Hi Masaru Followed your instructions, but after rebooting I can't start x, I get all sort of messages, I reverted to original xorg.conf, and fixed the sync parameters, but see an improvement on the gears, but the xorginfo still thinks I am using Mesa Masaru Nomiya wrote:

Hello,

In the Message;

Subject : [opensuse] x1600pro ATI and Suse10.3 Message-ID : <47364EAD.2080707@totaltravelmarketing.com> Date & Time: Sat, 10 Nov 2007 19:37:01 -0500

[Jose] == Jose has written:

Jose> I am trying to figure out how to make this ati software, I got the Jose> newest driver 8.42, installed, got to see the gears spinning on the Jose> popup window but when I try to access the catalyst control center, it Jose> sends messages saying that my ati driver is not working properly or my Jose> card has not support, I had it working on suse 10.2 but I don't know Jose> what is wrong with this part, I tried building that Jose> xorg-x11-libX11-7.2 but no game, I read that the x1600 were reporting Jose> problems with this driver, I tried then using one of the older Jose> drivers, but same result.

Jose> Has anybody tried making this model from ati to work and got sucess with it?

I tried to install 8.42.3 with ATI's x1600 XT card many times, but got same results as you.

Now, I'm using the driver 8.41.7.

What I always did is;

1. rpm -e $(rpm -qa | grep fglrx)

2. sh ./ati-driver-installer-8.41.7-x86.x86_64.run --buildpkg SuSE/SUSE102-AMD64

3. rpm -Uvh --force fglrx*.rpm

4. copy 10.2's xorg.conf to /etc/X11 <-- Don't use Sax2!

5. REBOOT

6. login as a usr

7. Yast2 --> Hardware --> keybord (root)

8. just touch setting

9. Click OK buton

10. Sax2 will appear, then "test" nad "save"

11. logout, and login again.

That's all

HTH,

--- 野宮 賢 mail-to: nomiya @ galaxy.dti.ne.jp

「先端技術の開発は、優れた頭脳を持つ人間が集中しないと成功しない。 しかし、技術開発と、それが何をもたらすかを考えることは別だ。 一人の人間に二つは望めない。」 -- M. Crichton --

-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

Hi Masaru, I got it working, now I installed compiz-fusion, but for some reason, it's very very slow, just to get a click or type anything takes minutes to see the result, have you experienced this or anybody? Don't know why it's behaving like this Thanks again for your time and advise Jose Masaru Nomiya wrote:

Hello,

In the Message;

Subject : Re: [opensuse] x1600pro ATI and Suse10.3 Message-ID : <473774D2.6040008@totaltravelmarketing.com> Date & Time: Sun, 11 Nov 2007 16:32:02 -0500

[Jose] == Jose has written:

Jose> Followed your instructions, but after rebooting I can't start Jose> x, I get all sort of messages, I reverted to original xorg.conf, and Jose> fixed the sync parameters, but see an improvement on the gears, but the Jose> xorginfo still thinks I am using Mesa

Sorry, I've forgotten to tell you xorg's upgrade.

I upgraded xorg from;

http://ftp.skynet.be/pub/software.opensuse.org/xorg73/openSUSE_10.3/

Then, I could install 8.41.7.

How about this?

1. Upgrade xorg.

2. rpm -e $(rpm -qa | grep fglrx)

3. sh ./ati-driver-installer-8.41.7-x86.x86_64.run

4. linux/usr/share # ati/uninstall <-- for clean up

5. sh ./ati-driver-installer-8.41.7-x86.x86_64.run --buildpkg SuSE/SUSE102-AMD64

6. rpm -Uvh --force fglrx*.rpm

7. sax2 -r -m 0=fglrx

Maybe you will get black screen.

8. Ctrl+Alt+Del

If kdm start, login as an user.

9. Yst2 --> Hardware --> Keybord (or Mouse)

10. Click OK button

11. sax2 starts, and you will be able to configure display's setting

HTH,

--- 野宮 賢 mail-to: nomiya @ galaxy.dti.ne.jp

"Bill! You married with Computers. Not with Me!" "No..., with money."

-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

Thanks Masaru, I would check this tonight from home and post results Jose Masaru Nomiya wrote:

Hello,

In the Message;

Subject : Re: [opensuse] x1600pro ATI and Suse10.3 Message-ID : <4737D4CC.4030609@totaltravelmarketing.com> Date & Time: Sun, 11 Nov 2007 23:21:32 -0500

[Jose] == Jose has written:

Jose> I got it working, now I installed compiz-fusion, but for some reason, Jose> it's very very slow, just to get a click or type anything takes minutes Jose> to see the result, have you experienced this or anybody?

What's the result of;

...

glxinfo | grep direct

Mine is;

direct rendering: Yes

And more, how about the result of fglrx? Mene is ;

...

fglrxinfo

display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: Radeon X1600 Series OpenGL version string: 2.0.6849 Release

does your xorg.conf include;

Section "Module" Load "glx" Load "type1" Load "extmod" Load "dbe" Load "freetype" Load "dri" <-- this line? EndSection

HTH,

Regards,

--- 野宮 賢 mail-to: nomiya @ galaxy.dti.ne.jp

「eメールや携帯電話に縛られた社会は、自分自身と向き合ったり、 空想にふけったりする自由を奪う。」 -- M. Crichton --

-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

On Monday 12 November 2007 06:23:35 pm Jose wrote:

Hi Masaru,

I get glxinfo | grep-i direct direct rendering: No Opengl renderer string: Mesa GLX Indirect

fglrxinfo

display: :0.0 screen: 0 OpenGL vendor string: Mesa project: www.mesa3d.org OpenGL renderer string: Mesa GLX Indirect OpenGL version string: 1.2 (1.5 Mesa 6.5.2)

My module has the same options than yours, anything else I could check?

