Hi, On my Leap 42.2 laptop I can't print PDF's in their original size. When I print then they come out scaled to an A5 when the original is an A4. That's with Okular. Is there some configuration I miss ? I searched for some scale-effect but I seem not to find it. TIA. Koenraad -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 2018-01-25 13:21, Koenraad Lelong wrote:
Hi,
On my Leap 42.2 laptop I can't print PDF's in their original size. When I print then they come out scaled to an A5 when the original is an A4. That's with Okular.
Can't reproduce. I just printed a random pdf in okular and it printed correctly.
Is there some configuration I miss ? I searched for some scale-effect but I seem not to find it.
I searched around in the print dialog but I did not find any scaling option. Strange. But I'm not familiar with okular, I typically print from Acrobat or Evince. The only scaling option I found is the option to print several pages per sheet. -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar)
Carlos E. R. wrote:
On 2018-01-25 13:21, Koenraad Lelong wrote:
Hi,
On my Leap 42.2 laptop I can't print PDF's in their original size. When I print then they come out scaled to an A5 when the original is an A4. That's with Okular.
Can't reproduce. I just printed a random pdf in okular and it printed correctly.
Is there some configuration I miss ? I searched for some scale-effect but I seem not to find it.
I searched around in the print dialog but I did not find any scaling option. Strange. But I'm not familiar with okular, I typically print from Acrobat or Evince.
The only scaling option I found is the option to print several pages per sheet.
Did you check the 'Properties' button next to the selected printer? There the stuff like default paper size is defined - probably that one is set wrong (either in okular, or rather in the cups printer config?) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Koenraad Lelong wrote:
Hi,
On my Leap 42.2 laptop I can't print PDF's in their original size. When I print then they come out scaled to an A5 when the original is an A4. That's with Okular.
Yep, I've been having that very same problem for more than a year, it's a bit of a show-stopper for upgrading office machines. Sofar we're printing from acroread instead. https://bugzilla.opensuse.org/show_bug.cgi?id=1015478 -- Per Jessen, Zürich (8.2°C) http://www.dns24.ch/ - your free DNS host, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Per Jessen wrote:
Koenraad Lelong wrote:
Hi,
On my Leap 42.2 laptop I can't print PDF's in their original size. When I print then they come out scaled to an A5 when the original is an A4. That's with Okular.
Yep, I've been having that very same problem for more than a year, it's a bit of a show-stopper for upgrading office machines. Sofar we're printing from acroread instead.
Uh-oh. :( And still no change there? I've used okular a lot to print from a 42.2 (now 42.3) system, but that was/is a local printer. I do print permanently to remote printers from TW machines, and have never seen such a problem. Likely printer specific then? Have you tried the okular5 package for 42.2? Your last entry in the bugreport still showed 16.08.2, where Johannes mentioned it's probably fixed in 17.08 (the okular5 from wolfi323 is at 17.12.1, like TW) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Peter Suetterlin wrote:
Per Jessen wrote:
Koenraad Lelong wrote:
Hi,
On my Leap 42.2 laptop I can't print PDF's in their original size. When I print then they come out scaled to an A5 when the original is an A4. That's with Okular.
Yep, I've been having that very same problem for more than a year, it's a bit of a show-stopper for upgrading office machines. Sofar we're printing from acroread instead.
Uh-oh. :( And still no change there?
I don't think so, I think I remember myself swearing loudly a couple of weeks ago when I tried printing out some address labels.
I've used okular a lot to print from a 42.2 (now 42.3) system, but that was/is a local printer. I do print permanently to remote printers from TW machines, and have never seen such a problem. Likely printer specific then?
It's possible, but it works fine from older desktops with opensuse 13.1. Also works fine from acroread.
Have you tried the okular5 package for 42.2? Your last entry in the bugreport still showed 16.08.2, where Johannes mentioned it's probably fixed in 17.08 (the okular5 from wolfi323 is at 17.12.1, like TW)
No, I tried 16.08.2 that Wolfgang Bauer prepared with the same fix. Well, with Leap422 going EOL tomorrow I guess I might as well move up to Leap42.3 and see if it works there. -- Per Jessen, Zürich (8.9°C) http://www.hostsuisse.com/ - virtual servers, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Per Jessen wrote:
Peter Suetterlin wrote:
Per Jessen wrote:
Koenraad Lelong wrote:
Hi,
On my Leap 42.2 laptop I can't print PDF's in their original size. When I print then they come out scaled to an A5 when the original is an A4. That's with Okular.
Yep, I've been having that very same problem for more than a year, it's a bit of a show-stopper for upgrading office machines. Sofar we're printing from acroread instead.
Uh-oh. :( And still no change there?
I don't think so, I think I remember myself swearing loudly a couple of weeks ago when I tried printing out some address labels.
No change confirmed. Then I installed 16.08.3 from Wolfgang's home, again no improvement.
Have you tried the okular5 package for 42.2? Your last entry in the bugreport still showed 16.08.2, where Johannes mentioned it's probably fixed in 17.08 (the okular5 from wolfi323 is at 17.12.1, like TW)
Looks like installing okular5 will mean updating lots of other stuff - libqt5core and such. -- Per Jessen, Zürich (8.6°C) http://www.dns24.ch/ - free dynamic DNS, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Op 25-01-18 om 14:38 schreef Per Jessen:
Koenraad Lelong wrote:
Hi,
On my Leap 42.2 laptop I can't print PDF's in their original size. When I print then they come out scaled to an A5 when the original is an A4. That's with Okular.
Yep, I've been having that very same problem for more than a year, it's a bit of a show-stopper for upgrading office machines. Sofar we're printing from acroread instead.
I installed FoxitReader and that does the job. Thanks. Koenraad. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
participants (4)
-
Carlos E. R. -
Koenraad Lelong -
Per Jessen -
Peter Suetterlin