[SuSE Linux] Routing tables
It looks like my "traceroute" problem is related to routing issues. I am using the 10.0.0.x/255.255.255.0 scheme. Here are the static routes defined in my /etc/route.conf. I can ping the hosts on the Internet but cannot traceroute to them. ICMP packets are getting hosed somewhere. Any help or info is appreciated. Thank you in advance. Subba Rao _____________________________________________________________________________ /etc/route.conf =============== # 193.141.17.0 0.0.0.0 255.255.255.0 isdn0 # default 193.141.17.193 127.0.0.0 0.0.0.0 255.255.255.0 lo 10.0.0.0 0.0.0.0 255.255.255.0 eth0 OUTPUT of ifconfig ================== lo Link encap:Local Loopback inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0 UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1 RX packets:207 errors:0 dropped:0 overruns:0 TX packets:207 errors:0 dropped:0 overruns:0 eth0 Link encap:10Mbps Ethernet HWaddr 00:10:4B:D1:30:8C inet addr:10.0.0.4 Bcast:10.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:886 errors:0 dropped:0 overruns:0 TX packets:562 errors:0 dropped:0 overruns:0 Interrupt:10 Base address:0xfc40 ppp0 Link encap:Point-Point Protocol inet addr:32.226.6.85 P-t-P:32.96.114.98 Mask:255.0.0.0 UP POINTOPOINT RUNNING MTU:1500 Metric:1 RX packets:1305 errors:0 dropped:0 overruns:0 TX packets:1425 errors:0 dropped:0 overruns:0 OUTPUT of route -n ================== Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 32.96.114.98 0.0.0.0 255.255.255.255 UH 0 0 1 ppp0 127.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 lo 10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 5 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 2 lo 0.0.0.0 32.96.114.98 0.0.0.0 UG 0 0 35 ppp0 _____________________________________________________________________________ - To get out of this list, please send email to majordomo@suse.com with this text in its body: unsubscribe suse-linux-e
participants (1)
-
subb3@turi.com