Have you tried this? http://en.opensuse.org/ATI_Radeon_Xpress I got locked computer every time before I run: aticonfig --initial --input=/etc/X11/xorg.conf This should work for other Radeon XPRESS cards. The second line with sax is probably overkill, as all that is needed is module 'dri' as Masaru described. -- Regards, Rajko. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

On Monday 12 November 2007 09:15:31 pm Jose wrote:

Rajko M. wrote:

...

Have you tried this? http://en.opensuse.org/ATI_Radeon_Xpress

I got locked computer every time before I run: aticonfig --initial --input=/etc/X11/xorg.conf

This should work for other Radeon XPRESS cards.

The second line with sax is probably overkill, as all that is needed is module 'dri' as Masaru described.

yeap, tried it, same problem very very slow, if I click on any menu, nothing shows up, I know compiz is working because I can action the cubes and I see the effects on the frames, but I am practically stuck

Can you post /var/log/Xorg.0.log and /etc/X11/xorg.conf ? -- Regards, Rajko. Please see -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

On Monday 12 November 2007 09:47:00 pm Jose wrote:

Hi

Here are the files, thanks!

Suse103:~ # cat /etc/X11/xorg.conf ... Section "Monitor" Option "CalcAlgorithm" "XServerPool" DisplaySize 305 230 HorizSync 31-48 Identifier "Monitor[0]" ModelName "1024X768@60HZ" Option "DPMS" VendorName "--> VESA" VertRefresh 50-60 UseModes "Modes[0]" EndSection

This is seems somewhat modest. Try to replace this section with: Section "Monitor" Identifier "Monitor[0]" UseModes "Modes[0]" EndSection This will allow Xorg server to setup monitor on it's own which helped me to setup dual screen when sax2 couldn't see 2 monitors.

Suse103:/var/log # cat Xgl.0.log ...

:-) Now, while I look again in /etc/X11/xorg.conf can you post: cat /var/log/Xorg.0.log not Xgl.0.log. Xgl is listed as X server, but it works on top of Xorg, so we need Xorg.0.log to see what fglrx driver did. Probably 3D is not enabled.

Rajko M. wrote: ...

...

Can you post /var/log/Xorg.0.log and /etc/X11/xorg.conf ?

