Hi. I'm running SuSE 8.0, and have had the Sylpheed installed from the DVD. I now want to get the most new sylpheed installed, and have done downloaded it by aid of CVS. When I run ./autogen.sh the following fail come up: erik@eurit:~/sylpheed-claws> ./autogen.sh aclocal: configure.in: 111: macro `AM_PATH_GDK_PIXBUF' not found in library aclocal: configure.in: 116: macro `AM_PATH_GDK_IMLIB' not found in library I have installed all the GTK from the SuSE 8.0 DVD. What can I do now ?. -- Med venlig hilsen - Best regards - Vy 73 de oz4kk Erik Jakobsen - erik@urbakken.dk SuSE Linux 8.0 Professional.
* Erik Jakobsen (erik@urbakken.dk) [020830 23:14]: :: ::When I run ./autogen.sh the following fail come up: :: ::erik@eurit:~/sylpheed-claws> ./autogen.sh ::aclocal: configure.in: 111: macro `AM_PATH_GDK_PIXBUF' not found in library ::aclocal: configure.in: 116: macro `AM_PATH_GDK_IMLIB' not found in library It's looking for a version of imlib so I would be sure you have imlib installed and also what version it is. You may need a newer version. Same goes for the first complaint which is it's looking for GDK_PIXBUF this also is a library that doesn't have much to do with GTK+ or Glib. You might check to see if it's installed as well. These are the packages for gdk-pixbuf: gdk-pixbuf-0.18.0-2 gdk-pixbuf-devel-0.18.0-2 And for imlib: imlib-1.9.10-392 imlib-devel-1.9.10-392 You would want to make sure these are installed. ::What can I do now ?. Install them. ;) Cheers! -- Ben Rosenberg ---===---===---===--- mailto:ben@whack.org Tell me what you believe.. I tell you what you should see.
On Sat, 2002-08-31 at 09:16, Ben Rosenberg wrote:
* Erik Jakobsen (erik@urbakken.dk) [020830 23:14]: :: ::When I run ./autogen.sh the following fail come up: :: ::erik@eurit:~/sylpheed-claws> ./autogen.sh ::aclocal: configure.in: 111: macro `AM_PATH_GDK_PIXBUF' not found in library ::aclocal: configure.in: 116: macro `AM_PATH_GDK_IMLIB' not found in library
It's looking for a version of imlib so I would be sure you have imlib installed and also what version it is. You may need a newer version. Same goes for the first complaint which is it's looking for GDK_PIXBUF this also is a library that doesn't have much to do with GTK+ or Glib. You might check to see if it's installed as well.
Ok Ben.
These are the packages for gdk-pixbuf:
gdk-pixbuf-0.18.0-2 gdk-pixbuf-devel-0.18.0-2
My version is: gdk-pixbuf-0.16.0-70
And for imlib:
imlib-1.9.10-392 imlib-devel-1.9.10-392
My version is: imlib-1.9.10-301 And they worked with the Sylpheed to be found on the SuSE 8.0 DVD.
You would want to make sure these are installed.
::What can I do now ?.
Install them. ;)
Cheers!
Cheers Ben, and thanks.
--
Ben Rosenberg ---===---===---===--- mailto:ben@whack.org Tell me what you believe.. I tell you what you should see.
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
Regards, Erik Jakobsen
On Saturday 31 August 2002 09:47, Erik Jakobsen wrote:
These are the packages for gdk-pixbuf:
gdk-pixbuf-0.18.0-2 gdk-pixbuf-devel-0.18.0-2
Hi Ben. I updated to the versions you mentioned, and now I'm not receiving the messages now.
And for imlib:
imlib-1.9.10-392 imlib-devel-1.9.10-392
Also that helpde :-) There is a message: configure.in:51: warning: AC_ARG_PROGRAM invoked multiple times configure.in:60: warning: AC_PROG_LEX invoked multiple times What does this mean beside "invoked several times" ?. -- Med venlig hilsen - Best regards - Vy 73 de oz4kk Erik Jakobsen - erik@urbakken.dk SuSE Linux 8.0 Professional.
* Erik Jakobsen (erik@urbakken.dk) [020831 01:10]: ::On Saturday 31 August 2002 09:47, Erik Jakobsen wrote: :: ::> > These are the packages for gdk-pixbuf: ::> > ::> > gdk-pixbuf-0.18.0-2 ::> > gdk-pixbuf-devel-0.18.0-2 :: ::Hi Ben. I updated to the versions you mentioned, and now I'm not receiving the ::messages now. :: Cool :) :: ::Also that helpde :-) :: ::There is a message: :: ::configure.in:51: warning: AC_ARG_PROGRAM invoked multiple times ::configure.in:60: warning: AC_PROG_LEX invoked multiple times :: ::What does this mean beside "invoked several times" ?. No clue. I don't recognize these requirements. I'll have to hand this off to someone else. :/ Sorry. -- Ben Rosenberg ---===---===---===--- mailto:ben@whack.org Tell me what you believe.. I tell you what you should see.
