i'm trying to configure diald to use wvdial to connect. i don't know if this is possible. anyway, after editing the /etc/diald.conf to use wvdial (connect wvdial), i get disconnected after i connect. the following is the /var/log/messages file associated with this connection: -----------------------start-------------------- Jan 1 19:23:58 alpha diald[10181]: Trigger: udp 192.168.1.1/1037 128.135.4.2/53 Jan 1 19:23:58 alpha diald[10181]: Calling site 128.135.4.2 Jan 1 19:23:59 alpha diald[10181]: connector: --> WvDial: Internet dialer version 1.20 Jan 1 19:23:59 alpha diald[10181]: connector: --> Initializing modem. Jan 1 19:23:59 alpha diald[10181]: connector: --> Sending: ATZ Jan 1 19:23:59 alpha diald[10181]: connector: ATZ Jan 1 19:23:59 alpha diald[10181]: connector: OK Jan 1 19:23:59 alpha diald[10181]: connector: --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0 Jan 1 19:23:59 alpha diald[10181]: connector: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0 Jan 1 19:23:59 alpha diald[10181]: connector: OK Jan 1 19:23:59 alpha diald[10181]: connector: --> Modem initialized. Jan 1 19:23:59 alpha diald[10181]: connector: --> Sending: ATDT 17739261600 Jan 1 19:23:59 alpha diald[10181]: connector: --> Waiting for carrier. Jan 1 19:23:59 alpha diald[10181]: connector: ATDT 17739261600 Jan 1 19:24:33 alpha last message repeated 2 times Jan 1 19:24:33 alpha pppd[10213]: rcvd [LCP ConfReq id=0x19 <asyncmap 0xa0000> <auth pap> <magic 0x40d4aaa2> <pcomp> <accomp>] Jan 1 19:24:33 alpha pppd[10213]: sent [LCP ConfAck id=0x19 <asyncmap 0xa0000> <auth pap> <magic 0x40d4aaa2> <pcomp> <accomp>] Jan 1 19:24:36 alpha pppd[10213]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x9956ef5b> <pcomp> <accomp>] Jan 1 19:24:36 alpha pppd[10213]: rcvd [LCP ConfReq id=0x1a <asyncmap 0xa0000> <auth pap> <magic 0x40d4b865> <pcomp> <accomp>] Jan 1 19:24:36 alpha pppd[10213]: sent [LCP ConfAck id=0x1a <asyncmap 0xa0000> <auth pap> <magic 0x40d4b865> <pcomp> <accomp>] Jan 1 19:24:36 alpha pppd[10213]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x9956ef5b> <pcomp> <accomp>] Jan 1 19:24:36 alpha pppd[10213]: sent [LCP EchoReq id=0x0 magic=0x9956ef5b] Jan 1 19:24:36 alpha pppd[10213]: sent [PAP AuthReq id=0x1 user="xxxxxxx" password="xxxxxxxxxx"] Jan 1 19:24:36 alpha pppd[10213]: rcvd [LCP EchoRep id=0x0 magic=0x40d4b865] Jan 1 19:24:37 alpha pppd[10213]: rcvd [PAP AuthAck id=0x1 ""] Jan 1 19:24:37 alpha pppd[10213]: Remote message: M-TM-8e Jan 1 19:24:37 alpha pppd[10213]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>] Jan 1 19:24:37 alpha pppd[10213]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>] Jan 1 19:24:37 alpha pppd[10213]: rcvd [IPCP ConfReq id=0xe <compress VJ 0f 00> <addr 128.135.229.1>] Jan 1 19:24:37 alpha pppd[10213]: sent [IPCP ConfAck id=0xe <compress VJ 0f 00> <addr 128.135.229.1>] Jan 1 19:24:37 alpha pppd[10213]: rcvd [IPCP ConfNak id=0x1 <addr 128.135.229.25> <ms-dns1 128.135.12.73> <ms-dns3 128.135.4.2>] Jan 1 19:24:37 alpha pppd[10213]: sent [IPCP ConfReq id=0x2 <addr 128.135.229.25> <compress VJ 0f 01> <ms-dns1 