-- Regards, Rajko. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

Suse103:/var/log # cat /var/log/Xorg.0.log X Window System Version 7.2.0 Release Date: Wed Oct 24 14:18:36 UTC 2007 X Protocol Version 11, Revision 0, Release 7.2 Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux Suse103 2.6.22.12-0.1-default #1 SMP 2007/11/06 23:05:18 UTC i686 Build Date: 24 October 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 12 22:03:15 2007 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout[all]" (**) |-->Screen "Screen[0]" (0) (**) | |-->Monitor "Monitor[0]" (**) | |-->Device "Device[0]" (**) |-->Input Device "Keyboard[0]" (**) |-->Input Device "Mouse[1]" (WW) The directory "/usr/share/fonts/local" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/PEX" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/latin2/misc" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/latin2/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/latin2/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/latin2/Type1" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/latin7/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/baekmuk" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/japanese" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/kwintv" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/CID" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/ucs/misc" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/ucs/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/ucs/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/hellas/misc" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/hellas/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/hellas/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/hellas/Type1" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/misc/sgi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/xtest" does not exist. Entry deleted from font path. (**) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/Type1, /usr/share/fonts/URW, /usr/share/fonts/Speedo, /usr/share/fonts/cyrillic, /usr/share/fonts/truetype, /usr/share/fonts/uni:unscaled, /opt/kde3/share/fonts (==) RgbPath set to "/usr/share/X11/rgb" (**) Input device list set to "/dev/gpmdata,/dev/input/mice" (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules" (**) Option "AllowMouseOpenFail" "on" (**) Option "Xinerama" "off" (**) Option "IgnoreABI" "on" (**) Ignoring ABI Version (**) Extension "DAMAGE" is disabled (II) Open ACPI successful (/var/run/acpid.socket) (II) Loader magic: 0x81ea560 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.2 X.Org XInput driver : 0.7 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.2 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2770 card 8086,2580 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,2771 card 0000,0000 rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1b:0: chip 8086,27d8 card 1043,8237 rev 01 class 04,03,00 hdr 00 (II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 01 class 06,04,00 hdr 81 (II) PCI: 00:1c:3: chip 8086,27d6 card 0000,0000 rev 01 class 06,04,00 hdr 81 (II) PCI: 00:1d:0: chip 8086,27c8 card 1043,8179 rev 01 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,27c9 card 1043,8179 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,27ca card 1043,8179 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:3: chip 8086,27cb card 1043,8179 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,27cc card 1043,8179 rev 01 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev e1 class 06,04,01 hdr 01 (II) PCI: 00:1f:0: chip 8086,27b8 card 1043,8179 rev 01 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,27df card 1043,8179 rev 01 class 01,01,8a hdr 00 (II) PCI: 00:1f:2: chip 8086,27c0 card 1043,2601 rev 01 class 01,01,8f hdr 00 (II) PCI: 00:1f:3: chip 8086,27da card 1043,8179 rev 01 class 0c,05,00 hdr 00 (II) PCI: 01:03:0: chip 1283,8211 card 1043,8138 rev 11 class 01,80,00 hdr 00 (II) PCI: 02:00:0: chip 11ab,4362 card 1043,8142 rev 19 class 02,00,00 hdr 00 (II) PCI: 04:00:0: chip 1002,71c0 card 174b,0880 rev 00 class 03,00,00 hdr 80 (II) PCI: 04:00:1: chip 1002,71e0 card 174b,0881 rev 00 class 03,80,00 hdr 00 (II) PCI: End of PCI scan (II) Intel Bridge workaround enabled (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 4: bridge is at (0:1:0), (0,4,4), BCTRL: 0x000a (VGA_EN is set) (II) Bus 4 I/O range: [0] -1 0 0x0000e000 - 0x0000efff (0x1000) IX[B] (II) Bus 4 non-prefetchable memory range: [0] -1 0 0xcff00000 - 0xcfffffff (0x100000) MX[B] (II) Bus 4 prefetchable memory range: [0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:28:0), (0,3,3), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 3 I/O range: [0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] [1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:28:3), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B] [1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B] [2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B] [3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xcfe00000 - 0xcfefffff (0x100000) MX[B] (II) Subtractive PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B] [1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B] [2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B] [3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B] [4] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B] [5] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B] [6] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B] [7] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xcfd00000 - 0xcfdfffff (0x100000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(4:0:0) ATI Technologies Inc RV530 [Radeon X1600] rev 0, Mem @ 0xd0000000/28, 0xcffe0000/16, I/O @ 0xe000/8, BIOS @ 0xcffc0000/17 (--) PCI: (4:0:1) ATI Technologies Inc RV530 [Radeon X1600] (Secondary) rev 0, Mem @ 0xcfff0000/16 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xcfefc000 - 0xcfefffff (0x4000) MX[B] [1] -1 0 0xcfcffc00 - 0xcfcfffff (0x400) MX[B] [2] -1 0 0xcfcff800 - 0xcfcffbff (0x400) MX[B] [3] -1 0 0xcfcf8000 - 0xcfcfbfff (0x4000) MX[B] [4] -1 0 0xcfff0000 - 0xcfffffff (0x10000) MX[B](B) [5] -1 0 0xcffc0000 - 0xcffdffff (0x20000) MX[B](B) [6] -1 0 0xcffe0000 - 0xcffeffff (0x10000) MX[B](B) [7] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [8] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B] [9] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [10] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B] [11] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [12] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B] [13] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B] [14] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [15] -1 0 0x00008400 - 0x0000840f (0x10) IX[B] [16] -1 0 0x00008800 - 0x00008803 (0x4) IX[B] [17] -1 0 0x00009000 - 0x00009007 (0x8) IX[B] [18] -1 0 0x00009400 - 0x00009403 (0x4) IX[B] [19] -1 0 0x00009800 - 0x00009807 (0x8) IX[B] [20] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [25] -1 0 0x00008000 - 0x0000801f (0x20) IX[B] [26] -1 0 0x00007800 - 0x0000781f (0x20) IX[B] [27] -1 0 0x00007400 - 0x0000741f (0x20) IX[B] [28] -1 0 0x00007000 - 0x0000701f (0x20) IX[B] [29] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xcfefc000 - 0xcfefffff (0x4000) MX[B] [1] -1 0 0xcfcffc00 - 0xcfcfffff (0x400) MX[B] [2] -1 0 0xcfcff800 - 0xcfcffbff (0x400) MX[B] [3] -1 0 0xcfcf8000 - 0xcfcfbfff (0x4000) MX[B] [4] -1 0 0xcfff0000 - 0xcfffffff (0x10000) MX[B](B) [5] -1 0 0xcffc0000 - 0xcffdffff (0x20000) MX[B](B) [6] -1 0 0xcffe0000 - 0xcffeffff (0x10000) MX[B](B) [7] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [8] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B] [9] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [10] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B] [11] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [12] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B] [13] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B] [14] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [15] -1 0 0x00008400 - 0x0000840f (0x10) IX[B] [16] -1 0 0x00008800 - 0x00008803 (0x4) IX[B] [17] -1 0 0x00009000 - 0x00009007 (0x8) IX[B] [18] -1 0 0x00009400 - 0x00009403 (0x4) IX[B] [19] -1 0 0x00009800 - 0x00009807 (0x8) IX[B] [20] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [25] -1 0 0x00008000 - 0x0000801f (0x20) IX[B] [26] -1 0 0x00007800 - 0x0000781f (0x20) IX[B] [27] -1 0 0x00007400 - 0x0000741f (0x20) IX[B] [28] -1 0 0x00007000 - 0x0000701f (0x20) IX[B] [29] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xcfefc000 - 0xcfefffff (0x4000) MX[B] [5] -1 0 0xcfcffc00 - 0xcfcfffff (0x400) MX[B] [6] -1 0 0xcfcff800 - 0xcfcffbff (0x400) MX[B] [7] -1 0 0xcfcf8000 - 0xcfcfbfff (0x4000) MX[B] [8] -1 0 0xcfff0000 - 0xcfffffff (0x10000) MX[B](B) [9] -1 0 0xcffc0000 - 0xcffdffff (0x20000) MX[B](B) [10] -1 0 0xcffe0000 - 0xcffeffff (0x10000) MX[B](B) [11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [14] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B] [15] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [16] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B] [17] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [18] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B] [19] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B] [20] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [21] -1 0 0x00008400 - 0x0000840f (0x10) IX[B] [22] -1 0 0x00008800 - 0x00008803 (0x4) IX[B] [23] -1 0 0x00009000 - 0x00009007 (0x8) IX[B] [24] -1 0 0x00009400 - 0x00009403 (0x4) IX[B] [25] -1 0 0x00009800 - 0x00009807 (0x8) IX[B] [26] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [31] -1 0 0x00008000 - 0x0000801f (0x20) IX[B] [32] -1 0 0x00007800 - 0x0000781f (0x20) IX[B] [33] -1 0 0x00007400 - 0x0000741f (0x20) IX[B] [34] -1 0 0x00007000 - 0x0000701f (0x20) IX[B] [35] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B](B) (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules//extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "type1" (II) Loading /usr/lib/xorg/modules//fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.2.0, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules//extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules//extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (==) AIGLX disabled (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules//extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "fglrx" (II) Loading /usr/lib/xorg/modules//drivers/fglrx_drv.so (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 7.1.0, module version = 8.42.3 Module class: X.Org Video Driver (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules//input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.2.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.7 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules//input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.2.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.7 (II) Primary Device is: PCI 04:00:0 (II) ATI Proprietary Linux Driver Version Identifier:8.42.3 (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.423.2 (II) ATI Proprietary Linux Driver Build Date: Oct 19 2007 16:13:26 (WW) fglrx: No matching Device section for instance (BusID PCI:4:0:1) found (--) Chipset Supported AMD Graphics Processor (0x71C0) found (II) AMD Video driver is running on a device belonging to a group targeted for this release (II) AMD Video driver is signed (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xcfefc000 - 0xcfefffff (0x4000) MX[B] [5] -1 0 0xcfcffc00 - 0xcfcfffff (0x400) MX[B] [6] -1 0 0xcfcff800 - 0xcfcffbff (0x400) MX[B] [7] -1 0 0xcfcf8000 - 0xcfcfbfff (0x4000) MX[B] [8] -1 0 0xcfff0000 - 0xcfffffff (0x10000) MX[B](B) [9] -1 0 0xcffc0000 - 0xcffdffff (0x20000) MX[B](B) [10] -1 0 0xcffe0000 - 0xcffeffff (0x10000) MX[B](B) [11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [14] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B] [15] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [16] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B] [17] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [18] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B] [19] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B] [20] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [21] -1 0 0x00008400 - 0x0000840f (0x10) IX[B] [22] -1 0 0x00008800 - 0x00008803 (0x4) IX[B] [23] -1 0 0x00009000 - 0x00009007 (0x8) IX[B] [24] -1 0 0x00009400 - 0x00009403 (0x4) IX[B] [25] -1 0 0x00009800 - 0x00009807 (0x8) IX[B] [26] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [31] -1 0 0x00008000 - 0x0000801f (0x20) IX[B] [32] -1 0 0x00007800 - 0x0000781f (0x20) IX[B] [33] -1 0 0x00007400 - 0x0000741f (0x20) IX[B] [34] -1 0 0x00007000 - 0x0000701f (0x20) IX[B] [35] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B](B) (II) fglrx(0): pEnt->device->identifier=0x8206748 (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xcfefc000 - 0xcfefffff (0x4000) MX[B] [5] -1 0 0xcfcffc00 - 0xcfcfffff (0x400) MX[B] [6] -1 0 0xcfcff800 - 0xcfcffbff (0x400) MX[B] [7] -1 0 0xcfcf8000 - 0xcfcfbfff (0x4000) MX[B] [8] -1 0 0xcfff0000 - 0xcfffffff (0x10000) MX[B](B) [9] -1 0 0xcffc0000 - 0xcffdffff (0x20000) MX[B](B) [10] -1 0 0xcffe0000 - 0xcffeffff (0x10000) MX[B](B) [11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B] [18] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [19] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B] [20] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [21] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B] [22] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B] [23] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [24] -1 0 0x00008400 - 0x0000840f (0x10) IX[B] [25] -1 0 0x00008800 - 0x00008803 (0x4) IX[B] [26] -1 0 0x00009000 - 0x00009007 (0x8) IX[B] [27] -1 0 0x00009400 - 0x00009403 (0x4) IX[B] [28] -1 0 0x00009800 - 0x00009807 (0x8) IX[B] [29] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [30] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [34] -1 0 0x00008000 - 0x0000801f (0x20) IX[B] [35] -1 0 0x00007800 - 0x0000781f (0x20) IX[B] [36] -1 0 0x00007400 - 0x0000741f (0x20) IX[B] [37] -1 0 0x00007000 - 0x0000701f (0x20) IX[B] [38] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) fglrx(0): === [atiddxPreInit] === begin, [x] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 7.2.