Need Help with my Hauppauge Wintv Card. I am running Suse 64. Matrox Millenium G400 32M Ram, 256M Ram, MetroX, and Video mode is 1280x1024 on 21" Display. The Hauppauge supports from 640x480 to 1280x1024 16m Colors. I know this be cause I run it on the other OS I run the least amount of time (NT4.0). It is the Hauppauge Model 400 WinTV-radio with dbx-TV stereo, FM Radio & Remote PCI. Neither the Radio or TV will work under linux. Although with xawtv I have been able to see the sync channel/. (top of picture). Any Ideas. Oh I am running either WindowMaker or KDE.. Thanks Patrick -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Patrick Wilke wrote:
Need Help with my Hauppauge Wintv Card.
I am running Suse 64. Matrox Millenium G400 32M Ram, 256M Ram, MetroX, and Video mode is 1280x1024 on 21" Display. The Hauppauge supports from 640x480 to 1280x1024 16m Colors. I know this be cause I run it on the other OS I run the least amount of time (NT4.0). It is the Hauppauge Model 400 WinTV-radio with dbx-TV stereo, FM Radio & Remote PCI. Neither the Radio or TV will work under linux. Although with xawtv I have been able to see the sync channel/. (top of picture). Any Ideas. Oh I am running either WindowMaker or KDE..
I am using the Win TV radio PCI 647 model which is equivalent to model 401 everything except the remote control is functioning (since I did not bother with it) under KDE using kwintv and nothing special is done it works out of box under Suse. Here is what I have in the /etc/modules.conf file alias char-major-81 bttv options bttv card=10 pll=1 vidmem=0xde0 radio=1 options tuner type=5 pre-install bttv modprobe "-k" "tuner"; modprobe "-k" "msp3400" post-remove bttv modprobe "-r" "tuner" post-remove bttv modprobe "-r" "msp3400" make sure you use the vidmem parameter based on your configuration. Hope this helps -- Togan Muftuoglu toganm@turk.net -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Didn't work but I am getting closer. As soon as I get the latest Driver updates from Xi, I am going to remove MetroX and replace the Xserver with Accelerated-X, and since I can't go Diving this weekend I'll spend sometime on the Wintv card....... Thank You Patrick On Mon, 22 May 2000, Togan Muftuoglu wrote:
Patrick Wilke wrote:
Need Help with my Hauppauge Wintv Card.
I am running Suse 64. Matrox Millenium G400 32M Ram, 256M Ram, MetroX, and Video mode is 1280x1024 on 21" Display. The Hauppauge supports from 640x480 to 1280x1024 16m Colors. I know this be cause I run it on the other OS I run the least amount of time (NT4.0). It is the Hauppauge Model 400 WinTV-radio with dbx-TV stereo, FM Radio & Remote PCI. Neither the Radio or TV will work under linux. Although with xawtv I have been able to see the sync channel/. (top of picture). Any Ideas. Oh I am running either WindowMaker or KDE..
I am using the Win TV radio PCI 647 model which is equivalent to model 401 everything except the remote control is functioning (since I did not bother with it) under KDE using kwintv and nothing special is done it works out of box under Suse. Here is what I have in the /etc/modules.conf file
alias char-major-81 bttv
options bttv card=10 pll=1 vidmem=0xde0 radio=1 options tuner type=5 pre-install bttv modprobe "-k" "tuner"; modprobe "-k" "msp3400" post-remove bttv modprobe "-r" "tuner" post-remove bttv modprobe "-r" "msp3400"
make sure you use the vidmem parameter based on your configuration.
Hope this helps
-- Togan Muftuoglu toganm@turk.net
-- Nothing as yet -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
On Mon, May 22, 2000 at 08:56:46PM -0800, Patrick Wilke wrote:
I am running Suse 64. Matrox Millenium G400 32M Ram, 256M Ram, MetroX, and Video mode is 1280x1024 on 21" Display. The Hauppauge supports from 640x480 to 1280x1024 16m Colors. I know this be cause I run it on the other OS I run the least amount of time (NT4.0). It is the Hauppauge Model 400 WinTV-radio with dbx-TV stereo, FM Radio & Remote PCI. Neither the Radio or TV will work under linux. Although with xawtv I have been able to see the sync channel/. (top of picture). Any Ideas. Oh I am running either WindowMaker or KDE..
I'm running the WinTV Go!, with the Bt848 chip and a Miro 3400 tuner. All I had to do to make it work was modprobe bttv && modprobe tuner You *must* load the tuner module on Huappauge cards, or you'll get no output. At worst, you may have to slightly edit /etc/conf.modules. As far as display resolution, in order to get displays that large, you'd have to interlace the video signal from the card. -- -=|JP|=- "Why, oh, why didn't I take the blue pill?" Jon Pennington | Atipa Linux Solutions -o) jpennington@atipa.com | http://www.atipa.com /\\ Kansas City, MO, USA | 816-241-2641 x121 _\_V 6D04 39E0 CAE9 9ADA 2CA3 2EBE 898A 6C37 CA1E A29C -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Hmmm, ok weill give it a try this weekend.... Thank You Sir Patrick On Tue, 23 May 2000, Jon Pennington wrote:
On Mon, May 22, 2000 at 08:56:46PM -0800, Patrick Wilke wrote:
I am running Suse 64. Matrox Millenium G400 32M Ram, 256M Ram, MetroX, and Video mode is 1280x1024 on 21" Display. The Hauppauge supports from 640x480 to 1280x1024 16m Colors. I know this be cause I run it on the other OS I run the least amount of time (NT4.0). It is the Hauppauge Model 400 WinTV-radio with dbx-TV stereo, FM Radio & Remote PCI. Neither the Radio or TV will work under linux. Although with xawtv I have been able to see the sync channel/. (top of picture). Any Ideas. Oh I am running either WindowMaker or KDE..
I'm running the WinTV Go!, with the Bt848 chip and a Miro 3400 tuner. All I had to do to make it work was
modprobe bttv && modprobe tuner
You *must* load the tuner module on Huappauge cards, or you'll get no output. At worst, you may have to slightly edit /etc/conf.modules.
As far as display resolution, in order to get displays that large, you'd have to interlace the video signal from the card.
-- -=|JP|=- "Why, oh, why didn't I take the blue pill?" Jon Pennington | Atipa Linux Solutions -o) jpennington@atipa.com | http://www.atipa.com /\\ Kansas City, MO, USA | 816-241-2641 x121 _\_V
6D04 39E0 CAE9 9ADA 2CA3 2EBE 898A 6C37 CA1E A29C
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
-- Nothing as yet -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
participants (3)
-
jpennington＠atipa.com -
pwilke＠alaska.net -
toganm＠turk.net