like to add a second network card, "DFE 538TX " I have tried installing from network card Configuration and selecting from the list but it does not exit. Please what do i need do !! Am not a Linux Guru/expert.
First install the card. I'll assume it is a pci card, and that your BIOS recognizes it. Assuming hwscan doesn't detect it automatically, open Yast, Network Devices, Network Card. According to http://support.dlink.com/faq/view.asp?prod_id=487&question=General%20Linux, it uses the rtl8139.o module. If it is not detected, click on Configure, ensure it is set for Ethernet, 1, put rtl8139 in the kernel module name field, next configure as needed. HTH. -- Joe Morris New Tribes Mission Email Address: Joe_Morris@ntm.org Web Address: http://www.mydestiny.net/~joe_morris Registered Linux user 231871 God said, I AM that I AM. I say, by the grace of God, I am what I am.
Sorry for posting this again... I am hoping someone who didn't see it last night can help me with it today... My server is located in San Diego CA. We had to yank the server from the building it was in because of the threat of fire... The fire was one street over!! Fortunatlely the SDFD was able to ward off the flames and the building was saved.. After plugging our server back in and trying to start apache ... I am receiving the following error: Starting httpd [ Mailman PHP4 ]stty: standard input: Inappropriate ioctl for device ..failed I don't understand... nothing has changed! I have never received this error before?? Note: I have not logged in from the machine itself... only through webmin... sendmail works, qpopper works... Any ideas? Paul
participants (4)
-
Joe Morris (NTM) -
larry -
Paul Agner -
poeml＠cmdline.net