I managed to update from 10.2 to 10.3 over the break (with the usual confusions) on my laptop (IntelPentium M) and so far most seems to be working, except that the mounting of memory sticks no longer works. I used to use ivman as a user (non-root) but not when I run it it does not mount. I took a look at the configuration files but they are beyond my understanding. I suspect this is a hdX->sdX effect but what do I need to fix? ==John ffitch "This research is of insufficient standard" -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Friday 04 January 2008 06:04, jpff wrote:
most seems to be working, except that the mounting of memory sticks no longer works. I used to use ivman as a user (non-root) but not when I run it it does not mount. What errors do you see in the syslog, or on screen? What messages do you get when you attempt a manual mount?
Do you see your usb controller(s) in an lspci -v printout? -- Kind regards, M Harris <>< -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
"M" == M Harris <harrismh777@earthlink.net> writes:
M> On Friday 04 January 2008 06:04, jpff wrote:
most seems to be working, except that the mounting of memory sticks no longer works. I used to use ivman as a user (non-root) but not when I run it it does not mount. M> What errors do you see in the syslog, or on screen?
None; no error messages at all usb 4-3: new high speed USB device using ehci_hcd and address 2 usb 4-3: new device found, idVendor=1976, idProduct=6025 usb 4-3: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 4-3: Product: Flash Disk usb 4-3: Manufacturer: USB2.0 usb 4-3: SerialNumber: 1321430060FC9D02 usb 4-3: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning scsi 2:0:0:0: Direct-Access USB2.0 Flash Disk 5.00 PQ: 0 ANSI: 2 sd 2:0:0:0: [sdb] 249856 512-byte hardware sectors (128 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08 sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] 249856 512-byte hardware sectors (128 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08 sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI removable disk sd 2:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete M> What messages do you get when you attempt a manual mount? It mounts as expected, but I have to be root M> Do you see your usb controller(s) in an lspci -v printout? Sure I have just noticed the processes 4936 ? Ss 0:00 ivman 4938 ? S< 0:00 [scsi_eh_2] 4939 ? S< 0:00 [usb-storage] 4964 ? S 0:00 hald-addon-storage: polling /dev/sdb (every 16 sec) which is odd as it should be mounting /dev/sdb1 which works my hand So it still looks like the change to sdX ==John ffitch "This research is of insufficient standard" -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (2)
-
jpff -
M Harris