Tor Sigurdsson wrote:

Hi, Just add: Option "RightAlt" "ModeShift" for XFree 4, or RightAlt ModeShift for XFree 3.3.x, in your XF86Config under the keyboard section.

Thanks for the advice, but it did not do the trick, nor did the various other suggestions I got . Strange case of the vanishing latin keymap, I guess. Because I couldn't figure out what to do next, I used the other obvious option, barring suicide: I reinstalled the whole thing. God. How can a distribution grow in a few months! Anyway, two hours later I was back in business, with a working fr keyboard map complete with Alt Gr,, but with a snag: my SCSI scanner was not working anymore. In fact, the Adaptec Scsi card was not even detected on boot up. On checking the boot messages, I found this strange message from outer space: "Atapi device hdd" "error - bot ready - sense key = 0x02" "(reserved error code " {thanks guys, this really helps} "--lax=0x30, asco=ax01)" "The failed "read cd/dvd capacity" packet was "25 00 00 00 00 00 00 00 00 00 00 00 " (Linus/Alan Cox work in wondrous ways...} I should explain that I have an IDE DVD on hdc, and an IDE CD writer on hdd; scsi emulation is enabled,; and the two drives have been working happily since the beginning of time (or when SuSE 7 came out, whichever came first). So I booted on the SuSE DVD, aborted the installation, chose "load modules", selected the AIC7XXX scsi module, and got an error message, complaining that the module could not be loaded, followed by the very same message I quoted earlier, which appears on every boot. After which the module is loaded anyway (I checked with: "check loaded modulmes" or whatever the command is. And the scanner works. But if I reboot, all is lost (I mean, the Scsi card...). Scsi emulation works fine, I can burn CD's. But why isn't the Scsi card detected anymore, and what can I do to load it? I would appreciate the input of the list's Wise Men. Fx

...

My Alt Gr key does not seem to be working anymore.

Problem is I can't say when it stopped working exactly. I have been fiddling quite a bit with my configuration after upgrading my motherboard, processor, memory and video card. Having problems configuring my ATI Expert 98, I installed Xfree 4.02 from the SuSe FTP site, and later went back to the original SuSe 7 Xfree 4. That might have done it.

I am running SuSe 7 with kde 2.01. The problem appears with all window managers.

The key works fine in console mode, so my keyboard definition (pc105 - be) is fine.

Can anyone offer a suggestion?

Thanks

Fx Fraipont

-- ______________________ Courtesy of SuSE Linux Kernel 2.2.18 (who Kares?)

-- ______ /---------------------------------------\ \ | Þór Sigurðsson | Tor Sigurdsson | t | | Netmaður | Network Specialist | o | |-----------------------------------------| s | | tosi@rhi.hi.is | i | \---------------------------------------/_____/

-- ______________________ Courtesy of SuSE Linux Kernel 2.2.18 (who Kares?)

Hello Doug, on Wednesday, January 03, 2001 at 22:00:19 -0500, you sat in front of your keyboard and wrote:

I have heard of the "alt gr" key before. Where is it on the keyboard? I have 2 alt keys, but no gr key. I have a standard pc kb. What am I missing? --doug

The Alt Gr key is generally the one on the right side of the space bar. Regards... -- Jean-François Bocquet ================================+ http://tns01.free.fr | ··· Linux User #177410| | GPG publickey: http://tns01.free.fr/pubkey.asc | fingerprints: 4E98 A7F2 6C26 6554 9562 C64E 5548 BF94 DE59 0A12 | =================================+ | -----BEGIN GEEK CODE BLOCK------ +------------------------------------+ Version: 3.12 Comment: For info see http://www.geekcode.com GCS/S d-- s:+ a- C++ UL+>++ P+ L+++>++++ E W++ N+ o+ K- !w O? M? V? PS PE- Y+ PGP+ t+ 5? X++ R tv++ b+ DI- D+ G e+ h! r-- y? ------END GEEK CODE BLOCK------