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.2 (II) fglrx(0): PCI bus 4 card 0 func 0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (**) fglrx(0): Option "NoAccel" "no" (**) fglrx(0): Option "NoDRI" "no" (**) fglrx(0): Option "Capabilities" "0x00000000" (**) fglrx(0): Option "CapabilitiesEx" "0x00000000" (**) fglrx(0): Option "GammaCorrectionI" "0x00000000" (**) fglrx(0): Option "GammaCorrectionII" "0x00000000" (**) fglrx(0): Option "OpenGLOverlay" "off" (**) fglrx(0): Option "VideoOverlay" "on" (**) fglrx(0): Option "ScreenOverlap" "0" (**) fglrx(0): Option "UseInternalAGPGART" "no" (**) fglrx(0): Option "Stereo" "off" (**) fglrx(0): Option "StereoSyncEnable" "1" (**) fglrx(0): Option "UseFastTLS" "0" (**) fglrx(0): Option "BlockSignalsOnLock" "on" (**) fglrx(0): Option "ForceGenericCPU" "no" (**) fglrx(0): Option "CenterMode" "off" (**) fglrx(0): Option "PseudoColorVisuals" "off" (**) fglrx(0): Option "DPMS" (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (8 bit DAC) (**) fglrx(0): Gamma Correction for I is 0x00000000 (**) fglrx(0): Gamma Correction for II is 0x00000000 (==) fglrx(0): Buffer Tiling is ON (--) fglrx(0): Chipset: "Radeon X1600 Series" (Chipset = 0x71c0) (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x0880) (--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 (--) fglrx(0): MMIO registers at 0xcffe0000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (**) fglrx(0): Option "mtrr" "off" (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.2 (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.1.0 ABI class: X.Org Video Driver, version 1.2 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 3.0 (II) fglrx(0): VESA VBE Total Mem: 16384 kB (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS (II) fglrx(0): VESA VBE OEM Software Rev: 9.12 (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: RV530 (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (II) fglrx(0): ATI Video BIOS revision 9 or later detected drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 6, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 6, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 6, (OK) drmGetBusid returned '' (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 7.1.0, module version = 8.42.3 ABI class: X.Org Server Extension, version 0.3 (--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR3 (II) fglrx(0): PCIE card detected (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) Loading sub module "ddc" (II) LoadModule: "ddc"(II) Module already built-in (II) fglrx(0): Connected Display1: CRT on secondary DAC [crt2] (II) fglrx(0): Display1: No EDID information from DDC. (II) fglrx(0): Display1: Failed to get EDID information. (WW) fglrx(0): Only one display is connnected,so single mode is enabled (II) fglrx(0): Primary Controller - CRT on secondary DAC (II) fglrx(0): Internal Desktop Setting: 0x00000001 (II) fglrx(0): POWERplay version 3. 1 power state available: (II) fglrx(0): 1. 587/693MHz @ 0Hz [low voltage, enable load balancing] (**) fglrx(0): Qbs disabled (==) fglrx(0): FAST_SWAP disabled (**) fglrx(0): PseudoColor visuals disabled (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) (**) fglrx(0): Center Mode is disabled (==) fglrx(0): TMDS coherent mode is enabled (II) fglrx(0): Total of 8 modes found for primary display. (--) fglrx(0): Virtual size is 1024x768 (pitch 0) (**) fglrx(0): *Mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (I) (II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 interlace +vsync (**) fglrx(0): *Mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz (II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 (**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz (II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 (**) fglrx(0): *Mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525 (**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D) (II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan (**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D) (II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan (**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D) (II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan (**) fglrx(0): Display dimensions: (305, 230) mm (**) fglrx(0): DPI set to (85, 84) (--) fglrx(0): Virtual size is 1024x768 (pitch 1024) (**) fglrx(0): *Mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (I) (II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 interlace +vsync (**) fglrx(0): *Mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz (II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 (**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz (II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 (**) fglrx(0): *Mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525 (**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D) (II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan (**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D) (II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan (**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D) (II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac"(II) Module already built-in (**) fglrx(0): NoAccel = NO (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.2.0 ABI class: X.Org Video Driver, version 1.2 (==) fglrx(0): HPV inactive (**) fglrx(0): NoDRI = NO (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so (II) fglrx(0): Depth moves disabled by default (**) fglrx(0): Capabilities: 0x00000000 (**) fglrx(0): CapabilitiesEx: 0x00000000 (**) fglrx(0): cpuFlags: 0x8000001d (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (**) fglrx(0): ATI GART size: 256 MB (II) fglrx(0): [pcie] 258048 kB allocated with handle 0xdeadbeef (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536 (**) fglrx(0): UseFastTLS=0 (**) fglrx(0): BlockSignalsOnLock=1 (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xcffe0000 - 0xcffeffff (0x10000) MX[B] [1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B] [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [6] -1 0 0xcfefc000 - 0xcfefffff (0x4000) MX[B] [7] -1 0 0xcfcffc00 - 0xcfcfffff (0x400) MX[B] [8] -1 0 0xcfcff800 - 0xcfcffbff (0x400) MX[B] [9] -1 0 0xcfcf8000 - 0xcfcfbfff (0x4000) MX[B] [10] -1 0 0xcfff0000 - 0xcfffffff (0x10000) MX[B](B) [11] -1 0 0xcffc0000 - 0xcffdffff (0x20000) MX[B](B) [12] -1 0 0xcffe0000 - 0xcffeffff (0x10000) MX[B](B) [13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) [17] 0 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B] [21] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [22] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B] [23] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [24] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B] [25] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B] [26] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [27] -1 0 0x00008400 - 0x0000840f (0x10) IX[B] [28] -1 0 0x00008800 - 0x00008803 (0x4) IX[B] [29] -1 