[opensuse] Help needed with acpupsd and a ACP 550 backups pro, config error?
With 13.2 the acpupsd worked flawlessly. With 42.2 it segfaulted but to my delight having updated the machine to 42.3 now it starts, all seems O.K. BUT(!): I have no communication. A fast check shows that: sudo systemctl status acpid.service [sudo] password di root: ● apcupsd.service - APC UPS Power Control Daemon for Linux Loaded: loaded (/usr/lib/systemd/system/apcupsd.service; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since mer 2017-11-15 08:57:44 CET; 55min ago Process: 12179 ExecStart=/usr/sbin/apcupsd -b -f /etc/apcupsd/apcupsd.conf (code=exited, status=1/FAILURE) Process: 12175 ExecStartPre=/bin/rm -f /etc/apcupsd/powerfail (code=exited, status=0/SUCCESS) Main PID: 12179 (code=exited, status=1/FAILURE) nov 15 08:57:44 azzurro.fritz.box systemd[1]: Starting APC UPS Power Control Daemon for Linux... nov 15 08:57:44 azzurro.fritz.box systemd[1]: Started APC UPS Power Control Daemon for Linux. nov 15 08:57:44 azzurro.fritz.box apcupsd[12179]: apcupsd FATAL ERROR in apcconfig.c at line 671 nov 15 08:57:44 azzurro.fritz.box apcupsd[12179]: Terminating due to configuration file errors. nov 15 08:57:44 azzurro.fritz.box systemd[1]: apcupsd.service: Main process exited, code=exited, status=1/FAILURE nov 15 08:57:44 azzurro.fritz.box systemd[1]: apcupsd.service: Unit entered failed state. nov 15 08:57:44 azzurro.fritz.box systemd[1]: apcupsd.service: Failed with result 'exit-code'. Now the thing is, I did not really change something of the configfile and I do not see any difference to the default file when it comes to settings or syntax. If somebody sees or knows what is happening, I would be very grateful to point me to a solution. I get in the apc mon "unknown@localhost" is NISERR NIS network error. But since I run it with locally attached usb cable.... ? I controlled all cable settings and all cable plugs on the UPS and the machine. I join the config file here: http://paste.opensuse.org/75785249 Thanks in advance. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
stakanov wrote:
I controlled all cable settings and all cable plugs on the UPS and the machine. I join the config file here:
Hi Stakanov I think you need to use "UPSNAME apc550" instead of of only "apc550". -- Per Jessen, Zürich (2.3°C) http://www.hostsuisse.com/ - dedicated server rental in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Per Jessen wrote:
stakanov wrote:
I controlled all cable settings and all cable plugs on the UPS and the machine. I join the config file here:
Hi Stakanov
I think you need to use "UPSNAME apc550" instead of of only "apc550".
Your UPSTYPE is empty - maybe that ought to be "UPSTYPE usb" ? -- Per Jessen, Zürich (2.4°C) http://www.dns24.ch/ - your free DNS host, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
In data venerdì 17 novembre 2017 09:53:56 CET, Per Jessen ha scritto:
Per Jessen wrote:
stakanov wrote:
I controlled all cable settings and all cable plugs on the UPS and the machine. I join the config file here:
Hi Stakanov
I think you need to use "UPSNAME apc550" instead of of only "apc550".
Your UPSTYPE is empty - maybe that ought to be "UPSTYPE usb" ? I tried to put UPSTYPE usb and UPSNAME apc550
It takes now longer to have the program running, the network error is "network busy". But in systemd I get the same config file error line 671 That looks like a bug? -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
stakanov wrote:
In data venerdì 17 novembre 2017 09:53:56 CET, Per Jessen ha scritto:
Per Jessen wrote:
stakanov wrote:
I controlled all cable settings and all cable plugs on the UPS and the machine. I join the config file here:
Hi Stakanov
I think you need to use "UPSNAME apc550" instead of of only "apc550".
Your UPSTYPE is empty - maybe that ought to be "UPSTYPE usb" ? I tried to put UPSTYPE usb and UPSNAME apc550
It takes now longer to have the program running, the network error is "network busy". But in systemd I get the same config file error line 671 That looks like a bug?
The error in 671 is just a common exit when errors were found the config. I guess you have no problem seeing your UPS: lsusb -- Per Jessen, Zürich (3.0°C) http://www.hostsuisse.com/ - virtual servers, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Per Jessen wrote:
stakanov wrote:
In data venerdì 17 novembre 2017 09:53:56 CET, Per Jessen ha scritto:
Per Jessen wrote:
stakanov wrote:
I controlled all cable settings and all cable plugs on the UPS and the machine. I join the config file here:
Hi Stakanov
I think you need to use "UPSNAME apc550" instead of of only "apc550".