128.135.12.73> <ms-dns3 128.135.4.2>] Jan 1 19:24:37 alpha pppd[10213]: rcvd [LCP ProtRej id=0x1b 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f] Jan 1 19:24:37 alpha pppd[10213]: rcvd [IPCP ConfAck id=0x2 <addr 128.135.229.25> <compress VJ 0f 01> <ms-dns1 128.135.12.73> <ms-dns3 128.135.4.2>] Jan 1 19:24:37 alpha pppd[10213]: local IP address 128.135.229.25 Jan 1 19:24:37 alpha pppd[10213]: remote IP address 128.135.229.1 Jan 1 19:24:37 alpha pppd[10213]: primary DNS address 128.135.12.73 Jan 1 19:24:37 alpha pppd[10213]: secondary DNS address 128.135.4.2 Jan 1 19:24:37 alpha pppd[10213]: Script /etc/ppp/ip-up started (pid 10214) Jan 1 19:24:37 alpha ip-up: Modified /etc/resolv.conf for DNS at ppp0 Jan 1 19:24:37 alpha pppd[10213]: Script /etc/ppp/ip-up finished (pid 10214), status = 0x0 Jan 1 19:24:58 alpha diald[10181]: Connect script timed out. Killing script. Jan 1 19:24:58 alpha diald[10181]: Sending SIGINT to (dis)connect process 10212 Jan 1 19:24:58 alpha pppd[10213]: Terminating on signal 15. Jan 1 19:24:58 alpha pppd[10213]: Script /etc/ppp/ip-down started (pid 10223) Jan 1 19:24:58 alpha pppd[10213]: sent [LCP TermReq id=0x2 "User request"] Jan 1 19:24:58 alpha pppd[10213]: rcvd [LCP TermAck id=0x2] Jan 1 19:24:58 alpha pppd[10213]: Connection terminated. Jan 1 19:24:58 alpha pppd[10213]: Connect time 0.6 minutes. Jan 1 19:24:58 alpha pppd[10213]: Sent 508 bytes, received 487 bytes. Jan 1 19:24:58 alpha pppd[10213]: Waiting for 1 child processes... Jan 1 19:24:58 alpha pppd[10213]: script /etc/ppp/ip-down, pid 10223 Jan 1 19:24:58 alpha ip-down: Restored original /etc/resolv.conf Jan 1 19:24:58 alpha pppd[10213]: Script /etc/ppp/ip-down finished (pid 10223), status = 0x0 Jan 1 19:24:58 alpha pppd[10213]: Exit. Jan 1 19:24:58 alpha diald[10181]: connector: --> Disconnecting at Sat Jan 1 19:24:58 2000 Jan 1 19:24:59 alpha diald[10181]: Delaying 30 seconds before clear to dial. ------------------end--------------- what's happening here? it looks like the "connect script is timimg out". any thoughts? -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
"Mac Q. Flores IV" wrote:
i'm trying to configure diald to use wvdial to connect.
Instead of doing that, see: http://sdb.suse.de/sdb/en/html/hoe_wv_dod_start.html This tells you how to use wvdial and pppd to get demand dialing. I had to modify the script due to problems with the way it was put on the web page (line breaks, etc.) and for a couple of other things. See my version at: http://paulsen.home.texas.net/wvdial.dod See my comments near the beginning of the script. Since I got this working, I have stopped using diald. Things are working great, at least on my SuSE 6.3 system. You might want to also investigate the new firewals package (sec group) that is in 6.3. Since there is an update on the SuSE web page you can download that to see if it works with your 6.2. -- ____________________________________________________________________ Robert Paulsen http://paulsen.home.texas.net -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
participants (2)
-
mflores＠uchicago.edu -
paulsen＠texas.net