What type of RAID controller or driver are you using? I run HP/Compaq servers and found that after the initial install completed, adding apm=off and acpi=off was necessary to make the system boot. Khanh Tran Network Operations Sarah Lawrence College -----Original Message----- From: Listeny [mailto:listen@system-canvas.com] Sent: Friday, November 12, 2004 2:42 AM To: suse-linux-e@suse.com Subject: [SLE] SMP kernel Hi, Some months ago, I tried to update SMP kernel modules from initial packages(SL9.1). After updating, my Suse box could not boot... My box is DELL PowerEdge 1400SC (Xeon x 2,1GB RAM, RAID5 array). Boot panic looks like raid driver missing. I afraid of SMP kernel correspondings. Does some one mentioned same situations ? And also latest SMP kernel module can run on PowerEdge1400SC/RAID ? Sorry, I joined this list today. If this topic was already discussed, please let me know timestamps of old articles. Thanks. -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
Thanks for your resnponse.
dmesg shows as follows
scsi0 : LSI Logic MegaRAID 6.62 254 commands 16 targs 7 chans 7 luns
scsi0: scanning scsi channel 0 for logical drives.
Vendor: MegaRAID Model: LD 0 RAID5 152G Rev: 6.62
Type: Direct-Access ANSI SCSI revision: 02
On Fri, 12 Nov 2004 09:02:38 -0500
"Khanh Tran"
What type of RAID controller or driver are you using? I run HP/Compaq servers and found that after the initial install completed, adding apm=off and acpi=off was necessary to make the system boot.
Khanh Tran Network Operations Sarah Lawrence College
-----Original Message----- From: Listeny [mailto:listen@system-canvas.com] Sent: Friday, November 12, 2004 2:42 AM To: suse-linux-e@suse.com Subject: [SLE] SMP kernel
Hi,
Some months ago, I tried to update SMP kernel modules from initial packages(SL9.1). After updating, my Suse box could not boot...
My box is DELL PowerEdge 1400SC (Xeon x 2,1GB RAM, RAID5 array). Boot panic looks like raid driver missing.
I afraid of SMP kernel correspondings.
Does some one mentioned same situations ? And also latest SMP kernel module can run on PowerEdge1400SC/RAID ?
Sorry, I joined this list today. If this topic was already discussed, please let me know timestamps of old articles.
Thanks.
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
participants (2)
-
Khanh Tran
-
Listeny