Your UPSTYPE is empty - maybe that ought to be "UPSTYPE usb" ? I tried to put UPSTYPE usb and UPSNAME apc550
It takes now longer to have the program running, the network error is "network busy". But in systemd I get the same config file error line 671 That looks like a bug?
The error in 671 is just a common exit when errors were found the config. I guess you have no problem seeing your UPS:
lsusb
FWIW, I ran your config with apcupsd 3.14.13-8.45 from leap422, it worked just fine, no complaints. Then I upgraded to apcupsd 3.14.13-10.11 from leap423, also no problems starting it. This is config I used: UPSNAME apc550 UPSCABLE usb UPSTYPE usb LOCKFILE /etc/apcupsd SCRIPTDIR /etc/apcupsd PWRFAILDIR /etc/apcupsd NOLOGINDIR /etc ONBATTERYDELAY 6 BATTERYLEVEL 5 MINUTES 3 TIMEOUT 0 ANNOY 300 ANNOYDELAY 60 NOLOGON disable KILLDELAY 0 NETSERVER on NISIP 127.0.0.1 NISPORT 3551 EVENTSFILE /var/log/apcupsd.events EVENTSFILEMAX 10 UPSCLASS standalone UPSMODE disable STATTIME 0 STATFILE /var/log/apcupsd.status LOGSTATS off DATATIME 0 I don't have your UPS, but a config error should have made it fall over the same way yours did. -- Per Jessen, Zürich (3.0°C) http://www.cloudsuisse.com/ - your owncloud, hosted in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
In data venerdì 17 novembre 2017 10:58:14 CET, Per Jessen ha scritto:
stakanov wrote:
In data venerdì 17 novembre 2017 09:53:56 CET, Per Jessen ha scritto:
Per Jessen wrote:
stakanov wrote:
I controlled all cable settings and all cable plugs on the UPS and the machine. I join the config file here:
Hi Stakanov
I think you need to use "UPSNAME apc550" instead of of only "apc550".
Your UPSTYPE is empty - maybe that ought to be "UPSTYPE usb" ?
I tried to put UPSTYPE usb and UPSNAME apc550
It takes now longer to have the program running, the network error is "network busy". But in systemd I get the same config file error line 671 That looks like a bug?
The error in 671 is just a common exit when errors were found the config. I guess you have no problem seeing your UPS:
lsusb Device is listed correctly with even the APC type and producer. So it does communicate correctly. Can it be a conflict with KDE plasma5 powermanagement?
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
* stakanov <stakanov@eclipso.eu> [11-17-17 06:12]:
In data venerdì 17 novembre 2017 10:58:14 CET, Per Jessen ha scritto:
stakanov wrote:
In data venerdì 17 novembre 2017 09:53:56 CET, Per Jessen ha scritto:
Per Jessen wrote:
stakanov wrote:
I controlled all cable settings and all cable plugs on the UPS and the machine. I join the config file here:
Hi Stakanov
I think you need to use "UPSNAME apc550" instead of of only "apc550".
Your UPSTYPE is empty - maybe that ought to be "UPSTYPE usb" ?
I tried to put UPSTYPE usb and UPSNAME apc550
It takes now longer to have the program running, the network error is "network busy". But in systemd I get the same config file error line 671 That looks like a bug?
The error in 671 is just a common exit when errors were found the config. I guess you have no problem seeing your UPS:
lsusb Device is listed correctly with even the APC type and producer. So it does communicate correctly. Can it be a conflict with KDE plasma5 powermanagement?
here is mine which works server: UPSNAME paka-server UPSCABLE usb UPSTYPE usb DEVICE LOCKFILE /var/lock SCRIPTDIR /etc/apcupsd PWRFAILDIR /etc/apcupsd NOLOGINDIR /etc ONBATTERYDELAY 6 BATTERYLEVEL 5 MINUTES 3 TIMEOUT 0 ANNOY 300 ANNOYDELAY 60 NOLOGON disable KILLDELAY 0 NETSERVER on NISIP 0.0.0.0 NISPORT 3551 EVENTSFILE /var/log/apcupsd.events EVENTSFILEMAX 10 UPSCLASS standalone UPSMODE disable STATTIME 0 STATFILE /var/log/apcupsd.status LOGSTATS off DATATIME 0 UPSNAME paka-server BATTDATE 05/09/13 desktop: UPSNAME paka-ups UPSCABLE usb UPSTYPE usb DEVICE LOCKFILE /var/lock SCRIPTDIR /etc/apcupsd PWRFAILDIR /etc/apcupsd NOLOGINDIR /etc ONBATTERYDELAY 6 BATTERYLEVEL 5 MINUTES 3 TIMEOUT 0 ANNOY 300 ANNOYDELAY 60 NOLOGON disable KILLDELAY 0 NETSERVER on NISIP 0.0.0.0 NISPORT 3551 EVENTSFILE /var/log/apcupsd.events EVENTSFILEMAX 10 UPSCLASS standalone UPSMODE disable STATTIME 0 STATFILE /var/log/apcupsd.status LOGSTATS off DATATIME 0 UPSNAME paka-ups BATTDATE 08/08/10 both work fine. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Registered Linux User #207535 @ http://linuxcounter.net Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
* Patrick Shanahan <paka@opensuse.org> [11-17-17 08:07]:
* stakanov <stakanov@eclipso.eu> [11-17-17 06:12]:
In data venerdì 17 novembre 2017 10:58:14 CET, Per Jessen ha scritto:
stakanov wrote:
In data venerdì 17 novembre 2017 09:53:56 CET, Per Jessen ha scritto:
Per Jessen wrote:
stakanov wrote: > I controlled all cable settings and all cable plugs on the UPS and > the machine. > I join the config file here: > > http://paste.opensuse.org/75785249
Hi Stakanov
I think you need to use "UPSNAME apc550" instead of of only "apc550".
