Thank you for your interest. Here it is: -[0000:00]-+-00.0 Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub +-02.0 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller +-02.1 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller +-1a.0 Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 +-1a.1 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 +-1a.7 Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 +-1b.0 Intel Corporation 82801H (ICH8 Family) HD Audio Controller +-1c.0-[0000:04-07]----00.0 Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller +-1c.1-[0000:08-0f]-- +-1c.3-[0000:14-17]----00.0 Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection +-1d.0 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 +-1e.0-[0000:1c-24]--+-03.0 O2 Micro, Inc. OZ711SP1 Memory CardBus Controller | +-03.1 O2 Micro, Inc. OZ711SP1 Memory CardBus Controller | +-03.2 O2 Micro, Inc. Integrated MMC/SD Controller | \-03.3 O2 Micro, Inc. Integrated MS/xD Controller +-1f.0 Intel Corporation 82801HEM (ICH8M) LPC Interface Controller +-1f.1 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller +-1f.2 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller \-1f.3 Intel Corporation 82801H (ICH8 Family) SMBus Controller --- On Thu, 7/17/08, clarkt@cnsp.com wrote:

...

I'm having problems with the sd card reader on my Fujitsu Siemens Lifebook E8310 laptop.

I see on the net that there are various problems with

From: clarkt@cnsp.com Subject: Re: [opensuse] MMC driver problems on Suse 10.3 (sd card reader) To: cts.private@yahoo.com Cc: opensuse@opensuse.org Date: Thursday, July 17, 2008, 7:14 AM the device and

...

various groups working on them.

I'd like to get the most recent version of the same driver that Suse put into it's 10.3 release.

Can anyone point me to Suse's source?

The problems I'm having are: - after a while, and/or certain events (power saving mode?), I lose my mount - or I can't mount the card anymore. - now, I don't even get a udev event anymore (did I muck up something in the configuration?)

Please do a lspci -vt and post the output to help identify the chipset.

Clark

-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

--- On Thu, 7/17/08, clarkt@cnsp.com wrote:

...

Thank you for your interest. Here it is:

-[0000:00]-+-00.0 Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub +-02.0 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller +-02.1 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller +-1a.0 Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 +-1a.1 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 +-1a.7 Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 +-1b.0 Intel Corporation 82801H (ICH8 Family) HD Audio Controller +-1c.0-[0000:04-07]----00.0 Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller +-1c.1-[0000:08-0f]-- +-1c.3-[0000:14-17]----00.0 Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection +-1d.0 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 +-1e.0-[0000:1c-24]--+-03.0 O2 Micro, Inc. OZ711SP1 Memory CardBus Controller | +-03.1 O2 Micro, Inc. OZ711SP1 Memory CardBus Controller | +-03.2 O2 Micro, Inc. Integrated MMC/SD Controller | \-03.3 O2 Micro, Inc. Integrated MS/xD Controller +-1f.0 Intel Corporation 82801HEM (ICH8M) LPC Interface Controller +-1f.1 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller +-1f.2 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller \-1f.3 Intel Corporation 82801H (ICH8 Family) SMBus Controller

--- On Thu, 7/17/08, clarkt@cnsp.com wrote:

...

From: clarkt@cnsp.com Subject: Re: [opensuse] MMC driver problems on Suse 10.3 (sd card reader) To: cts.private@yahoo.com Cc: opensuse@opensuse.org Date: Thursday, July 17, 2008, 7:14 AM

...

I'm having problems with the sd card reader on my Fujitsu Siemens Lifebook E8310 laptop.

I see on the net that there are various

From: clarkt@cnsp.com Subject: Re: [opensuse] MMC driver problems on Suse 10.3 (sd card reader) To: opensuse@opensuse.org Date: Thursday, July 17, 2008, 1:45 PM problems with

...

...

the device and

...

various groups working on them.

I'd like to get the most recent version of the same driver that Suse put into it's 10.3 release.

Can anyone point me to Suse's source?

The problems I'm having are: - after a while, and/or certain events (power saving mode?), I lose my mount - or I can't mount the card anymore. - now, I don't even get a udev event anymore (did I muck up something in the configuration?)

Please do a lspci -vt and post the output to help identify the chipset.

Clark

When it quits working, are there any messages shown in dmesg? Any messages about IRQ ?? an no one cared?