0 0x00009000 - 0x00009007 (0x8) IX[B] [30] -1 0 0x00009400 - 0x00009403 (0x4) IX[B] [31] -1 0 0x00009800 - 0x00009807 (0x8) IX[B] [32] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [33] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [34] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [35] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [36] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [37] -1 0 0x00008000 - 0x0000801f (0x20) IX[B] [38] -1 0 0x00007800 - 0x0000781f (0x20) IX[B] [39] -1 0 0x00007400 - 0x0000741f (0x20) IX[B] [40] -1 0 0x00007000 - 0x0000701f (0x20) IX[B] [41] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B](B) [42] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [43] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0 (II) fglrx(0): detected X.org 7.1.0.0 (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing DRIScreenInit drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 6, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 6, (OK) drmOpenByBusid: Searching for BusID PCI:4:0:0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 6, (OK) drmOpenByBusid: drmOpenMinor returns 6 drmOpenByBusid: drmGetBusid reports drmOpenDevice: node name is /dev/dri/card1 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -19 drmOpenDevice: node name is /dev/dri/card2 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -19 drmOpenDevice: node name is /dev/dri/card3 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -19 drmOpenDevice: node name is /dev/dri/card4 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -19 drmOpenDevice: node name is /dev/dri/card5 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -19 drmOpenDevice: node name is /dev/dri/card6 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -19 drmOpenDevice: node name is /dev/dri/card7 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -19 drmOpenDevice: node name is /dev/dri/card8 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -19 drmOpenDevice: node name is /dev/dri/card9 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -19 drmOpenDevice: node name is /dev/dri/card10 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -19 drmOpenDevice: node name is /dev/dri/card11 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -19 drmOpenDevice: node name is /dev/dri/card12 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -19 drmOpenDevice: node name is /dev/dri/card13 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -19 drmOpenDevice: node name is /dev/dri/card14 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -19 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 6, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 6, (OK) drmGetBusid returned '' (II) fglrx(0): [drm] DRM interface version 1.0 (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:4:0:0" (II) fglrx(0): [drm] added 8192 byte SAREA at 0x7a000 (II) fglrx(0): [drm] mapped SAREA 0x7a000 to 0xb7f5f000 (II) fglrx(0): [drm] framebuffer handle = 0x7b000 (II) fglrx(0): [drm] added 1 reserved context for kernel (II) fglrx(0): DRIScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.42.3 (II) fglrx(0): Date: Oct 19 2007 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.22.9-0.4-default (II) fglrx(0): Build-Kernel MODVERSIONS: no (II) fglrx(0): Build-Kernel __SMP__: no (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [drm] register handle = 0x0007c000 (II) fglrx(0): Interrupt handler installed at IRQ 16. (II) fglrx(0): Exposed events to the /proc interface (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01000000 (II) fglrx(0): FBMM initialized for area (0,0)-(1024,4096) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption) (II) fglrx(0): Largest offscreen area available: 1024 x 3328 (==) fglrx(0): Backing store disabled (II) Loading extension FGLRXEXTENSION (II) Loading extension ATITVOUT (**) fglrx(0): DPMS enabled (**) fglrx(0): Textured Video is enabled. (II) LoadModule: "glesx" (II) Loading /usr/lib/xorg/modules//glesx.so (II) Module glesx: vendor="X.Org Foundation" compiled for 7.1.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension GLESX (II) fglrx(0): GLESX enableFlags = 16 (II) fglrx(0): GLESX is enabled (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Solid Lines Dashed Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 20 256x256 slots 6 512x512 slots (II) fglrx(0): Acceleration enabled (WW) fglrx(0): Option "FSAADisableGamma" is not used (WW) fglrx(0): Option "FSAAMSPosX3" is not used (WW) fglrx(0): Option "FSAAMSPosX4" is not used (WW) fglrx(0): Option "FSAAMSPosY1" is not used (WW) fglrx(0): Option "FSAAScale" is not used (WW) fglrx(0): Option "FSAAMSPosY2" is not used (WW) fglrx(0): Option "FSAAMSPosX5" is not used (WW) fglrx(0): Option "FSAAMSPosX0" is not used (WW) fglrx(0): Option "FSAAMSPosY3" is not used (WW) fglrx(0): Option "FSAAMSPosY4" is not used (WW) fglrx(0): Option "FSAACustomizeMSPos" is not used (WW) fglrx(0): Option "FSAAMSPosY5" is not used (WW) fglrx(0): Option "FSAAEnable" is not used (WW) fglrx(0): Option "FSAAMSPosX1" is not used (WW) fglrx(0): Option "FSAAMSPosX2" is not used (WW) fglrx(0): Option "FSAAMSPosY0" is not used (WW) fglrx(0): Option "CalcAlgorithm" is not used (II) fglrx(0): X context handle = 0x1 (II) fglrx(0): [DRI] installation complete (II) fglrx(0): Direct rendering enabled [atiddx] ASYNCIO init succeed! (==) fglrx(0): Silken mouse enabled (==) fglrx(0): Using hardware cursor (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension XAccessControlExtension (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Loading local sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/lib/xorg/modules//extensions/libGLcore.so (II) Module GLcore: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) GLX: Initialized MESA-PROXY GL provider for screen 0 (**) Option "CoreKeyboard" (**) Keyboard[0]: Core Keyboard (**) Option "Protocol" "Standard" (**) Keyboard[0]: Protocol: Standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) Keyboard[0]: XkbRules: "xfree86" (**) Option "XkbModel" "microsoftpro" (**) Keyboard[0]: XkbModel: "microsoftpro" (**) Option "XkbLayout" "us" (**) Keyboard[0]: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard[0]: CustomKeycodes disabled (**) Option "Protocol" "explorerps/2" (**) Mouse[1]: Device: "/dev/input/mice" (**) Mouse[1]: Protocol: "explorerps/2" (**) Option "CorePointer" (**) Mouse[1]: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Buttons" "9" (==) Mouse[1]: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Mouse[1]: ZAxisMapping: buttons 4 and 5 (**) Mouse[1]: Buttons: 13 (**) Mouse[1]: Sensitivity: 1 (II) XINPUT: Adding extended input device "Mouse[1]" (type: MOUSE) (II) XINPUT: Adding extended input device "Keyboard[0]" (type: KEYBOARD) (II) Mouse[1]: ps2EnableDataReporting: succeeded SetClientVersion: 0 9 AUDIT: Mon Nov 12 22:03:22 2007: 4349 X: client 17 rejected from local host (uid 1000) (II) fglrx(0): Shutdown CMMQS (II) fglrx(0): [drm] removed 1 reserved context for kernel (II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x7a000 at 0xb7f5f000 Suse103:/var/log # Rajko M. wrote:

