_______________________________________________________________________________________ Note: This e-mail is subject to the disclaimer contained at the bottom of this message. _______________________________________________________________________________________ Hi All, Have just been playing with s2disk/s2ram. For the first time I've been able to get s2disk working properly on my machine running OpenSus 10.2, all barring one problem. I have an adaptec 2940u2w card in the machine (Asus P4B800). The card drives an LTO1 drive and one SCSI 146GB drive. At first after resume I was getting kernel panics relating to the aic7xxx driver. I realised this was due to my tapeware software running as a daemon (accessing the scsi bus). I disabled the tape daemon (don't need it anyway) and found on resume that everything was OK. Until I tried to query lvm. The 146GB SCSI sits in a volume group (along with 4 other Sata drives). Any access to that drive causes a kernel panic. Ok. So I reduce the vg and remove the SCSI drive. Now everything works perfectly. Through experimentation I have found that I can unload and reload all SCSI modules at suspend/wake providing they are not in use at the time. The only problem here is that I obviously can't reduce out a disk and re-add it the the vg every time I go into standby so consequently I can't make use of the 146GB drive. Any help you could offer would be very much appreciated. Thanks. Cheers, Rick. _______________________________________________________________________________________ The information transmitted in this message and its attachments (if any) is intended only for the person or entity to which it is addressed. The message may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information, by persons or entities other than the intended recipient is prohibited. If you have received this in error, please contact the sender and delete this e-mail and associated material from any computer. The intended recipient of this e-mail may only use, reproduce, disclose or distribute the information contained in this e-mail and any attached files, with the permission of the sender. This message has been scanned for viruses with Symantec Scan Engine and cleared by MailMarshal. _______________________________________________________________________________________ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org