C

Ah yes: Jul 1 08:46:31 txm10 kernel: irq 16: nobody cared (try booting with the "irqpoll" optio Jul 1 08:46:31 txm10 kernel: Jul 1 08:46:31 txm10 kernel: Call Trace: Jul 1 08:46:31 txm10 kernel: <IRQ> [<ffffffff8025fde7>] __report_bad_irq+0x30/0x7d Jul 1 08:46:31 txm10 kernel: [<ffffffff80260036>] note_interrupt+0x202/0x244 Jul 1 08:46:31 txm10 kernel: [<ffffffff802608cf>] handle_fasteoi_irq+0xa9/0xd0 Jul 1 08:46:31 txm10 kernel: [<ffffffff8020c136>] do_IRQ+0x6c/0xd6 Jul 1 08:46:31 txm10 kernel: [<ffffffff8020a141>] ret_from_intr+0x0/0xa Jul 1 08:46:31 txm10 kernel: <EOI> [<ffffffff803f2f3c>] unix_poll+0x0/0x96 Jul 1 08:46:31 txm10 kernel: [<ffffffff88004012>] :processor:acpi_processor_idle+0x1df Jul 1 08:46:31 txm10 kernel: [<ffffffff88004008>] :processor:acpi_processor_idle+0x1d5 Jul 1 08:46:31 txm10 kernel: [<ffffffff803fd28a>] notifier_call_chain+0x2/0x4c Jul 1 08:46:31 txm10 kernel: [<ffffffff88003e33>] :processor:acpi_processor_idle+0x0/0 Jul 1 08:46:31 txm10 kernel: [<ffffffff80208ce4>] default_idle+0x0/0x3d Jul 1 08:46:31 txm10 kernel: [<ffffffff80208daf>] cpu_idle+0x8e/0xb1 Jul 1 08:46:31 txm10 kernel: Jul 1 08:46:31 txm10 kernel: handlers: Jul 1 08:46:31 txm10 kernel: [<ffffffff881a4975>] (sdhci_irq+0x0/0x523 [sdhci]) Jul 1 08:46:31 txm10 kernel: [<ffffffff883205d1>] (yenta_interrupt+0x0/0xb3 [yenta_sock Jul 1 08:46:31 txm10 kernel: [<ffffffff883205d1>] (yenta_interrupt+0x0/0xb3 [yenta_sock Jul 1 08:46:31 txm10 kernel: Disabling IRQ #16 Jul 1 09:00:02 txm10 su: (to beagleindex) root on none Also, I have: Jul 2 11:30:45 txm10 kernel: mmc0: Timeout waiting for hardware interrupt. Jul 2 11:30:45 txm10 kernel: sdhci: ============== REGISTER DUMP ============== Jul 2 11:30:45 txm10 kernel: sdhci: Sys addr: 0x00000000 | Version: 0x0000c002 Jul 2 11:30:45 txm10 kernel: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008 Jul 2 11:30:45 txm10 kernel: sdhci: Argument: 0x00e27200 | Trn mode: 0x00000032 Jul 2 11:30:45 txm10 kernel: sdhci: Present: 0x01ff0a06 | Host ctl: 0x00000003 Jul 2 11:30:45 txm10 kernel: sdhci: Power: 0x0000000d | Blk gap: 0x00000000 Jul 2 11:30:45 txm10 kernel: sdhci: Wake-up: 0x00000000 | Clock: 0x00000107 Jul 2 11:30:45 txm10 kernel: sdhci: Timeout: 0x00000008 | Int stat: 0x00000021 Jul 2 11:30:45 txm10 kernel: sdhci: Int enab: 0x00ff00fb | Sig enab: 0x00ff00fb Jul 2 11:30:45 txm10 kernel: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000001 Jul 2 11:30:45 txm10 kernel: sdhci: Caps: 0x038121a1 | Max curr: 0x00ffffff Jul 2 11:30:45 txm10 kernel: sdhci: =========================================== Jul 2 11:30:45 txm10 kernel: mmcblk1: error 1 sending read/write command Jul 2 11:30:45 txm10 kernel: end_request: I/O error, dev mmcblk1, sector 28985 Jul 2 11:30:45 txm10 kernel: Buffer I/O error on device mmcblk1p1, logical block 28928 Jul 2 11:30:45 txm10 kernel: end_request: I/O error, dev mmcblk1, sector 28986 Jul 2 11:30:45 txm10 kernel: Buffer I/O error on device mmcblk1p1, logical block 28929 Jul 2 11:30:45 txm10 kernel: end_request: I/O error, dev mmcblk1, sector 28987 Jul 2 11:30:45 txm10 kernel: Buffer I/O error on device mmcblk1p1, logical block 28930 Jul 2 11:30:45 txm10 kernel: end_request: I/O error, dev mmcblk1, sector 28988 Jul 2 11:30:45 txm10 kernel: Buffer I/O error on device mmcblk1p1, logical block 28931 Jul 2 11:30:45 txm10 kernel: end_request: I/O error, dev mmcblk1, sector 28989 Jul 2 11:30:45 txm10 kernel: Buffer I/O error on device mmcblk1p1, logical block 28932 ... -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

--- On Fri, 7/18/08, clarkt@cnsp.com wrote:

From: clarkt@cnsp.com Subject: Re: [opensuse] MMC driver problems on Suse 10.3 (sd card reader) To: cts.private@yahoo.com Cc: opensuse@opensuse.org, clarkt@cnsp.com Date: Friday, July 18, 2008, 6:24 AM

...

...

...

...

When it quits working, are there any messages shown in dmesg? Any messages about IRQ ?? an no one cared?

C

...

There is a hardware issue and you're chooses are to boot with irqpoll option which will make the system slugish but the slot will work. Putting the system into suspend to ram and bringing it back will also clear the problem for a time.

Okay, so the answer to the original question was, I'm at the state of the art so there's currently no benefit to updating my driver, I guess. Thank you for looking into for me. Can you give me an idea where I can keep an eye open for updates? -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org