On Monday 12 November 2007 09:47:00 pm Jose wrote:

...

Hi

Here are the files, thanks!

Suse103:~ # cat /etc/X11/xorg.conf

... Section "Monitor" Option "CalcAlgorithm" "XServerPool" DisplaySize 305 230 HorizSync 31-48 Identifier "Monitor[0]" ModelName "1024X768@60HZ" Option "DPMS" VendorName "--> VESA" VertRefresh 50-60 UseModes "Modes[0]" EndSection

This is seems somewhat modest. Try to replace this section with:

Section "Monitor" Identifier "Monitor[0]" UseModes "Modes[0]" EndSection

This will allow Xorg server to setup monitor on it's own which helped me to setup dual screen when sax2 couldn't see 2 monitors.

...

Suse103:/var/log # cat Xgl.0.log

...

:-)

Now, while I look again in /etc/X11/xorg.conf can you post:

cat /var/log/Xorg.0.log

not Xgl.0.log. Xgl is listed as X server, but it works on top of Xorg, so we need Xorg.0.log to see what fglrx driver did. Probably 3D is not enabled.

...

Rajko M. wrote:

...

...

...

Can you post /var/log/Xorg.0.log and /etc/X11/xorg.conf ?

-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

On Tuesday 13 November 2007 20:41, Rajko M. wrote:

On Tuesday 13 November 2007 06:27, Jose wrote:

I commented nicely xorg.conf and than found: http://suseforums.net/index.php?showtopic=39985

with link to: http://dev.compiz-fusion.org/~cyberorg/2007/10/17/1-click-ati-drivers/ with older ATI drivers. Try that.

Don't forget to remove old driver first, otherwise YaST may ignore update. -- Regards, Rajko. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

On Wednesday 14 November 2007 09:04:45 am Jose wrote:

Thanks Rajko, I would give it a try tonight

Rajko M. wrote:

...

On Tuesday 13 November 2007 20:41, Rajko M. wrote:

...

On Tuesday 13 November 2007 06:27, Jose wrote:

I commented nicely xorg.conf and than found: http://suseforums.net/index.php?showtopic=39985

with link to: http://dev.compiz-fusion.org/~cyberorg/2007/10/17/1-click-ati-drivers/ with older ATI drivers. Try that.

Don't forget to remove old driver first, otherwise YaST may ignore update.

Direct to source: http://opensuse-community.org/ati-legacy.ymp above link will start installation of older ATI driver that should work fine with your card. -- Regards, Rajko. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

On Thursday 15 November 2007 07:56:27 am Jose wrote:

Hi Raiko,

Tried, but same result, I get the different window decoration, rotating cube as soon as I enable xgl, but it becomes slow to the bone, I am afraid.

Again, /var/log/Xorg.0.log and this time also run '3Ddiag' and post output. I noticed something, that is same in your previous Xorg.0.log and in http://suseforums.net/index.php?showtopic=39985 (II) fglrx(0): Shutdown CMMQS (II) fglrx(0): [drm] removed 1 reserved context for kernel (II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x2000 at 0xb7bfe000 but I still can't find anything relevant. Have you tried to compile driver as in http://en.opensuse.org/ATI ? Have you removed old driver? Have you tried to use 10.2 xorg.config file with 10.3? -- Regards, Rajko. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

On Friday 16 November 2007 07:43:58 am Jose wrote:

Sucess!!

