firewall/gateway/router
Hi, I'm trying to make a linux(SuSE) firewall/router/gateway for my for my wife's WinME box and my SuSE box. I've scanned the SuSE manual, "Linux Networking: Clearly Explained" and "Linux Network Servers". After all that I'm still was what still in the dark. So I've got my firewall/gateway/router box. with External eth0 24.x.x.x(IP), 24.x.x.1(gateway), crxxxx-a.slnt1.on.wave.home.com(Domain) Internal eth1 192.x.x.1(IP), 192.168.100.7(gateway), geeko-gate.crxxxx-a.slnt1.on.wave.home.com(Domain) My Box 192.x.x.2(IP), 192.168.100.7(gateway), geeko-deville.crxxxx-a.slnt1.on.wave.home.com(Domain) My Wife's Box 192.x.x.3(IP), 192.168.100.7(gateway), geeko-babe.crxxxx-a.slnt1.on.wave.home.com(Domain) Well that is the present setup. However I seem to be missing something, because this neither geeko-deville nor geeko-babe can get to the outside work. I did an ifconfig and the two nics seem to be working fine as far as I can tell. So if you have and bright ideas as to where to go next please let me know. Thanks.
b stephen harding wrote:
Hi,
I'm trying to make a linux(SuSE) firewall/router/gateway for my for my wife's WinME box and my SuSE box. I've scanned the SuSE manual, "Linux Networking: Clearly Explained" and "Linux Network Servers". After all that I'm still was what still in the dark.
So I've got my firewall/gateway/router box.
with
External eth0 24.x.x.x(IP), 24.x.x.1(gateway), crxxxx-a.slnt1.on.wave.home.com(Domain)
Internal eth1 192.x.x.1(IP), 192.168.100.7(gateway), geeko-gate.crxxxx-a.slnt1.on.wave.home.com(Domain)
My Box 192.x.x.2(IP), 192.168.100.7(gateway), geeko-deville.crxxxx-a.slnt1.on.wave.home.com(Domain)
My Wife's Box 192.x.x.3(IP), 192.168.100.7(gateway), geeko-babe.crxxxx-a.slnt1.on.wave.home.com(Domain)
Well that is the present setup. However I seem to be missing something, because this neither geeko-deville nor geeko-babe can get to the outside work. I did an ifconfig and the two nics seem to be working fine as far as I can tell. So if you have and bright ideas as to where to go next please let me know. Thanks.
I got a box going like you want on a cable modem. Check the file /etc/rc.config.d/firewall2.rc.config This is extremely useful and pretty easy to setup. I take its 7.2? Also, check /etc/rc.config and look for the eth0 and eth1 lines. Here is my entries for /etc/rc.config # number of network cards: "_0" for one, "_0 _1 _2 _3" for four cards # NETCONFIG="_0 _1" # IP Adresses # IPADDR_0="24.9.170.162" # External address IPADDR_1="192.168.0.1" # Internal address IPADDR_2="" IPADDR_3="" # # parameteres for ifconfig, simply enter "bootp" or "dhcpclient" to use the # respective service for configuration # sample entry for ethernet: # IFCONFIG_0="192.168.81.38 broadcast 192.168.81.63 netmask 255.255.255.224" # IFCONFIG_0="24.9.170.162 broadcast 24.9.170.255 netmask 255.255.255.128 up" IFCONFIG_1="192.168.0.1 broadcast 192.168.0.255 netmask 255.255.255.0" IFCONFIG_2="" IFCONFIG_3="" Then go to yast and put in your gateway address for the external device, you can of course do that first. Or you can edit the file /etc/route.conf 24.9.170.128 0.0.0.0 255.255.255.128 eth0 default 24.9.170.129 Let me know if you need any more help. Do not forget to run run SuSEconfig either. Matt
b stephen harding wrote:
Hi,
I'm trying to make a linux(SuSE) firewall/router/gateway for my for my wife's WinME box and my SuSE box. I've scanned the SuSE manual, "Linux Networking: Clearly Explained" and "Linux Network Servers". After all that I'm still was what still in the dark.
So I've got my firewall/gateway/router box.
with
External eth0 24.x.x.x(IP), 24.x.x.1(gateway), crxxxx-a.slnt1.on.wave.home.com(Domain)
Internal eth1 192.x.x.1(IP), 192.168.100.7(gateway), geeko-gate.crxxxx-a.slnt1.on.wave.home.com(Domain)
My Box 192.x.x.2(IP), 192.168.100.7(gateway), geeko-deville.crxxxx-a.slnt1.on.wave.home.com(Domain)
My Wife's Box 192.x.x.3(IP), 192.168.100.7(gateway), geeko-babe.crxxxx-a.slnt1.on.wave.home.com(Domain)
Well that is the present setup. However I seem to be missing something, because this neither geeko-deville nor geeko-babe can get to the outside work. I did an ifconfig and the two nics seem to be working fine as far as I can tell. So if you have and bright ideas as to where to go next please let me know. Thanks.
Knew of was forgetting something...DNS! Where is your DNS? Use Yast to set that up, first use your own IP as the default and your own domain name, then add the ones @home gave you. Also, edit /etc/rc.config and make sure DNS and NSCD is set to yes for startup. To start with no reboot do: rcnamed start Matt
participants (2)
-
b stephen harding
-
StarTux