Leap 15.4 installation help
Hello everybody I have a 6 years old still powerful enough pc. I tried many times to install open suse leap 15.3 but failed. What happened is that the installation media send me to something like yast on terminal to choose media, an action always failing whatever i choose. I send you my hardware list. I am looking for someone facing similar problems and how can be fixed. And i am asking if someone installed leap 15.4 into similar hardware. This pc is running now ubuntu 22.04 Best regards George hwinfo --short cpu: AMD FX(tm)-6300 Six-Core Processor, 3500 MHz AMD FX(tm)-6300 Six-Core Processor, 2500 MHz AMD FX(tm)-6300 Six-Core Processor, 1400 MHz AMD FX(tm)-6300 Six-Core Processor, 3500 MHz AMD FX(tm)-6300 Six-Core Processor, 1400 MHz AMD FX(tm)-6300 Six-Core Processor, 3072 MHz keyboard: /dev/input/event5 Dell Universal Receiver /dev/input/event2 China Resource Semico USB Keyboard mouse: /dev/input/mice Dell Universal Receiver scanner: Epson GT-9300UF [Perfection 2400 PHOTO] monitor: LG ELECTRONICS LG FULL HD graphics card: nVidia GK107 [GeForce GT 640] sound: Creative CA0106/CA0111 [SB Live!/Audigy/X-Fi Series] nVidia GK107 HDMI Audio Controller ATI SBx00 Azalia (Intel HDA) storage: Gigabyte GA-880GMA-USB3 network: enp3s0 Gigabyte Onboard Ethernet network interface: lo Loopback network interface virbr0 Ethernet network interface enp3s0 Ethernet network interface disk: /dev/sdd TOSHIBA DT01ACA1 /dev/sdb SanDisk SDSSDP12 /dev/sdc WDC WD5000LPVX-7 /dev/sda A SP550 partition: /dev/sdd1 Partition /dev/sdb1 Partition /dev/sdc1 Partition /dev/sdc2 Partition /dev/sda1 Partition /dev/sda2 Partition /dev/sda3 Partition cdrom: /dev/sr0 TSSTcorp CDDVDW SH-224GB usb controller: Gigabyte GA-880GMA-USB3 VIA VL805 USB 3.0 Host Controller Gigabyte GA-880GMA-USB3 Gigabyte GA-880GMA-USB3 Gigabyte GA-880GMA-USB3 Gigabyte GA-880GMA-USB3 Gigabyte GA-880GMA-USB3 Gigabyte GA-880GMA-USB3 bios: BIOS bridge: AMD Family 15h Processor Function 3 AMD Family 15h Processor Function 1 ATI RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0) ATI SB7x0/SB8x0/SB9x0 LPC host controller ATI RD9x0/RX980 Host Bridge AMD Family 15h Processor Function 4 AMD Family 15h Processor Function 2 AMD Family 15h Processor Function 0 ATI SBx00 PCI to PCI Bridge ATI RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 4) ATI RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0) AMD Family 15h Processor Function 5 hub: Linux Foundation 1.1 root hub NEC HighSpeed Hub Linux Foundation 2.0 root hub NEC HighSpeed Hub Linux Foundation 1.1 root hub Linux Foundation 1.1 root hub Linux Foundation 2.0 root hub Linux Foundation 1.1 root hub Linux Foundation 2.0 root hub memory: Main Memory unknown: FPU DMA controller PIC Keyboard controller ATI RD890S/RD990 I/O Memory Management Unit (IOMMU) ATI SBx00 SMBus Controller Serial controller Dell Universal Receiver Logitech Webcam C270 /dev/input/event3 China Resource Semico USB Keyboard
George Pappap wrote:
Hello everybody
I have a 6 years old still powerful enough pc. I tried many times to install open suse leap 15.3 but failed. What happened is that the installation media send me to something like yast on terminal to choose media, an action always failing whatever i choose.
Hello George, how are you installing? from USB, from DVD, over the network? Maybe you could post a screenshot of the above, I can't quite figure out what you mean. I don't think it is a hardware issue. -- Per Jessen, Zürich (23.7°C)
participants (2)
-
George Pappap -
Per Jessen