I endup disabling xgl, but then I went into the software management, and checked what version of fglrx was active according to Suse, it was pointning to the new driver, without uninstalling I selected the lower version and that led to suse wanting to install the proper version of the driver again, I went with it, and after that I opened the xlgfr gui management interface and I selected enable compiz and enable compiz-fusion, rebooted and now I have compiz fully functional, only flaw I detected it's that if I raise my resolution above 1024x764 that disabled 3d and good bye compiz with that, is this a known bug?, or is supposed to work with any resolution allowed by the driver?

https://bugzilla.novell.com/show_bug.cgi?id=338790 is the only one that has ATI graphic adapter and compiz in name. The resolution problem can be bug, there was one thread about low resolution on monitor that can give much higher. The problem was how monitor was presented to SaX2. The size was 15" and graphic driver used 800x600 which is native resolution for that size. Looking in your xorg.conf from previous posts, it seems that you have more luck: DisplaySize 305 230 is also 15". If you monitor is 17" that can be corrected in YaST > Hardware > Graphic Card and Monitor. When window opens press button Change in the same line with monitor name. It will open second window where you can select tab Display Size, and correct monitor size. From your Xorg.0.log is obvious: 1- ATI driver can't read EDID information from monitor and set it up automatically, 2- your card has 2 VGA connectors and monitor is currently connected to second. That should not make difference, but in some cases it can: 1- graphic card has no connected pins that are used to read EDID information from second VGA connector (hardware error) 2- driver is programmed to read first VGA connector, but not second (software error) I already wrote about this in one of previous emails. What I did with older monitors is to check display size, horizontal and vertical frequencies (third tab Sync Frequencies), with monitor manual or manufacturer web page.

Domo arigato Rajko

Doitashi mashite. (Thanks to Google, Japanese is not my native language :-) ) ... -- Regards, Rajko. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

Jose wrote:

Hi Rajko,

You know what, I think I solved the mistery, or at least figured out, what happens it's that I was using the configure desktop option, but instead I should have used sax2 instead to change the resolution, the ati config software keeps poping up a window saying that either there is not driver installed or is not working properly, so I can't use that piece of software at the moment to configure settings, but seems to be working with sax2, I haven't tried the max resolution I can get out of my monitor, but for now, I was able to go to a higher resolution.

Those wouldn't be /usr/lib/libGL.so (.1) (.1.2) and /usr/lib/libIndirect.so.1 (.1.2) would it? -- David C. Rankin, J.D., P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

Jose wrote:

Hi David,

I think they are: Suse103:/usr/lib # ls -ls libIn* 0 lrwxrwxrwx 1 root root 20 Nov 3 17:04 libIndirectGL.so.1 -> libIndirectGL.so.1.2 436 -rwxr-xr-x 1 root root 440676 Sep 21 21:34 libIndirectGL.so.1.2 Suse103:/usr/lib # ls -ls libGL* 0 lrwxrwxrwx 1 root root 26 Nov 11 10:06 libGL.so -> /usr/lib/xorg/libGL.so.1.2 0 lrwxrwxrwx 1 root root 26 Nov 11 10:06 libGL.so.1 -> /usr/lib/xorg/libGL.so.1.2 0 lrwxrwxrwx 1 root root 10 Nov 11 10:06 libGL.so.1.2 -> libGL.so.1 0 lrwxrwxrwx 1 root root 11 Nov 10 14:48 libGLU.so -> libGLU.so.1 0 lrwxrwxrwx 1 roo5800 Sep 21 21:34 libGLU.so.1.3.070001 0 lrwxrwxrwx 1 root root 16 Nov 3 17:04 libGLcore.so.1 -> libGLcore.so.1.0 8 -rwxr-xr-x 1 root root 4912 Sep 21 21:34 libGLcore.so.1.0 Suse103:/usr/lib #

Are those interfiering with ATI? David C. Rankin wrote:

...

Jose wrote:

...

Hi Rajko,

You know what, I think I solved the mistery, or at least figured out, what happens it's that I was using the configure desktop option, but instead I should have used sax2 instead to change the resolution, the ati config software keeps poping up a window saying that either there is not driver installed or is not working properly, so I can't use that piece of software at the moment to configure settings, but seems to be working with sax2, I haven't tried the max resolution I can get out of my monitor, but for now, I was able to go to a higher resolution.

Those wouldn't be /usr/lib/libGL.so (.1) (.1.2) and /usr/lib/libIndirect.so.1 (.1.2) would it?

The radeon drivers and libraries seem to be having major problems, especially in my case. I have 3 semi-related bugs open dealing with the driver and library issues. The gory details are at: https://bugzilla.novell.com/show_bug.cgi?id=338930 https://bugzilla.novell.com/show_bug.cgi?id=338947 https://bugzilla.novell.com/show_bug.cgi?id=340459 Let us cross our fingers that "progress" will be made. The drivers on my laptop with the mobility radeon 9700 are so crippled the only way I can log in and log out without the system hanging is NO 3D at all. Instead of the wonderful compiz I used to enjoy on the laptop, now frame rates are barely over 200 fps. Hopefully, this issue the issue with the ATI drivers and libraries is getting some attention. To Novell's credit, they are very aware of the issue, but are somewhat hamstrung with the closed source reverse-engineered driver and the fglrx driver AMD is putting out is well out of step with the needed libraries. Good luck with your issues. -- David C. Rankin, J.D., P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org