Re: [SLE] Lucent winmodem
On Sun, 04 Feb 2001, you wrote:
On Sun, 04 Feb 2001, you wrote:
Just change the line
MODEM="/dev/ttyS0"
in /etc/rc.config to point to /dev/ttyLT0 instead, and you can keep using suseconfig :-)
- -tosi etc. etc.
Thanks for this very good tip which saves a lot of bother. By the way I wrongly stated that the Lucent modem used /dev/ttyL0 - it was using /dev/ttyS14 in fact. The 'Current value' shown by Yast was /dev/ttyS2 ! I changed it via Yast/System Administration/Change configuration file/MODEM/ F3<Change value> and after it finished double checked to make sure. Good tip for Mark too !! Bye now
On Sun, 04 Feb 2001, you wrote:
I changed it via Yast/System Administration/Change configuration file/MODEM/ F3<Change value> and after it finished double checked to make sure.
Good tip for Mark too !!
Bye now
Thanks Roy This worked fine on my system too. I noticed that the default Modem setting pointed at 'Ask_Yast'. This was probably causing all the confusion. After changing to /dev/ttyS14 all is well. Thanks to all on the list who so quickly respond. Mark -- Mark R. Annandale SuSE Linux 7.0 Kmail 1.0.29.2
participants (2)
-
Mark Annandale
-
Roy Leembruggen