Your UPSTYPE is empty - maybe that ought to be "UPSTYPE usb" ?
I tried to put UPSTYPE usb and UPSNAME apc550
It takes now longer to have the program running, the network error is "network busy". But in systemd I get the same config file error line 671 That looks like a bug?
The error in 671 is just a common exit when errors were found the config. I guess you have no problem seeing your UPS:
lsusb Device is listed correctly with even the APC type and producer. So it does communicate correctly. Can it be a conflict with KDE plasma5 powermanagement?
here is mine which works
server: UPSNAME paka-server UPSCABLE usb UPSTYPE usb DEVICE LOCKFILE /var/lock SCRIPTDIR /etc/apcupsd PWRFAILDIR /etc/apcupsd NOLOGINDIR /etc ONBATTERYDELAY 6 BATTERYLEVEL 5 MINUTES 3 TIMEOUT 0 ANNOY 300 ANNOYDELAY 60 NOLOGON disable KILLDELAY 0 NETSERVER on NISIP 0.0.0.0 NISPORT 3551 EVENTSFILE /var/log/apcupsd.events EVENTSFILEMAX 10 UPSCLASS standalone UPSMODE disable STATTIME 0 STATFILE /var/log/apcupsd.status LOGSTATS off DATATIME 0 UPSNAME paka-server BATTDATE 05/09/13
desktop: UPSNAME paka-ups UPSCABLE usb UPSTYPE usb DEVICE LOCKFILE /var/lock SCRIPTDIR /etc/apcupsd PWRFAILDIR /etc/apcupsd NOLOGINDIR /etc ONBATTERYDELAY 6 BATTERYLEVEL 5 MINUTES 3 TIMEOUT 0 ANNOY 300 ANNOYDELAY 60 NOLOGON disable KILLDELAY 0 NETSERVER on NISIP 0.0.0.0 NISPORT 3551 EVENTSFILE /var/log/apcupsd.events EVENTSFILEMAX 10 UPSCLASS standalone UPSMODE disable STATTIME 0 STATFILE /var/log/apcupsd.status LOGSTATS off DATATIME 0 UPSNAME paka-ups BATTDATE 08/08/10
both work fine.
line with apc550 needs prefixed with "UPSNAME" you have empty UPSTYPE I believe NISIP should be "0.0.0.0" you are connected by USB, not NETWORK -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Registered Linux User #207535 @ http://linuxcounter.net Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
In data venerdì 17 novembre 2017 14:18:35 CET, Patrick Shanahan ha scritto:
* Patrick Shanahan <paka@opensuse.org> [11-17-17 08:07]:
* stakanov <stakanov@eclipso.eu> [11-17-17 06:12]:
In data venerdì 17 novembre 2017 10:58:14 CET, Per Jessen ha scritto:
stakanov wrote:
In data venerdì 17 novembre 2017 09:53:56 CET, Per Jessen ha scritto:
Per Jessen wrote: > stakanov wrote: >> I controlled all cable settings and all cable plugs on the UPS >> and >> the machine. >> I join the config file here: >> >> http://paste.opensuse.org/75785249 > > Hi Stakanov > > I think you need to use "UPSNAME apc550" instead of of only > "apc550".
snip-snap shortened here
I believe NISIP should be "0.0.0.0" you are connected by USB, not NETWORK
I actually did solve this by erasing the original monitor and setting up a new doing the changes you and Per noted to the config file, setting to 0.0.0.0 and changing anyway the configfile of the new rpm to be the main one and finally I did stop and restart the group APC backups. Now it works. Why I do not know but one of the things did work. Maybe the internal software of the group needed a reset? -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
participants (3)
-
Patrick Shanahan -
Per Jessen -
stakanov