A friend of mine has a problem when he inserts his memory stick, it
tends to open multiple windows. DMESG shows that the device
disconnects then reconnects automatically. He is currently running SuSE
10.2/GNome, but this has occurred with other Linux distros on his
system and with KDE. This occurs with different memory stick.
I've also had him turn off the firewall and switch to run level 3. In
run level 3, the device is stable. Here is a bit from the dmesg. I'm
looking for some ideas.
usb 4-6: new high speed USB device using ehci_hcd and address 3
usb 4-6: new device found, idVendor=08ec, idProduct=0008
usb 4-6: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-6: Product: TD Classic 003C
usb 4-6: Manufacturer: Memorex
usb 4-6: SerialNumber: 0AC14A61003368C6
usb 4-6: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: Memorex Model: TD Classic 003C Rev: 5.00
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sdc: 2015232 512-byte hdwr sectors (1032 MB)
sdc: Write Protect is off
sdc: Mode Sense: 23 00 00 00
sdc: assuming drive cache: write through
SCSI device sdc: 2015232 512-byte hdwr sectors (1032 MB)
sdc: Write Protect is off
sdc: Mode Sense: 23 00 00 00
sdc: assuming drive cache: write through
sdc: sdc1
sd 2:0:0:0: Attached scsi removable disk sdc
sd 2:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
usb 4-6: USB disconnect, address 3
usb 4-6: new high speed USB device using ehci_hcd and address 4
usb 4-6: new device found, idVendor=08ec, idProduct=0008
usb 4-6: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-6: Product: TD Classic 003C
usb 4-6: Manufacturer: Memorex
usb 4-6: SerialNumber: 0AC14A61003368C6
usb 4-6: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
Vendor: Memorex Model: TD Classic 003C Rev: 5.00
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sdc: 2015232 512-byte hdwr sectors (1032 MB)
sdc: Write Protect is off
sdc: Mode Sense: 23 00 00 00
sdc: assuming drive cache: write through
SCSI device sdc: 2015232 512-byte hdwr sectors (1032 MB)
sdc: Write Protect is off
sdc: Mode Sense: 23 00 00 00
sdc: assuming drive cache: write through
sdc: sdc1
sd 3:0:0:0: Attached scsi removable disk sdc
sd 3:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
usb 4-6: USB disconnect, address 4
--
Jerry Feldman
On Saturday 07 April 2007 10:20, Jerry Feldman wrote:
A friend of mine has a problem when he inserts his memory stick, it tends to open multiple windows. DMESG shows that the device disconnects then reconnects automatically. He is currently running SuSE 10.2/GNome, but this has occurred with other Linux distros on his system and with KDE. This occurs with different memory stick. I've also had him turn off the firewall and switch to run level 3. In run level 3, the device is stable. Here is a bit from the dmesg. I'm looking for some ideas.
Vendor: Memorex Model: TD Classic 003C Rev: 5.00
I have had the same problem with a Memorex TD Classic 1GB memory stick on a Sony Vaio running 10.1, but it works perfect on my Dell C521. I think in my case it's a hardware thing on the Sony, I think the Sony is USB 1.1 and the memory stick is 2.0, it shouldn't make a differance but who knows. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sat, 7 Apr 2007 10:20:22 -0400
Jerry Feldman
A friend of mine has a problem when he inserts his memory stick, it tends to open multiple windows. DMESG shows that the device disconnects then reconnects automatically. He is currently running SuSE 10.2/GNome, but this has occurred with other Linux distros on his system and with KDE. I had run a few test, and apparently the same thing happens even in single-user mode, so I'm sure it is hardware. He also has an IOMEGA Zip drive that runs fine. P4-2000-512K (Pentium4 2.00 GHz/512k BASE)
ASUS P4B533E P4 MB, (1394, USB2, LAN, RAID, aud)
256 MB CL2.5 DDR RAM
(512MB PC3200 184 pin DDR DIMM Memory Module added later: )
ATI Radeon 7500 64m DDR video card
ka1ifq
participants (2)
-
Jerry Feldman
-
ka1ifq