On Saturday 31 August 2002 10:20, Ben Rosenberg wrote:
::Hi Ben. I updated to the versions you mentioned, and now I'm not :: receiving the messages now.
Cool :)
Yes and again Ben thanks for the help. I found the updated files via google. Google IS nice :-)
::There is a message: :: ::configure.in:51: warning: AC_ARG_PROGRAM invoked multiple times ::configure.in:60: warning: AC_PROG_LEX invoked multiple times :: ::What does this mean beside "invoked several times" ?.
No clue. I don't recognize these requirements. I'll have to hand this off to someone else. :/
Hope someone reads this :-)
Sorry.
No reason for saying "Sorry" Ben. You know all but this :-) -- Med venlig hilsen - Best regards - Vy 73 de oz4kk Erik Jakobsen - erik@urbakken.dk SuSE Linux 8.0 Professional.
Hi, Does anyone know if it's possible to increase the number of tcp/ip buffers available from inside a program? Thanx alan -- http://www.ibgames.net/alan Registered Linux user #6822 http://counter.li.org Winding Down - Weekly Tech Newsletter - subscribe at http://www.ibgames.net/alan/winding/mailing.html
I'm trying to dialin to my office server (SuSE 8.0) to access the internet and stop paying for an ISP. I can dial in and connect to the server with no problem. I can ping the server, but not the router or any of the other boxes on the local network or the internet. My server is behind a hardware router, so I tried turning off the firewall, but that didn't help either. I assume i need to set up routing or IP masq or forwarding. After reading the howtos, I realize I know and understand nothing. It appears I need to add a few lines to my firewall scripts (SuSEfirewall2_XXX) but I don't which one or where. Can anyone help? SETUP internet router 192.168.0.1 switch server 192.168.0.10 modem home 192.168.0.5
Hi.
I'm running SuSE 8.0, and have had the Sylpheed installed from the DVD.
I now want to get the most new sylpheed installed, and have done downloaded it by aid of CVS.
When I run ./autogen.sh the following fail come up:
On Sat, 31 Aug 2002 08:15:53 +0200 Erik Jakobsen <erik@urbakken.dk> wrote: the most stable sylpheed is here http://sylpheed.good-day.net/index.cgi.en
On Saturday 31 August 2002 12:50, Landy Roman wrote: Hi Landy.
the most stable sylpheed is here
This is the version I have, and got by aid of CVS, but I have a fault running the ./autogen.sh: configure.in:51: warning: AC_ARG_PROGRAM invoked multiple times configure.in:60: warning: AC_PROG_LEX invoked multiple times The final of this is: sylpheed 0.8.2claws11 image support : yes (gdk-pixbuf) GPGME : no JPilot : no LDAP : no OpenSSL : no compface : no libjconv : no IPv6 : no GNU/aspell : no The binary will be installed in /usr/local/bin Configure finished, type 'make' to build. How do I get rid of that warning ?. -- Med venlig hilsen - Best regards - Vy 73 de oz4kk Erik Jakobsen - erik@urbakken.dk SuSE Linux 8.0 Professional.
On Sat, 31 Aug 2002 13:02:29 +0200 Erik Jakobsen <erik@urbakken.dk> wrote:
On Saturday 31 August 2002 12:50, Landy Roman wrote:
Hi Landy.
the most stable sylpheed is here
This is the version I have, and got by aid of CVS, but I have a fault running the ./autogen.sh:
configure.in:51: warning: AC_ARG_PROGRAM invoked multiple times configure.in:60: warning: AC_PROG_LEX invoked multiple times
The final of this is:
sylpheed 0.8.2claws11
image support : yes (gdk-pixbuf) GPGME : no JPilot : no LDAP : no OpenSSL : no compface : no libjconv : no IPv6 : no GNU/aspell : no
The binary will be installed in /usr/local/bin
Configure finished, type 'make' to build.
How do I get rid of that warning ?.
-- Med venlig hilsen - Best regards - Vy 73 de oz4kk Erik Jakobsen - erik@urbakken.dk SuSE Linux 8.0 Professional.
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
the warning is related to autoconf why don't you download the full tree and run ./configure
On Saturday 31 August 2002 13:21, Landy Roman wrote:
the warning is related to autoconf
why don't you download the full tree and run ./configure
That is also what I could do, but was a bit impressed of the CVS. How do I download then when a new version is available, and I want to save the setup ??. -- Med venlig hilsen - Best regards - Vy 73 de oz4kk Erik Jakobsen - erik@urbakken.dk SuSE Linux 8.0 Professional.
participants (5)
-
alan＠ibgames.com -
Ben Rosenberg -
Erik Jakobsen -
Landy Roman -
Rob Bourne